The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Mangosteen peel waste as a sustainable precursor for high surface area mesoporous activated carbon: Characterization and application for methylene blue removal
Abstract
The aim of this study was the production of high surface area activated carbon (AC) under optimized synthesis conditions from Mangosteen Peels (MP) waste using a single step ZnCl2 activation process. The influence of the various activation parameters such as impregnation ratio, impregnation time, carbonization time, and carbonization temperature on surface area and pore characteristics of synthesized AC was investigated. The AC prepared under optimized conditions showed BET surface area, average pore diameter, and total pore volume of 1621.8 m2/g, 4.4 nm, and 1.805 cm3/g, respectively. The optimized synthesis conditions were as follows: 1:4 impregnation ratio, 600 °C calcination temperature, and 30 min calcination time. The characteristics of the optimized AC were analyzed using nitrogen adsorption-desorption isotherm, scanning electron microscopy, pore structural analysis, Fourier transformed infrared spectroscopy and X-Ray diffraction analysis. The adsorption capacity of activated carbon prepared under optimized conditions for methylene blue was 1193 mg/g. Equilibrium data was best fitted to the Langmuir isotherm, while adsorption kinetics was favorably described by the pseudo-second-order kinetic model. The findings reveal the feasibility of mangosteen peel waste to be used as a potential and cheap precursor for the preparation of high surface area mesoporous AC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pseudo-second order model for sorption processes
Ho, Y. S., & McKay, G. (1999) · Process Biochemistry · doi:10.1016/s0032-9592(98)00112-5 · Cited by 17,497
About the Theory of So-Called Adsorption of Soluble Substances
Lagergren, S. K. (1898) · Medical Entomology and Zoology · Cited by 5,210
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. II. LIQUIDS.1
Langmuir, I. (1917) · Journal of the American Chemical Society · doi:10.1021/ja02254a006 · Cited by 2,350
Adsorption of methylene blue onto bamboo-based activated carbon: Kinetics and equilibrium studies
HAMEED, B., DIN, A., & AHMAD, A. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.07.049 · Cited by 1,513
Prahas, D., Kartika, Y., Indraswati, N., & Ismadji, S. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.08.032 · Cited by 873
Cazetta, A. L., Vargas, A. M. M., Nogami, E. M., Kunita, M. H., Guilherme, M. R., Martins, A. C., Silva, T. L., Moraes, J. C. G., & Almeida, V. C. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.08.058 · Cited by 653
Adsorption of methylene blue onto jute fiber carbon: kinetics and equilibrium studies
Senthilkumaar, S., Varadarajan, P. R., Porkodi, K., & Subbhuraam, C. V. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.09.027 · Cited by 635
Activated carbons from lignocellulosic materials by chemical and/or physical activation: an overview
Rodríguez-Reinoso, F., & Molina-Sabio, M. (1992) · Carbon · doi:10.1016/0008-6223(92)90143-k · Cited by 627
Maneerung, T., Liew, J., Dai, Y., Kawi, S., Chong, C., & Wang, C.-H. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2015.10.047 · Cited by 595
Saka, C. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.020 · Cited by 549
Foo, K. Y., & Hameed, B. H. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.10.005 · Cited by 418
Sayğılı, H., & Güzel, F. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.055 · Cited by 400
Benhouria, A., Islam, M. A., Zaghouane-Boudiaf, H., Boutahala, M., & Hameed, B. H. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.02.030 · Cited by 385
Saucier, C., Adebayo, M. A., Lima, E. C., Cataluña, R., Thue, P. S., Prola, L. D. T., Puchana-Rosero, M. J., Machado, F. M., Pavan, F. A., & Dotto, G. L. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.02.026 · Cited by 345
Angın, D., Altintig, E., & Köse, T. E. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.164 · Cited by 312
Preparation of activated carbon from bituminous coal with phosphoric acid activation
Teng, H., Yeh, T.-S., & Hsu, L.-Y. (1998) · Carbon · doi:10.1016/s0008-6223(98)00127-4 · Cited by 296
High surface area mesoporous activated carbon-alginate beads for efficient removal of methylene blue
Nasrullah, A., Bhat, A. H., Naeem, A., Isa, M. H., & Danish, M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.10.045 · Cited by 287
Self-citationBio-ethanol from lignocellulose: Status, perspectives and challenges in Malaysia
Goh, C. S., Tan, K. T., Lee, K. T., & Bhatia, S. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2009.08.080 · Cited by 284
Liou, T.-H., & Wu, S.-J. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.06.056 · Cited by 279
Foo, K. Y., & Hameed, B. H. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.07.102 · Cited by 243
Sayğılı, H., Güzel, F., & Önal, Y. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.01.009 · Cited by 233
Production and characterization of activated carbon from sour cherry stones by zinc chloride
Angin, D. (2014) · Fuel · doi:10.1016/j.fuel.2013.04.060 · Cited by 229
Islam, M. A., Sabar, S., Benhouria, A., Khanday, W. A., Asif, M., & Hameed, B. H. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2017.01.016 · Cited by 228
Ahmad, M. A., & Alrozi, R. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.10.049 · Cited by 226
Preparing high surface area porous carbon from biomass by carbonization in a molten salt medium
Shang, H., Lu, Y., Zhao, F., Chao, C., Zhang, B., & Zhang, H. (2015) · RSC Advances · doi:10.1039/c5ra12406a · Cited by 222
Activated carbons prepared from phosphoric acid activation of grain sorghum
Diao, Y., Walawender, W. P., & Fan, L. T. (2002) · Bioresource Technology · doi:10.1016/s0960-8524(01)00100-6 · Cited by 219
Dye adsorption of mesoporous activated carbons produced from NaOH-pretreated rice husks
Lin, L., Zhai, S.-R., Xiao, Z.-Y., Song, Y., An, Q.-D., & Song, X.-W. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.03.048 · Cited by 217
Production of activated carbon from rubber wood sawdust
Srinivasakannan, C., & Zailani Abu Bakar, M. (2004) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2003.11.002 · Cited by 215
Foo, K. Y., & Hameed, B. H. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.11.002 · Cited by 209
Danish, M., Ahmad, T., Hashim, R., Said, N., Akhtar, M. N., Mohamad-Saleh, J., & Sulaiman, O. (2018) · Surfaces and Interfaces · doi:10.1016/j.surfin.2018.02.001 · Cited by 206
Self-citationSilva, T. L., Cazetta, A. L., Souza, P. S. C., Zhang, T., Asefa, T., & Almeida, V. C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.034 · Cited by 195
Borah, L., Goswami, M., & Phukan, P. (2015) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2015.02.013 · Cited by 178
Karaçetin, G., Sivrikaya, S., & İmamoğlu, M. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.09.006 · Cited by 157
Mahmoudi, K., Hosni, K., Hamdi, N., & Srasra, E. (2014) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-014-0216-y · Cited by 149
Selvaraju, G., & Bakar, N. K. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.09.056 · Cited by 147
Mohanty, K., Das, D., & Biswas, M. N. (2006) · Adsorption · doi:10.1007/s10450-006-0374-2 · Cited by 144
Sulaiman, N. S., Hashim, R., Amini, M. H. M., Danish, M., & Sulaiman, O. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.061 · Cited by 143
Self-citationOn the preparation and characterization of activated carbon from mangosteen shell
Chen, Y., Huang, B., Huang, M., & Cai, B.-Q. (2011) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2011.01.007 · Cited by 122
Gómez-Serrano, V., Correa, E. M. C., Fernández-González, C., Alexandre-Franco, M. F., & Macías-García, A. (2004) · Materials Letters · doi:10.1016/j.matlet.2004.10.064 · Cited by 120
Danish, M., Hashim, R., Ibrahim, M. N. M., & Sulaiman, O. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.06.003 · Cited by 119
Self-citationKhan, A. S., Man, Z. B., Bustam, M. A., Kait, C. F., Nasrullah, A., Ullah, Z., Sarwono, A., Ahamd, P., & Muhammad, N. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.103 · Cited by 96
Self-citationKinetics and thermodynamic parameters of ionic liquid pretreated rubber wood biomass
Khan, A. S., Man, Z., Bustam, M. A., Kait, C. F., Ullah, Z., Nasrullah, A., Khan, M. I., Gonfa, G., Ahmad, P., & Muhammad, N. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.09.012 · Cited by 93
Self-citationA low cost and highly efficient adsorbent (activated carbon) prepared from waste potato residue
Zhang, Z., Luo, X., Liu, Y., Zhou, P., Ma, G., Lei, Z., & Lei, L. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2014.11.024 · Cited by 88
Giraldo, L., & Moreno‐Piraján, J. C. (2012) · Journal of Chemistry · doi:10.1155/2012/120763 · Cited by 81
Pendyal, B. (1999) · Bioresource Technology · doi:10.1016/s0960-8524(98)00153-9 · Cited by 77
Al-Lagtah, N. M. A., Al-Muhtaseb, A. H., Ahmad, M. N., & Salameh, Y. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.01.043 · Cited by 77
Ghaedi, M., Ghazanfarkhani, M. D., Khodadoust, S., Sohrabi, N., & Oftade, M. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.10.039 · Cited by 70
Highly adsorptive mesoporous carbon from biomass using molten-salt route
Kong, W., Zhao, F. J., Guan, H., Zhao, Y., Hongsong, Z., & Zhang, B. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-9966-8 · Cited by 62
Zhou, Q., Jiang, X., Guo, Y., Zhang, G., & Jiang, W. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.03.045 · Cited by 35
A novel mangosteen peels derived hierarchical porous carbon for lithium sulfur battery
Xue, M., Chen, C., Ren, Z., Tan, Y., Li, B., & Zhang, C. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.08.090 · Cited by 34
Dai, J., Sun, J., Xie, A., He, J., Li, C., & Yan, Y. (2015) · RSC Advances · doi:10.1039/c5ra24774h · Cited by 25
Cited by
Jawad, A. H., Saud Abdulhameed, A., Wilson, L. D., Syed-Hassan, S. S. A., ALOthman, Z. A., & Rizwan Khan, M. (2021) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2020.09.070 · Cited by 425
KOH-activated biochar and chitosan composites for efficient adsorption of industrial dye pollutants
Su, X., Wang, X., Ge, Z., Bao, Z., Lin, L., Chen, Y., Dai, W., Sun, Y., Yuan, H., Yang, W., et al. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150387 · Cited by 296
Lütke, S. F., Igansi, A. V., Pegoraro, L., Dotto, G. L., Pinto, L. A. A., & Cadaval, T. R. S. (2019) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2019.103396 · Cited by 284
Novel approach for effective removal of methylene blue dye from water using fava bean peel waste
Bayomie, O. S., Kandeel, H., Shoeib, T., Yang, H., Youssef, N., & El-Sayed, M. M. H. (2020) · Scientific Reports · doi:10.1038/s41598-020-64727-5 · Cited by 284
Metadata
- Authors
- Nasrullah, A., Saad, B., Bhat, A. H., Khan, A. S., Danish, M., Isa, M. H., & Naeem, A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 211
- Pages
- 1190-1200
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2901775748
- Cited by
- 255
- References
- 51
- FWCI
- 9.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.