The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
A green, porous and eco-friendly magnetic geopolymer adsorbent for heavy metals removal from aqueous solutions
Abstract
Abstract Geopolymers are a class of synthesized amorphous aluminosilicate materials that can be used as an adsorbent for the removal of heavy metals. In this paper, the bentonite clay was employed to synthesize geopolymer that can remove heavy metals such as Cu(II), Pb(II), Ni(II), Cd(II), and Hg(II) from industrial wastewaters. The Fe3O4 nanoparticles were applied to modify the geopolymer and the use of a geopolymer/Fe3O4 nanocomposite as an efficient and magnetic adsorbent for heavy metals removal from aqueous solution was investigated in this work, for the first time. The influence of different contact time and initial concentrations of metal ions on sorption was examined and the best result was achieved in 2 min contact time in the presence of 0.05 g nanocomposite. The prepared geopolymer and nanocomposite samples were characterized by Fourier transform infrared spectroscopy spectra, field-emission scanning electron micrograph images, thermogravimetric analysis, energy dispersive X-ray analysis, X-ray diffraction pattern and Brunauer-Emmett-Teller analysis. The prepared magnetic geopolymer base on bentonite clay showed 99%, 99%, 92%, 96% and 92% removal efficiency for the sorption of copper, lead, nickel, cadmium, and mercury ions from industrial wastewaters. The present work includes diverse advantageous such as environmentally-friendly protocol, magnetic separation, inexpensive raw materials, easy and simple conditions and high yields as same as short adsorption times.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
Wei, B., & Yang, L. (2010) · Microchemical Journal · doi:10.1016/j.microc.2009.09.014 · Cited by 2,030
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Li, J., Wang, X., Zhao, G., Chen, C., Chai, Z., Alsaedi, A., Hayat, T., & Wang, X. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00543a · Cited by 1,856
Adsorption of a few heavy metals on natural and modified kaolinite and montmorillonite: A review
Bhattacharyya, K. G., & Gupta, S. S. (2008) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2007.12.008 · Cited by 1,525
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
Heavy metal contamination of soil and vegetables in suburban areas of Varanasi, India
Kumar Sharma, R., Agrawal, M., & Marshall, F. (2007) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2005.11.007 · Cited by 1,014
Rice Husk and Its Ash as Low-Cost Adsorbents in Water and Wastewater Treatment
Ahmaruzzaman, M., & Gupta, V. K. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie201477c · Cited by 872
Asfaram, A., Ghaedi, M., Agarwal, S., Tyagi, I., & Kumar Gupta, V. (2015) · RSC Advances · doi:10.1039/c4ra15637d · Cited by 726
Processing methods, characteristics and adsorption behavior of tire derived carbons: A review
Saleh, T. A., & Gupta, V. K. (2014) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2014.06.006 · Cited by 685
Geopolymers : structure, processing, properties and industrial applications
Provis, J. L., & van Deventer, J. S. J. (2009) · Cited by 674
Adsorption of heavy metal ions with carbon nanotubes
STAFIEJ, A., & PYRZYNSKA, K. (2007) · Separation and Purification Technology · doi:10.1016/j.seppur.2007.07.008 · Cited by 663
Saravanan, R., Mansoob Khan, M., Gupta, V. K., Mosquera, E., Gracia, F., Narayanan, V., & Stephen, A. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.04.035 · Cited by 635
Robati, D., Mirza, B., Rajabi, M., Moradi, O., Tyagi, I., Agarwal, S., & Gupta, V. K. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.131 · Cited by 610
Saravanan, R., Karthikeyan, N., Gupta, V. K., Thirumal, E., Thangadurai, P., Narayanan, V., & Stephen, A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2013.01.046 · Cited by 578
Ngah, W. S. W., & Fatinathan, S. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2007.12.006 · Cited by 567
Karthikeyan, S., Gupta, V. K., Boopathy, R., Titus, A., & Sekaran, G. (2012) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2012.06.022 · Cited by 546
Kołodyńska, D., Krukowska, J., & Thomas, P. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.08.088 · Cited by 539
Boron nitride-based materials for the removal of pollutants from aqueous solutions: A review
Yu, S., Wang, X., Pang, H., Zhang, R., Song, W., Fu, D., Hayat, T., & Wang, X. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.09.163 · Cited by 503
Regeneration of adsorbents and recovery of heavy metals: a review
Lata, S., Singh, P. K., & Samadder, S. R. (2015) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-014-0714-9 · Cited by 491
Demirbas, E., Dizge, N., Sulak, M. T., & Kobya, M. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.09.027 · Cited by 478
Gu, P., Zhang, S., Li, X., Wang, X., Wen, T., Jehan, R., Alsaedi, A., Hayat, T., & Wang, X. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2018.04.136 · Cited by 476
Saravanan, R., Khan, M. M., Gupta, V. K., Mosquera, E., Gracia, F., Narayanan, V., & Stephen, A. (2015) · RSC Advances · doi:10.1039/c5ra02557e · Cited by 443
Yu, B., Zhang, Y., Shukla, A., Shukla, S. S., & Dorris, K. L. (2001) · Journal of Hazardous Materials · doi:10.1016/s0304-3894(01)00198-4 · Cited by 333
Lalhruaitluanga, H., Jayaram, K., Prasad, M. N. V., & Kumar, K. K. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.005 · Cited by 305
Maleki, A. R. (2017) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2017.07.020 · Cited by 281
Self-citationMaleki, A. (2012) · Tetrahedron · doi:10.1016/j.tet.2012.07.034 · Cited by 271
Self-citationJavadian, H., Ghorbani, F., Tayebi, H.-A., & Asl, S. H. (2015) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.02.018 · Cited by 268
Bhatt, A. S., Sakaria, P. L., Vasudevan, M., Pawar, R. R., Sudheesh, N., Bajaj, H. C., & Mody, H. M. (2012) · RSC Advances · doi:10.1039/c2ra20347b · Cited by 246
Mosleh, S., Rahimi, M. R., Ghaedi, M., Dashtian, K., & Hajati, S. (2017) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2017.08.007 · Cited by 243
Duan, P., Yan, C., Zhou, W., & Ren, D. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.05.143 · Cited by 237
Maleki, A. (2013) · Tetrahedron Letters · doi:10.1016/j.tetlet.2013.01.123 · Cited by 230
Self-citationUltra-trace copper(II) detection and removal from wastewater using novel meso-adsorbent
Awual, M. R., Ismael, M., Khaleque, M. A., & Yaita, T. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.10.009 · Cited by 205
WANG, S., DONG, Y., HE, M., CHEN, L., & YU, X. (2009) · Applied Clay Science · doi:10.1016/j.clay.2008.07.028 · Cited by 193
In-situ FTIR analyses of bentonite under high-pressure
Alabarse, F., Conceição, R. V., Balzaretti, N. M., et al. (2010) · Applied Clay Science · doi:10.1016/j.clay.2010.11.017 · Cited by 181
Dashamiri, S., Ghaedi, M., Dashtian, K., Rahimi, M. R., Goudarzi, A., & Jannesar, R. (2016) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2016.02.008 · Cited by 177
Maleki, A. R., Eskandarpour, V., Rahimi, J., & Hamidi, N. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.069 · Cited by 111
Self-citationAzad, F. N., Ghaedi, M., Dashtian, K., Montazerozohori, M., Hajati, S., & Dil, E. A. (2015) · RSC Advances · doi:10.1039/c5ra08746e · Cited by 100
Lalhmunsiama, Lee, S.-M., & Tiwari, D. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.03.083 · Cited by 85
Maleki, A. R., Azizi, M., & Emdadi, Z. (2018) · Green Chemistry Letters and Reviews · doi:10.1080/17518253.2018.1547795 · Cited by 62
Self-citationHorst, M. F., Álvarez, M., & Lassalle, V. (2015) · Separation Science and Technology · doi:10.1080/01496395.2015.1086801 · Cited by 59
Jafari, M., Rahimi, M. R., Ghaedi, M., & Dashtian, K. (2017) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2017.07.011 · Cited by 59
FOOD CHAIN BIOMAGNIFICATION OF HEAVY METALS IN SAMPLES FROM THE LOWER PRUT FLOODPLAIN NATURAL PARK
David, I. G., Matache, M. L., Tudorache, A., Chișamera, G. B., Rozyłowicz, L., & Radu, G. L. (2012) · Environmental Engineering and Management Journal · doi:10.30638/eemj.2012.010 · Cited by 44
Cited by
Li, C., Wang, H., Liao, X., Xiao, R., Liu, K., Bai, J., Li, B., & He, Q. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127312 · Cited by 280
Ahmed, H. E. H., Mohammed, A. M. A., & Soylak, M. (2023) · Food Chemistry · doi:10.1016/j.foodchem.2023.136794 · Cited by 46
Metadata
- Authors
- Maleki, A., Hajizadeh, Z., Sharifi, V., & Emdadi, Z.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 215
- Pages
- 1233-1245
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2908914126
- Cited by
- 359
- References
- 43
- FWCI
- 18.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.