The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Adsorption of an anionic dye from aqueous medium by organoclays: equilibrium modeling, kinetic and thermodynamic exploration
Abstract
Adsorption of an anionic dye, remazole brilliant blue R (RBBR) from aqueous solution, on organically modified attapulgite (ATP) and bentonite (BNT) clays was investigated. Beneficiated attapulgite and bentonite clay samples were modified by the cationic surfactant cetyltrimethylammoniumbromide (CTAB) by the ion exchange method. The efficiency of these adsorbents for the uptake of RBBR was examined by a series of adsorption isotherms using a batch technique at three different temperatures. A modified Freundlich equation has been proposed to describe the isotherms and compared with Langmuir, Freundlich and Redlich–Peterson (RP) models. Predicated values of RBBR adsorbed on modified clay using Freundlich, modified Freundlich, and RP models were identical along with the normalized standard deviation for all three models. These values were lower than those of Langmuir model. Values of r2 for RP and modified Freundlich were found to be identical and better than that of Langmuir for all the isotherms. Adsorption of RBBR followed a pseudo second order kinetic model. Negative values of free energy change, ΔG indicated spontaneity of the adsorption of RBBR on both of organoclays. An increase in adsorption of RBBR with an increase in temperature may be attributed to activated adsorption and hence an endothermic process. This was further supported by positive values of heat of adsorption, ΔH. The adsorption capacity of modified attapulgite is lower than that of modified bentonite. However, considering the requirement of CTAB for modification of the clay, attapulgite is the more economical adsorbent than modified bentonite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gupta, V. K., Rastogi, A., & Nayak, A. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.09.065 · Cited by 644
Gupta, V. K., & Rastogi, A. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.06.104 · Cited by 556
Cited by
Tang, L., Yu, J., Pang, Y., Zeng, G., Deng, Y., Wang, J., Ren, X., Ye, S., Peng, B., & Feng, H. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.048 · Cited by 655
Adsorbent materials for ammonium and ammonia removal: A review
Han, B., Butterly, C., Zhang, W., He, J.-Z., & Chen, D. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124611 · Cited by 379
Maleki, A., Hajizadeh, Z., Sharifi, V., & Emdadi, Z. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.01.084 · Cited by 359
Fu, J., Xin, Q., Wu, X., Chen, Z., Yan, Y., Liu, S., Wang, M., & Xu, Q. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.09.017 · Cited by 348
Xiong, W., Zeng, Z., Li, X., Zeng, G., Xiao, R., Yang, Z., Zhou, Y., Zhang, C., Cheng, M., Hu, L., et al. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.07.084 · Cited by 294
Metadata
- Authors
- Bhatt, A. S., Sakaria, P. L., Vasudevan, M., Pawar, R. R., Sudheesh, N., Bajaj, H. C., & Mody, H. M.
- Venue
- RSC Advances
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2012
- Volume
- 2
- Issue
- 23
- Pages
- 8663
- ISSN
- 2046-2069 (ISSN-L)
- OpenAlex
- W2105348564
- Cited by
- 246
- References
- 2
- FWCI
- 9.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption of an anionic dye from aqueous medium by organoclays: equilibrium modeling, kinetic and thermodynamic exploration. https://app.cochat.ai/papers/10.1039/c2ra20347b
- The paper
- Bhatt, A. S., Sakaria, P. L., Vasudevan, M., Pawar, R. R., Sudheesh, N., Bajaj, H. C., & Mody, H. M. (2012). Adsorption of an anionic dye from aqueous medium by organoclays: equilibrium modeling, kinetic and thermodynamic exploration. RSC Advances. https://doi.org/10.1039/c2ra20347b
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.