The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Enhancement of PCM solidification using inorganic nanoparticles and an external magnetic field with application in energy storage systems
Abstract
Abstract Heat recovery is one of the solutions to reduce Carbon dioxide emission, and using latent heat thermal energy storage systems (LHTESS) can be a promising way for heat recovery. In the present article, for the first time, the effects of both inorganic nanoparticles as an additive to PCM (phase change materials) and magnetic field on the PCM solidification rate inside a porous energy storage system have been modeled. For this purpose, the mixture of CuO nanoparticles and water was used as NEPCM (nanoparticle-enhanced PCM), and an external magnetic field was applied to the system. The unsteady process of solidification inside the storage system was simulated by employing finite element method (FEM). The impacts of various parameters including Lorentz forces strength, CuO/water concentration, and Rayleigh number on the charging time have been evaluated. Solid fraction, temperature, and streamline contours have been plotted to study the solidification process locally. The results indicated that with augmenting the Hartmann number from 0 to 10, the solidification time was reduced up to 23.5% in average. On the other hand, the addition of nanoparticles to PCM with volume fractions up to 4% leads to, on average, a 14% decrease in the solidification time. The obtained results suggest to employ the magnetic field as an effective solution to accelerate the solidification in energy storage systems while to reinforce the influence of magnetic field; nanoparticles can be added to the PCM. Finally, the solidification time was correlated with three main design parameters, i.e. nanoparticle volume fraction, Hartmann and Rayleigh numbers with a mathematical expression.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent advances in modeling and simulation of nanofluid flows-Part I: Fundamentals and theory
Mahian, O., Kolsi, L., Amani, M., Estellé, P., Ahmadi, G., Kleinstreuer, C., Marshall, J. S., Siavashi, M., Taylor, R. A., Niazmand, H., et al. (2019) · Physics Reports · doi:10.1016/j.physrep.2018.11.004 · Cited by 949
Self-citationKhodadadi, J. M., & Hosseinizadeh, S. F. (2007) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2007.02.005 · Cited by 715
Ibrahim, N. I., Al-Sulaiman, F. A., Rahman, S., Yilbas, B. S., & Sahin, A. Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.169 · Cited by 580
Experimental and theoretical studies of nanofluid thermal conductivity enhancement: a review
Kleinstreuer, C., & Feng, Y. (2011) · Nanoscale Research Letters · doi:10.1186/1556-276x-6-229 · Cited by 501
Recent advances in modeling and simulation of nanofluid flows—Part II: Applications
Mahian, O., Kolsi, L., Amani, M., Estellé, P., Ahmadi, G., Kleinstreuer, C., Marshall, J. S., Taylor, R. A., Abu-Nada, E., Rashidi, S., et al. (2019) · Physics Reports · doi:10.1016/j.physrep.2018.11.003 · Cited by 501
Self-citationIsmail, K. A. R., Alves, C. L. F., & Modesto, M. S. (2001) · Applied Thermal Engineering · doi:10.1016/s1359-4311(00)00002-8 · Cited by 459
Numerical simulation for solidification in a LHTESS by means of nano-enhanced PCM
Sheikholeslami, M. (2018) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2018.03.013 · Cited by 423
Self-citationThermal conductivity enhancement of phase change materials for thermal energy storage: A review
Liu, L., Su, D., Tang, Y., & Fang, G. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.04.057 · Cited by 410
KKL correlation for simulation of nanofluid flow and heat transfer in a permeable channel
Sheikholeslami Kandelousi, M. (2014) · Physics Letters A · doi:10.1016/j.physleta.2014.09.046 · Cited by 362
Mahdi, J. M., & Nsofor, E. C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.11.036 · Cited by 322
Mahdi, J. M., & Nsofor, E. C. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.11.082 · Cited by 318
Numerical modeling of nano enhanced PCM solidification in an enclosure with metallic fin
Sheikholeslami, M. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.03.006 · Cited by 279
Self-citationHeat transfer enhancement of phase change composite material: Copper foam/paraffin
Wang, C., Lin, T., Li, N., & Zheng, H. (2016) · Renewable Energy · doi:10.1016/j.renene.2016.04.039 · Cited by 278
Nano-enhanced Phase Change Material for thermal management of BICPV
Sharma, S., Micheli, L., Chang, W., Tahir, A. A., Reddy, K. S., & Mallick, T. K. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.09.076 · Cited by 237
Mahdi, J. M., & Nsofor, E. C. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.02.016 · Cited by 224
Mahdi, J. M., & Nsofor, E. C. (2017) · Energy · doi:10.1016/j.energy.2017.03.060 · Cited by 192
Fuel economy in gasoline engines using Al2O3/TiO2 nanomaterials as nanolubricant additives
Ali, M. K. A., Fuming, P., Younus, H. A., et al. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.11.013 · Cited by 181
Solidification of a PCM with nanoparticles in triplex-tube thermal energy storage system
Mahdi, J. M., & Nsofor, E. C. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.130 · Cited by 180
Energy storage system based on nanoparticle-enhanced phase change material inside porous medium
Hossain, R., Mahmud, S., Dutta, A., & Pop, I. V. (2015) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.12.023 · Cited by 143
Convection effect on the melting process of nano-PCM inside porous enclosure
Tasnim, S. H., Hossain, R., Mahmud, S., & Dutta, A. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.01.073 · Cited by 126
Bazri, S., Badruddin, I. A., Naghavi, M. S., & Bahiraei, M. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.11.030 · Cited by 123
Nižetić, S., Arıcı, M., Bilgin, F., & Grubišić‐Čabo, F. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.164 · Cited by 117
Yuan, Y., Gao, X., Wu, H., et al. (2016) · Energy · doi:10.1016/j.energy.2016.11.058 · Cited by 116
Elbahjaoui, R., & El Qarnia, H. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.115 · Cited by 100
Fan, L., & Khodadadi, J. M. (2012) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4006305 · Cited by 88
Sensor technologies for the energy-water nexus – A review
Abegaz, B. W., Datta, T., & Mahajan, S. M. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.033 · Cited by 75
Hasadi, Y. M. F. E., & Khodadadi, J. M. (2013) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.4023542 · Cited by 66
Dadollahi, M., & Mehrpooya, M. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.171 · Cited by 62
Falco, M. D., Capocelli, M., Losito, G., & Piemonte, V. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.153 · Cited by 40
Application of nano emulsion method in a methanol powered diesel engine
Soni, D. K., & Gupta, R. (2017) · Energy · doi:10.1016/j.energy.2017.03.049 · Cited by 34
Gao, X., Yuan, Y., Cao, X., et al. (2017) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2017.03.005 · Cited by 32
Cited by
Wang, X., Li, W., Luo, Z., Wang, K., & Shah, S. P. (2022) · Energy and Buildings · doi:10.1016/j.enbuild.2022.111923 · Cited by 493
Heat transfer simulation of heat storage unit with nanoparticles and fins through a heat exchanger
Sheikholeslami, M., Haq, R.-U., Shafee, A., Li, Z., Elaraki, Y. G., & Tlili, I. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.003 · Cited by 369
Self-citationThermophysical properties and applications of nano-enhanced PCMs: An update review
Yang, L., Huang, J.-N., & Zhou, F. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112876 · Cited by 343
Solidification of PCM within a tank with longitudinal-Y shape fins and CuO nanoparticle
Hajizadeh, M. R., Keshteli, A. N., & Bach, Q.-V. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.114188 · Cited by 76
Nanoparticles Unveiled: Key Characteristics and Properties of Multifunctional Magnetic Nanoparticles
Serdaroğlu, G. (2025) · Multifunctional Magnetic Nanoparticles in Analytical and Environmental Chemistry · doi:10.1039/9781837675357-00083 · Cited by 1
Metadata
- Authors
- Sheikholeslami, M., & Mahian, O.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 215
- Pages
- 963-977
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2908805581
- Cited by
- 322
- References
- 31
- FWCI
- 33.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.