The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Activated carbon preparation from biomass feedstock: Clean production and carbon dioxide adsorption
Open accessAbstract
The current methods used for the production of activated carbon (AC) are often chemical and energy intensive and produce significant amount of chemical waste. Thus, clean production of AC is important to reduce its overall production cost and to limit the adverse effect on the environment. Therefore, the main aim of this study is to develop a clean method for AC production from woody biomass with low chemical consumption. Herein, this study reports a facile strategy for reducing chemical usages in the production of high-performance AC, by introducing a crucial pre-pyrolysis step before chemical activation of biomass. The ACs prepared were characterised using scanning electron microscopy, Fourier transform infrared spectroscopy, nitrogen and carbon dioxide gas adsorption measurements. All these characterisations indicated that produced ACs have similar physicochemical properties. The strategy reduced chemical use by 70% and produced high-performance ultra-microporous ACs with excellent carbon dioxide adsorption capacity (4.22–5.44 mmol m−2). The facile pre-pyrolysis method is recommended for further research as a cleaner activated carbon preparation method from biomass feedstock.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Sepehri, A., & Sarrafzadeh, M.-H. (2018) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2018.04.006 · Cited by 1,108
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Waste materials for activated carbon preparation and its use in aqueous-phase treatment: A review
Dias, J. M., Alvim-Ferraz, M. C. M., Almeida, M. F., Rivera-Utrilla, J., & Sánchez-Polo, M. (2007) · Journal of Environmental Management · doi:10.1016/j.jenvman.2007.07.031 · Cited by 862
A review on nano-TiO2 sol–gel type syntheses and its applications
Macwan, D. P., Dave, P. N., & Chaturvedi, S. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5378-y · Cited by 788
Preparation of activated carbon from lignin by chemical activation
Hayashi, J., Kazehaya, A., Muroyama, K., & Watkinson, A. P. (2000) · Carbon · doi:10.1016/s0008-6223(00)00027-0 · Cited by 743
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Role of chemical activation in the development of carbon porosity
Molina-Sabio, M., & Rodrı́guez-Reinoso, F. (2004) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2004.04.007 · Cited by 663
Munir, S., Daood, S. S., Nimmo, W., Cunliffe, A. M., & Gibbs, B. M. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2008.07.065 · Cited by 551
Mohamad Nor, N., Lau, L. C., Lee, K. T., & Mohamed, A. R. (2013) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2013.09.017 · Cited by 478
Wang, R., Wang, P., Yan, X., Lang, J., Peng, C., & Xue, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302077c · Cited by 475
Idris, S. S., Rahman, N. A., Ismail, K., Alias, A. B., Rashid, Z. A., & Aris, M. J. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.059 · Cited by 424
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Sayğılı, H., & Güzel, F. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.055 · Cited by 400
Serafin, J., Narkiewicz, U., Morawski, A. W., Wróbel, R. J., & Michalkiewicz, B. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.006 · Cited by 393
Nanospace engineering of KOH activated carbon
Romanos, J., Beckner, M., Rash, T., Firlej, L., Kuchta, B., Yu, P., Suppes, G., Wexler, C., & Pfeifer, P. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/1/015401 · Cited by 382
Yagmur, E., Ozmak, M., & Aktas, Z. (2008) · Fuel · doi:10.1016/j.fuel.2008.05.005 · Cited by 349
Life Cycle Assessment of activated carbon production from coconut shells
Arena, N., Lee, J., & Clift, R. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.073 · Cited by 313
Biomass derived low-cost microporous adsorbents for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2015) · Fuel · doi:10.1016/j.fuel.2015.01.032 · Cited by 300
Deng, S., Wei, H., Chen, T., Wang, B., Huang, J., & Yu, G. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.04.115 · Cited by 273
Toward a molecular design of porous carbon materials
Borchardt, L., Zhu, Q.-L., Casco, M. E., Berger, R., Zhuang, X., Kaskel, S., Feng, X., & Xu, Q. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.002 · Cited by 266
Zhang, C., Song, W., Ma, Q., Xie, L., Zhang, X., & Guo, H. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02764 · Cited by 244
Grover, D. P., Zhou, J. L., Frickers, P. E., & Readman, J. W. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.10.005 · Cited by 236
Self-citationProduction and characterization of activated carbon from sour cherry stones by zinc chloride
Angin, D. (2014) · Fuel · doi:10.1016/j.fuel.2013.04.060 · Cited by 229
Rashidi, N. A., & Yusup, S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.045 · Cited by 214
Microwave pyrolysis of rice straw to produce biochar as an adsorbent for CO2 capture
Huang, Y.-F., Chiueh, P.-T., Shih, C.-H., Lo, S.-L., Sun, L., Zhong, Y., & Qiu, C. (2015) · Energy · doi:10.1016/j.energy.2015.02.026 · Cited by 211
Niazi, L., Lashanizadegan, A., & Sharififard, H. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.026 · Cited by 199
Heidari, A., Younesi, H., Rashidi, A., & Ghoreyshi, A. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2013.06.007 · Cited by 195
CO2 Capture in the Sustainable Wheat-Derived Activated Microporous Carbon Compartments
Hong, S.-M., Jang, E., Dysart, A. D., Pol, V. G., & Lee, K. B. (2016) · Scientific Reports · doi:10.1038/srep34590 · Cited by 177
Park, J., Hung, I., Gan, Z., Rojas, O. J., Lim, K. H., & Park, S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.09.085 · Cited by 164
Preparation of microporous activated carbon and its modification for arsenic removal from water
Asadullah, M., Jahan, I., Ahmed, M. B., Adawiyah, P., Malek, N. H., & Rahman, M. S. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.06.019 · Cited by 141
Self-citationIn situ nitrogen enriched carbon for carbon dioxide capture
Thote, J. A., Iyer, K. S., Chatti, R. V., Labhsetwar, N. K., Biniwale, R. B., & Rayalu, S. S. (2009) · Carbon · doi:10.1016/j.carbon.2009.09.042 · Cited by 139
Sreńscek-Nazzal, J., Narkiewicz, U., Morawski, A. W., Wróbel, R. J., & Michalkiewicz, B. (2015) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.5b00294 · Cited by 139
Ultrathin, ethylenediamine-functionalized graphene oxide membranes on hollow fibers for CO2 capture
Zhou, F., Tien, H. N., Dong, Q., Xu, W. L., Li, H., Li, S., & Yu, M. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.11.080 · Cited by 136
Wei, H., Chen, H., Fu, N., Chen, J., Lan, G., Qian, W., Liu, Y., Lin, H., & Han, S. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.01.194 · Cited by 135
Microporous adsorbents for CO2 capture – a case for microporous polymers?
Xu, C., & Hedin, N. (2014) · Materials Today · doi:10.1016/j.mattod.2014.05.007 · Cited by 131
Sustainable packaging waste-derived activated carbon for carbon dioxide capture
Idrees, M., Rangari, V. K., & Jeelani, S. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.05.016 · Cited by 123
Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Zhu, X.-L., Wang, P.-Y., Peng, C., Yang, J., & Yan, X.-B. (2014) · Chinese Chemical Letters · doi:10.1016/j.cclet.2014.03.039 · Cited by 112
Dobele, G., Dizhbite, T., Gil, M. V., Volperts, A., & Centeno, T. A. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.09.010 · Cited by 95
Luo, L., Chen, T., Li, Z., Zhang, Z., Zhao, W., & Fan, M. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.03.014 · Cited by 92
Hierarchically structured activated carbon for ultracapacitors
Kim, M.-H., Kim, K., Park, S. M., & Roh, K. C. (2016) · Scientific Reports · doi:10.1038/srep21182 · Cited by 90
Sawant, S. Y., Munusamy, K., Somani, R. S., John, M., Newalkar, B. L., & Bajaj, H. C. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.037 · Cited by 85
Lee, T., Zubir, Z. A., Jamil, F. M., Matsumoto, A., & Yeoh, F.-Y. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.10.010 · Cited by 74
Martins, A. F., Cardoso, A. D. L., Stahl, J. A., & Diniz, J. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2006.04.024 · Cited by 64
He, X., Liu, J., Jiang, Y.-W., Muhammad, Y., Guan, H., Sun, J., Cui, X., Liao, D., & Tong, Z. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.12.031 · Cited by 54
Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Xiaoli, Жу, Peiyu, Wang, Chao, ......................................................, P., Juan, Yang, Xing-Bin, & Yan (2014) · 中国化学快报:英文版 · Cited by 53
Balsamo, M., Silvestre‐Albero, A., Silvestre‐Albero, J., Erto, A., Rodríguez-Reinoso, F., & Lancia, A. (2014) · Langmuir · doi:10.1021/la500780h · Cited by 49
Characterization of organic matter of plants from lakes by thermal analysis in a N2 atmosphere
Guo, F., Wu, F., Mu, Y., Hu, Y., Zhao, X., Meng, W., Giesy, J. P., & Lin, Y. (2016) · Scientific Reports · doi:10.1038/srep22877 · Cited by 46
Preparation and characterization of ordered porous carbons for increasing hydrogen storage behaviors
Lee, S., & Park, S. (2011) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2011.07.034 · Cited by 37
Cited by
Ghodake, G. S., Shinde, S. K., Kadam, A. A., Saratale, R. G., Saratale, G. D., Kumar, M., Palem, R. R., AL-Shwaiman, H. A., Elgorban, A. M., Syed, A., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126645 · Cited by 414
Environmental applications of carbon-based materials: a review
Gopinath, K. P., Vo, D.-V. N., Gnana Prakash, D., Adithya Joseph, A., Viswanathan, S., & Arun, J. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01084-9 · Cited by 375
Gayathiri, M., Pulingam, T., Lee, K. T., & Sudesh, K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.133764 · Cited by 356
Carbon-based material derived from biomass waste for wastewater treatment
Soffian, M. S., Abdul Halim, F. Z., Aziz, F., A.Rahman, M., Mohamed Amin, M. A., & Awang Chee, D. N. (2022) · Environmental Advances · doi:10.1016/j.envadv.2022.100259 · Cited by 309
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Metadata
- Authors
- Ahmed, M. B., Hasan Johir, M. A., Zhou, J. L., Ngo, H. H., Nghiem, L. D., Richardson, C., Moni, M. A., & Bryant, M. R.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 225
- Pages
- 405-413
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2931494196
- Cited by
- 281
- References
- 50
- FWCI
- 18.28
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.