The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Abstract
CO2 sorption at atmospheric and sub-atmospheric pressures is a key step towards carbon capture and sequestration (CCS) and materials capable of fast and efficient CO2 uptake are currently being studied extensively. Carbide-derived carbons (CDCs) show a very high sorption capacity for CO2 of up to 7.1 mol/kg at 0 °C and ambient pressure. This value is significantly higher than other carbon materials. Systematic experimental investigation of a large number of different CDCs derived from nano- and micrometer sized precursors with and without activation show a linear correlation between the CO2 uptake at a certain pressure and the pore volume. However, CO2 sorption is not limited by the total pore volume but only by pores smaller than a certain diameter. At 1 bar, pores smaller than 0.8 nm contribute the most to the CO2 uptake and at 0.1 bar pores smaller or equal to 0.5 nm are preferred. With lower total pressure, smaller pores contribute more to the measured amount of adsorbed CO2. The prediction of the CO2 uptake based on the pore volume for pores of a certain diameter is much more accurate than predictions based on the mean pore size or the specific surface area. This study provides guidelines for the design of materials with an improved ability to remove carbon dioxide from the environment at atmospheric and lower pressures.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“it has been reported that the narrow micropores play a decisive role in CO2 adsorption capacity [20-23].”
From Preparation of Microporous Carbon from Sargassum horneri by Hydrothermal Carbonization and KOH Activation for CO2 Capture (2018) · cites this paper as [22]
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Anomalous Increase in Carbon Capacitance at Pore Sizes Less Than 1 Nanometer
Chmiola, J., Yushin, G., Gogotsi, Y., Portet, C., Simon, P., & Taberna, P. L. (2006) · Science · doi:10.1126/science.1132195 · Cited by 4,022
Self-citationRecommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Is the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
The reaction of CO2 with ethanolamines
Danckwerts, P. V. (1979) · Chemical Engineering Science · doi:10.1016/0009-2509(79)85087-3 · Cited by 1,116
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Dietzel, P. D. C., Besikiotis, V., & Blom, R. (2009) · Journal of Materials Chemistry · doi:10.1039/b911242a · Cited by 689
Cited by
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Sun, M.-H., Huang, S.-Z., Chen, L.-H., Li, Y., Yang, X.-Y., Yuan, Z.-Y., & Su, B.-L. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00135a · Cited by 1,454
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
A search for selectivity to enable CO2 capture with porous adsorbents
Oschatz, M., & Antonietti, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02110k · Cited by 612
Metadata
- Authors
- Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y.
- Affiliations
- Drexel University (US)
- Korea Institute of Energy Research (KR)
- Corresponding author
- Gogotsi, Yury
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 4
- Issue
- 8
- Pages
- 3059
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2170455260
- Cited by
- 668
- References
- 38
- Citations by year
- 2026: 36 · 2025: 43 · 2024: 39 · 2023: 42 · 2022: 65 · 2021: 47 · 2020: 43 · 2019: 57 · 2018: 56 · 2017: 57 · 2016: 55 · 2015: 47 · 2014: 35 · 2013: 31 · 2012: 13
- FWCI
- 45.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Environmental Science (publishedVersion)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Adsorption, diffusion, and thermodynamic properties of materials
- Keywords
- carbide-derived carbon, CO2 sorption, pore size, carbon capture and storage, sub-atmospheric pressure, pore volume, micropores, activation, specific surface area, CO2 adsorption capacity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of pore size on carbon dioxide sorption by carbide derived carbon. https://app.cochat.ai/papers/10.1039/c1ee01176f
- The paper
- Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011). Effect of pore size on carbon dioxide sorption by carbide derived carbon. Energy & Environmental Science. https://doi.org/10.1039/c1ee01176f
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.