The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
A green route to sustainable alkali-activated materials by heat and chemical activation of lithium slag
Abstract
Abstract Lithium slag (LS) is a potential new resource for fabricating alkali-activated materials, however, few works have reported the utilization of LS in alkaline activation area. Herein, the mineral composition of LS was evaluated by Rietveld quantitative analysis and the mechanical properties of alkali-activated LS (AALS) were systematically investigated. Based on the above studies, a method of heat incorporating with chemical activation was carried out to further improve the reaction activity of LS. The results indicated that pre-heating facilitated the improvement of reaction activity of LS and the active amorphous constituents in LS dramatically increased from 17.3 wt% to 50.7 wt% after heat activation at 700 °C. Furthermore, we also found that more active constituents in LS enhanced the rate and degree of reaction and resulted in the increase of mechanical strength of AALS. The compressive strength of specimens (aged for 1d) increased from 12.8 MPa to 47.7 MPa because a denser microstructure was observed in specimens prepared by heat-activated LS resource. In addition, the mechanism of heat activation for LS was also investigated by thermogravimetric analysis (TGA) and in-situ X-ray diffraction (XRD) at different temperature step. The results illustrated that the defective crystals in LS tended to transform into glassy phases between 300 and 800 °C. And the transformation was more significant as the temperature rising.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
A review on the utilization of fly ash
Ahmaruzzaman, M. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.11.003 · Cited by 2,641
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Choubey, P. K., Kim, M.-S., Srivastava, R. R., Lee, J.-C., & Lee, J.-Y. (2016) · Minerals Engineering · doi:10.1016/j.mineng.2016.01.010 · Cited by 529
Choubey, P. K., Chung, K.-S., Kim, M.-S., Lee, J.-C., & Srivastava, R. R. (2017) · Minerals Engineering · doi:10.1016/j.mineng.2017.04.008 · Cited by 290
Cited by
Fan, C., Wang, B., Ai, H., Qi, Y., & Liu, Z. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128790 · Cited by 294
Self-citation
Metadata
- Authors
- Liu, Z., Wang, J., Jiang, Q., Cheng, G., Li, L., Kang, Y., & Wang, D.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 225
- Pages
- 1184-1193
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2934407334
- Cited by
- 186
- References
- 5
- FWCI
- 8.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.