The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Optimizing the synthesis of Fe/Al (Hydr)oxides-Biochars to maximize phosphate removal via response surface model
Abstract
Abstract Highly efficient and cost-effective adsorbents for phosphate (P) recovery are the key to control eutrophication and recover phosphorous from waste streams to enhance food production. This study assembled waste biomass (corn stalk, almond shell, and dairy manure)-derived biochars with Fe/Al (hydr)oxides through co-precipitation method. The fabricated biochar composites presented excellent performance for the adsorption of P due to good amounts of surface area, pore volume, and reactive surface hydroxyl sites. Response surface methodology (RSM) was applied to optimize the production conditions of the Fe–Al (hydr)oxides-biochars for maximizing the P removal. The effects of three key independent variables, i.e., Fe3+ concentration (0.2–1.0 mol L−1), Al3+ concentration (0.2–1.0 mol L−1), and mass-to-volume ratio (0.05–0.20 g mL−1) on the P removal were investigated. The synthesized composites outperformed other sorbents for the P removal, suggesting the synergistic effects of Fe/Al (hydr)oxides and biochar support. These results offer valuable insights to develop high-performance biochar-based composites for green and sustainable environmental remediation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xiong, X., Yu, I. K. M., Cao, L., Tsang, D. C. W., Zhang, S., & Ok, Y. S. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.06.163 · Cited by 532
Self-citationSun, Y., Yu, I. K. M., Tsang, D. C. W., Cao, X., Lin, D., Wang, L., Graham, N. J. D., Alessi, D. S., Komárek, M., Ok, Y. S., et al. (2019) · Environment International · doi:10.1016/j.envint.2019.01.047 · Cited by 489
Self-citationLi, R., Wang, J. J., Zhou, B., Awasthi, M. K., Ali, A., Zhang, Z., Lahori, A. H., & Mahar, A. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.02.125 · Cited by 406
Rafiq, M. K., Bachmann, R. T., Rafiq, M. T., Shang, Z., Joseph, S., & Long, R. (2016) · PLOS ONE · doi:10.1371/journal.pone.0156894 · Cited by 376
Environmental transformations and ecological effects of iron-based nanoparticles
Lei, C., Sun, Y., Tsang, D. C. W., & Lin, D. (2018) · Environmental Pollution · doi:10.1016/j.envpol.2017.09.052 · Cited by 347
Self-citationYang, X., Tsibart, A., Nam, H., Hur, J., El-Naggar, A., Tack, F. M. G., Wang, C.-H., Lee, Y. H., Tsang, D. C. W., & Ok, Y. S. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.11.042 · Cited by 205
Self-citationAdsorption of Heavy Metals on Mixed Fe-Al Oxides in the Absence or Presence of Organic Ligands
Violante, A., Ricciardella, M., & Pigna, M. (2003) · Water, Air, and Soil Pollution · doi:10.1023/a:1023662728675 · Cited by 91
Cited by
Riaz, M., Kamran, M., Fang, Y., Wang, Q., Cao, H., Yang, G., Deng, L., Wang, Y., Zhou, Y., Anastopoulos, I., et al. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123919 · Cited by 583
Self-citationBehaviors and influencing factors of the heavy metals adsorption onto microplastics: A review
Gao, X., Hassan, I., Peng, Y., Huo, S., & Ling, L. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128777 · Cited by 388
Self-citationLiu, J., Jiang, J., Meng, Y., Aihemaiti, A., Xu, Y., Xiang, H., Gao, Y., & Chen, X. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122026 · Cited by 356
Yuan, C., Gao, B., Peng, Y., Gao, X., Fan, B., & Chen, Q. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.144058 · Cited by 221
Self-citationShyam, S., Arun, J., Gopinath, K. P., Ribhu, G., Ashish, M., & Ajay, S. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131490 · Cited by 109
Metadata
- Authors
- Peng, Y., Sun, Y., Sun, R., Zhou, Y., Tsang, D. C. W., & Chen, Q.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 237
- Pages
- 117770
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2963970157
- Cited by
- 168
- References
- 7
- FWCI
- 15.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimizing the synthesis of Fe/Al (Hydr)oxides-Biochars to maximize phosphate removal via response surface model. https://app.cochat.ai/papers/10.1016/j.jclepro.2019.117770
- The paper
- Peng, Y., Sun, Y., Sun, R., Zhou, Y., Tsang, D. C. W., & Chen, Q. (2019). Optimizing the synthesis of Fe/Al (Hydr)oxides-Biochars to maximize phosphate removal via response surface model. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.117770
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.