The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing
Abstract
3D printing is becoming increasingly popular for construction owing to its reduced environmental impact and lower energy demand than conventional manufacturing. Rapid application of this technology relies largely on the development of high-performance cement-based composites compatible with 3D printers. This study aims to develop high-quality and sustainable cement-based composites containing microcrystalline cellulose (MCC) that can satisfy the requirements for 3D printing. The workability, rheological behavior, buildability, and mechanical properties of the cement-based composites for 3D printing were examined systematically. The rheological analysis revealed that the plastic viscosity and yield stress of mortars with 1 wt% MCC were increased by 20.9% and 190.0%, respectively, compared with those of mortars without MCC. The buildability of mortars with 1 wt% MCC was also improved, and the printed structure exhibited neither large cracks among the printed filaments nor distorted components in the printing process. Compared with the mortars without MCC, the 28-d compressive and flexural strengths of the mortars with 1 wt% MCC were increased by 18.6% and 12.5%, respectively. In addition, the carbon emissions from the overall life cycle of a printed residence were quantified by considering the material attributes of additive manufacturing and using software tools to conduct building information modeling (BIM)-enabled life cycle assessment (LCA) modeling. The results indicated that compared with the mortars without MCC at equivalent mechanical strengths, the mortars containing 1 wt% MCC could reduce the CO2 emissions by 6.82%. The comprehensive improvement in rheological properties and buildability as well as the environmental benefits can promote the sustainable industrial utilization of MCC-reinforced cement-based materials in the 3D-printing industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Duan, H., Wang, J., & Huang, Q. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.069 · Cited by 163
Self-citation
Cited by
On the environmental impacts of 3D printing technology
Khosravani, M. R., & Reinicke, T. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100689 · Cited by 284
Liu, C., Wang, X., Chen, Y., Zhang, C., Ma, L., Deng, Z., Chen, C., Zhang, Y., Pan, J., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104158 · Cited by 266
3-D printing of concrete: Beyond horizons
Khan, M. S., Sanchez, F., & Zhou, H. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106070 · Cited by 260
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Metadata
- Authors
- Long, W.-J., Tao, J.-L., Lin, C., Gu, Y.-C., Mei, L., Duan, H.-B., & Xing, F.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 239
- Pages
- 118054
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2969193009
- Cited by
- 220
- References
- 1
- FWCI
- 12.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing. https://app.cochat.ai/papers/10.1016/j.jclepro.2019.118054
- The paper
- Long, W.-J., Tao, J.-L., Lin, C., Gu, Y.-C., Mei, L., Duan, H.-B., & Xing, F. (2019). Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.118054
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.