3D printing to innovate biopolymer materials for demanding applications: A review

Alginate: Properties and biomedical applications

Lee, K. Y., & Mooney, D. J. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,218 · see citing works

3D bioprinting of tissues and organs

Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034 · see citing works

Silk-based biomaterials

Altman, G. H., Diaz, F., Jakuba, C., Calabro, T., Horan, R. L., Chen, J., Lu, H., Richmond, J., & Kaplan, D. L. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00353-8 · Cited by 3,458 · see citing works

Chitosan—A versatile semi-synthetic polymer in biomedical applications

Dash, M., Chiellini, E., Ottenbrite, R. M., & Chiellini, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.02.001 · Cited by 2,920 · see citing works

Functional and bioactive properties of collagen and gelatin from alternative sources: A review

Gómez-Guillén, M. C., Giménez, B., López-Caballero, M. E., & Montero, P. (2011) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2011.02.007 · Cited by 2,078 · see citing works

Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution

Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,992 · see citing works

Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink

Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904 · see citing works

25th Anniversary Article: Engineering Hydrogels for Biofabrication

Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901 · see citing works

3D bioprinting of collagen to rebuild components of the human heart

Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782 · see citing works

Materials design for bone-tissue engineering

Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,730 · see citing works

Green composites from sustainable cellulose nanofibrils: A review

Khalil, H. P. S. A., Bhat, A. H., & Yusra, A. F. I. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,584 · see citing works

3D Bioprinting Human Chondrocytes with Nanocellulose–Alginate Bioink for Cartilage Tissue Engineering Applications

Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528 · see citing works

Ionic Liquids and Their Interaction with Cellulose

Pinkert, A., Marsh, K. N., Pang, S., & Staiger, M. P. (2009) · Chemical Reviews · doi:10.1021/cr9001947 · Cited by 1,508 · see citing works

A review of melt extrusion additive manufacturing processes: I. Process design and modeling

Turner, B. N., Strong, R. J., & Gold, S. A. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,465 · see citing works

Carrageenans: Biological properties, chemical modifications and structural analysis – A review

Campo, V. L., Kawano, D. F., da Silva, D. B., & Carvalho, I. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.01.020 · Cited by 1,412 · see citing works

3D printed microfluidic devices: enablers and barriers

Waheed, S., Cabot, J. M., Macdonald, N. P., Lewis, T., Guijt, R. M., Paull, B., & Breadmore, M. C. (2016) · Lab on a Chip · doi:10.1039/c6lc00284f · Cited by 1,039 · see citing works

Chitosan as an environment friendly biomaterial – a review on recent modifications and applications

Bakshi, P. S., Selvakumar, D., Kadirvelu, K., & Kumar, N. S. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.10.113 · Cited by 1,020 · see citing works

3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels

Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,005 · see citing works

Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing

Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 978 · see citing works

Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability

Paxton, N. C., Smolan, W., Bock, T. A., Melchels, F. P. W., Gröll, J., & Jüngst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 959 · see citing works

Collagen for bone tissue regeneration

Ferreira, A. M., Gentile, P., Chiono, V., & Ciardelli, G. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.014 · Cited by 940 · see citing works

Chitin and chitosan in selected biomedical applications

Anitha, A., Sowmya, S. D., Kumar, P., Deepthi, S., Chennazhi, K. P., Ehrlich, H., Tsurkan, M. V., & Jayakumar, R. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.02.008 · Cited by 934 · see citing works

3D printing: Printing precision and application in food sector

Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858 · see citing works

3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration

Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840 · see citing works

Binder jetting: A review of process, materials, and methods

Ziaee, M., & Crane, N. B. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 826 · see citing works

Making flexible magnetic aerogels and stiff magnetic nanopaper using cellulose nanofibrils as templates

Olsson, R. T., Samir, M. A. S. A., Salazar‐Alvarez, G., Belova, L. M., Ström, V., Berglund, L. A., Ikkala, O. T., Nogués, J., & Gedde, U. W. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.155 · Cited by 808 · see citing works

Collagen scaffolds for tissue engineering

Glowacki, J., & Mizuno, S. (2007) · Biopolymers · doi:10.1002/bip.20871 · Cited by 798 · see citing works

On the mechanism of dissolution of cellulose

Lindman, B., Karlström, G., & Stigsson, L. (2010) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2010.04.016 · Cited by 792 · see citing works

Silk fibroin as biomaterial for bone tissue engineering

Melke, J., Midha, S., Ghosh, S., Ito, K., & Hofmann, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.09.005 · Cited by 790 · see citing works

Effects of Xanthan gum biopolymer on soil strengthening

Chang, I., Im, J., Prasidhi, A. K., & Cho, G.-C. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.10.026 · Cited by 789 · see citing works

Composition, molecular structure, properties, and modification of pulse starches: A review

Hoover, R., Hughes, T., Chung, H., & Liu, Q. (2009) · Food Research International · doi:10.1016/j.foodres.2009.09.001 · Cited by 788 · see citing works

Chitosan based hydrogels and their applications for drug delivery in wound dressings: A review

Hamedi, H., Moradi, S., Hudson, S. M., & Tonelli, A. E. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.114 · Cited by 761 · see citing works

A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing

Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Kadri, N. A., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 757 · see citing works

Additive manufacturing of biomaterials

Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. K. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 751 · see citing works

Recent Progress on Polymer Materials for Additive Manufacturing

Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 745 · see citing works

Alginate-based composite materials for wound dressing application:A mini review

Varaprasad, K., Jayaramudu, T., Vimala, K., Toro, C., & Sadiku, E. R. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116025 · Cited by 697 · see citing works

Photoinitiated crosslinking polymerisation

Decker, C. (1996) · Progress in Polymer Science · doi:10.1016/0079-6700(95)00027-5 · Cited by 688 · see citing works

Edible films from pectin: Physical-mechanical and antimicrobial properties - A review

Espitia, P. J. P., Du, W., Avena‐Bustillos, R. J., Soares, N. D. F. F., & McHugh, T. H. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.06.005 · Cited by 687 · see citing works

A review of bioactive plant polysaccharides: Biological activities, functionalization, and biomedical applications

Liu, J., Willför, S. M., & Xu, C. (2014) · Bioactive Carbohydrates and Dietary Fibre · doi:10.1016/j.bcdf.2014.12.001 · Cited by 641 · see citing works

Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications

Xu, T., Binder, K. W., Albanna, M. Z., Dice, D. D., Zhao, W., Yoo, J. J., & Atala, A. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015001 · Cited by 633 · see citing works

Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery

Gao, Q., He, Y., Fu, J., Liu, A., & Ma, L. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.031 · Cited by 633 · see citing works

Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y. Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 617 · see citing works

Applicability of protein and fiber-rich food materials in extrusion-based 3D printing

Lille, M., Nurmela, A., Nordlund, E., Metsä-Kortelainen, S., & Sozer, N. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.04.034 · Cited by 615 · see citing works

Scaffold development using 3D printing with a starch-based polymer

Lam, C. X. F., Mo, X., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614 · see citing works

High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC)

Sehaqui, H., Zhou, Q., & Berglund, L. A. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.003 · Cited by 572 · see citing works

Advances in 3D printing of thermoplastic polymer composites and nanocomposites

Valino, A. D., Dizon, J. R. C., Espera, A. H., Chen, Q., Messman, J. M., & Advíncula, R. C. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101162 · Cited by 571 · see citing works

Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications

González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562 · see citing works

Advancement on modification of chitosan biopolymer and its potential applications

Negm, N. A. M., Hefni, H. H. H., Abd‐Elaal, A. A., Badr, E. A. A., & Kana, M. T. H. A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.02.196 · Cited by 558 · see citing works

An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering

Kundu, J., Shim, J., Jang, J., Kim, S., & Cho, D. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 553 · see citing works

Starch-based nano-biocomposites

Xie, F., Pollet, É., Halley, P. J., & Avérous, L. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.002 · Cited by 551 · see citing works

Hyaluronic acid, a promising skin rejuvenating biomedicine: A review of recent updates and pre-clinical and clinical investigations on cosmetic and nutricosmetic effects

Bukhari, S. N. A., Roswandi, N. L., Waqas, M., Habib, H., Hussain, F., Khan, S., Sohail, M. F., Ramli, N. A., Thu, H. E., & Hussain, Z. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.188 · Cited by 551 · see citing works

Impact of rheological properties of mashed potatoes on 3D printing

Liu, Z., Zhang, M., Bhandari, B., & Yang, C. (2017) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.04.017 · Cited by 550 · see citing works

Application of xanthan gum as polysaccharide in tissue engineering: A review

Kumar, A., Rao, K. M., & Han, S. S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.009 · Cited by 543 · see citing works

Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering

Yang, X., Lu, Z., Wu, H., Li, W., Zheng, L. X., & Zhao, J. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.09.002 · Cited by 536 · see citing works

Linking rheology and printability of a multicomponent gel system of carrageenan-xanthan-starch in extrusion based additive manufacturing

Liu, Z., Bhandari, B., Prakash, S., Mantihal, S., & Zhang, M. (2018) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.08.026 · Cited by 532 · see citing works

Polymeric composites for powder-based additive manufacturing: Materials and applications

Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 527 · see citing works

Strong and Tough Cellulose Nanopaper with High Specific Surface Area and Porosity

Sehaqui, H., Zhou, Q., Ikkala, O. T., & Berglund, L. A. (2011) · Biomacromolecules · doi:10.1021/bm2008907 · Cited by 511 · see citing works

Repairing injured peripheral nerves: Bridging the gap

Deumens, R., Bozkurt, A., Meek, M. F., Marcus, M. A. E., Joosten, E. A. J., Weis, J., & Brook, G. A. (2010) · Progress in Neurobiology · doi:10.1016/j.pneurobio.2010.10.002 · Cited by 508 · see citing works

4D Biofabrication Using Shape‐Morphing Hydrogels

Kirillova, A., Maxson, R., Stoychev, G. V., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 498 · see citing works

Creating perfused functional vascular channels using 3D bio-printing technology

Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494 · see citing works

Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink

Nguyen, D., Hägg, D. A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., Kalogeropoulos, T., Zaunz, S., Concaro, S., Brittberg, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00690-y · Cited by 491 · see citing works

Structurally and Functionally Optimized Silk‐Fibroin–Gelatin Scaffold Using 3D Printing to Repair Cartilage Injury In Vitro and In Vivo

Shi, W., Sun, M., Hu, X., Ren, B., Cheng, J., Li, C., Duan, X., Fu, X., Zhang, J., Chen, H., et al. (2017) · Advanced Materials · doi:10.1002/adma.201701089 · Cited by 485 · see citing works

Investigation on lemon juice gel as food material for 3D printing and optimization of printing parameters

Yang, F., Zhang, M., Bhandari, B., & Liu, Y. (2018) · LWT · doi:10.1016/j.lwt.2017.08.054 · Cited by 479 · see citing works

Chemically Cross-Linked Cellulose Nanocrystal Aerogels with Shape Recovery and Superabsorbent Properties

Yang, X., & Cranston, E. D. (2014) · Chemistry of Materials · doi:10.1021/cm502873c · Cited by 478 · see citing works

Investigation on fish surimi gel as promising food material for 3D printing

Wang, L., Zhang, M., Bhandari, B., & Yang, C. (2017) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.02.029 · Cited by 477 · see citing works

Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds

Mondschein, R. J., Kanitkar, A., Williams, C. B., Verbridge, S. S., & Long, T. E. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.005 · Cited by 477 · see citing works

3D printing technology: The new era for food customization and elaboration

Dankar, I., Haddarah, A., Omar, F. E. L., Sepulcre, F., & Cunill, M. P. (2018) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2018.03.018 · Cited by 477 · see citing works

Hyaluronic acid: A review on its biology, aspects of drug delivery, route of administrations and a special emphasis on its approved marketed products and recent clinical studies

Vasvani, S., Kulkarni, P., & Rawtani, D. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.11.066 · Cited by 477 · see citing works

Production, recovery and applications of xanthan gum by Xanthomonas campestris

Palaniraj, A., & Jayaraman, V. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.03.035 · Cited by 466 · see citing works

Developments and new applications of UV-induced surface graft polymerizations

DENG, J., Wang, L., Liu, L., & Yang, W. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.06.002 · Cited by 465 · see citing works

Ultrastretchable and Self-Healing Double-Network Hydrogel for 3D Printing and Strain Sensor

Liu, S., & Li, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07445 · Cited by 456 · see citing works

The application of hyaluronic acid in bone regeneration

Zhai, P., Peng, X., Li, B., Liu, Y., Sun, H., & Li, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.10.169 · Cited by 438 · see citing works

Crosslinking in polysaccharide and protein films and coatings for food contact – A review

de Azeredo, H. M. C., & Waldron, K. W. (2016) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2016.04.008 · Cited by 428 · see citing works

Current advances and future perspectives of 3D printing natural-derived biopolymers

Liu, J., Sun, L., Xu, W., Wang, Q., Yu, S., & Sun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.077 · Cited by 428 · see citing works

Extrusion 3D Printing of Polymeric Materials with Advanced Properties

Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 417 · see citing works

Extrusion-based food printing for digitalized food design and nutrition control

Sun, J., Zhou, W., Yan, L., Huang, D., & Lin, L.-Y. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.02.028 · Cited by 410 · see citing works

A Review on 3D Printing for Customized Food Fabrication

Sun, J., Peng, Z., Zhou, W., Fuh, J. Y. H., Hong, G. S., & Chiu, A. (2015) · Procedia Manufacturing · doi:10.1016/j.promfg.2015.09.057 · Cited by 407 · see citing works

Effect of ultrasound treatment on particle size and molecular weight of whey proteins

­Jambrak, A. ­., Mason, T. J., Lelas, V., Paniwnyk, L., & Herceg, Z. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.08.012 · Cited by 402 · see citing works

Photoresponsive biomaterials for targeted drug delivery and 4D cell culture

Ruskowitz, E. R., & DeForest, C. A. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.87 · Cited by 399 · see citing works

Application of 3D printing for customized food. A case on the development of a fruit-based snack for children

Derossi, A., Caporizzi, R., Azzollini, D., & Severini, C. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.05.015 · Cited by 399 · see citing works

Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting

Giuseppe, M. D., Law, N., Webb, B., Macrae, R. A., Liew, L. J., Sercombe, T. B., Dilley, R. J., & Doyle, B. J. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.12.018 · Cited by 395 · see citing works

Alginate Sulfate–Nanocellulose Bioinks for Cartilage Bioprinting Applications

Müller, M., Öztürk, E., Arlov, Ø., Gatenholm, P., & Zenobi‐Wong, M. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1704-5 · Cited by 392 · see citing works

Alginate-based nanomaterials: Fabrication techniques, properties, and applications

Fernando, I. P. S., Lee, W., Han, E. J., & Ahn, G. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123823 · Cited by 391 · see citing works

Development and application of hyaluronic acid in tumor targeting drug delivery

Luo, Z., Dai, Y., & Gao, H. (2019) · Acta Pharmaceutica Sinica B · doi:10.1016/j.apsb.2019.06.004 · Cited by 390 · see citing works

Synthesis and biomedical applications of aerogels: Possibilities and challenges

Maleki, H. H., Durães, L. M. R., García‐González, C. A., Gaudio, P. D., Portugal, A., & Mahmoudi, M. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2016.05.011 · Cited by 387 · see citing works

Bio-inks for 3D bioprinting: recent advances and future prospects

Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 383 · see citing works

Casein and pectin: Structures, interactions, and applications

Wusigale, Liang, L., & Luo, Y. (2020) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2020.01.027 · Cited by 382 · see citing works

A bioprintable form of chitosan hydrogel for bone tissue engineering

Demirtaş, T. T., Irmak, G., & Gümüşderelı́oğlu, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7b1d · Cited by 380 · see citing works

Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting

Wilson, S. A., Cross, L., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 370 · see citing works

Scaffold‐free inkjet printing of three‐dimensional zigzag cellular tubes

Xu, C., Chai, W., Huang, Y. H., & Markwald, R. R. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24591 · Cited by 358 · see citing works

Chitosan hydrogels in 3D printing for biomedical applications

Rajabi, M., McConnell, M. A., Cabral, J. D., & Ali, M. A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117768 · Cited by 353 · see citing works

Freeform inkjet printing of cellular structures with bifurcations

Christensen, K., Xu, C., Chai, W., Zhang, Z., Fu, J., & Huang, Y. H. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25501 · Cited by 352 · see citing works

Silk biomaterials in wound healing and skin regeneration therapeutics: From bench to bedside

Chouhan, D., & Mandal, B. B. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.11.050 · Cited by 350 · see citing works

3D-Printable Bioactivated Nanocellulose–Alginate Hydrogels

Leppiniemi, J., Lahtinen, P., Paajanen, A., Mahlberg, R., Metsä-Kortelainen, S., Pinomaa, T., Pajari, H., Vikholm‐Lundin, I., Pursula, P., & Hytönen, V. P. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02756 · Cited by 350 · see citing works

3D printing using plant-derived cellulose and its derivatives: A review

Dai, L., Cheng, T., Duan, C., Zhao, W., Zhang, W., Zou, X., Aspler, J. S., & Ni, Y. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.027 · Cited by 344 · see citing works

Generation of Multi-scale Vascular Network System Within 3D Hydrogel Using 3D Bio-printing Technology

Lee, V. K., Lanzi, A. M., Ngo, H., Yoo, S., Vincent, P. A., & Dai, G. (2014) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-014-0340-0 · Cited by 343 · see citing works

Association of denatured whey proteins with casein micelles in heated reconstituted skim milk and its effect on casein micelle size

Anema, S. G., & Li, Y. (2003) · Journal of Dairy Research · doi:10.1017/s0022029902005903 · Cited by 340 · see citing works

An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing

Kirchmajer, D. M., Gorkin, R. A., III, & Panhuis, M. I. H. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00393h · Cited by 336 · see citing works

Oral dosage forms fabricated by Three Dimensional Printing™

Katstra, W. E., Palazzolo, R. D., Rowe, C., Giritlioglu, B., Teung, P., & Cima, M. J. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00225-4 · Cited by 335 · see citing works

Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing

Herzberger, J., Sirrine, J. M., Williams, C. B., & Long, T. E. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101144 · Cited by 330 · see citing works

A 3D printed chitosan-pectin hydrogel wound dressing for lidocaine hydrochloride delivery

Long, J., Etxabide, A., Nand, A. V., Bunt, C. R., Ray, S., & Seyfoddin, A. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109873 · Cited by 328 · see citing works

Wound dressings from naturally-occurring polymers: A review on homopolysaccharide-based composites

Naseri‐Nosar, M., & Ziora, Z. M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.02.003 · Cited by 325 · see citing works

Gelatin-Based Hydrogels for Organ 3D Bioprinting

Wang, X., Ao, Q., Tian, X., Fan, J., Tong, H., Hou, W., & Bai, S. (2017) · Polymers · doi:10.3390/polym9090401 · Cited by 317 · see citing works

The influence of printing parameters on cell survival rate and printability in microextrusion-based 3D cell printing technology

Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312 · see citing works

Enzymatically crosslinked silk-hyaluronic acid hydrogels

Raia, N. R., Partlow, B. P., McGill, M., Kimmerling, E. P., Ghezzi, C. E., & Kaplan, D. L. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.046 · Cited by 312 · see citing works

Enzymatically crosslinked silk and silk-gelatin hydrogels with tunable gelation kinetics, mechanical properties and bioactivity for cell culture and encapsulation

Hasturk, O., Jordan, K. E., Choi, J., & Kaplan, D. L. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.119720 · Cited by 310 · see citing works

Effect of rheological properties of potato, rice and corn starches on their hot-extrusion 3D printing behaviors

Chen, H., Xie, F., Chen, L., & Zheng, B. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2018.09.011 · Cited by 302 · see citing works

Rheology to understand and optimize processibility, structures and properties of starch polymeric materials

Xie, F., Halley, P. J., & Avérous, L. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.002 · Cited by 301 · see citing works

Review of Cellulose Non-Derivatizing Solvent Interactions with Emphasis on Activity in Inorganic Molten Salt Hydrates

Sen, S., Martin, J. D., & Argyropoulos, D. S. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400085a · Cited by 298 · see citing works

3D printing for electroanalysis: From multiuse electrochemical cells to sensors

Cardoso, R. M., Mendonça, D. M. H., Silva, W. P., Silva, M. N. T., Nossol, E., da Silva, R. A. B., Richter, E. M., & Muñoz, R. A. A. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.06.021 · Cited by 297 · see citing works

Recent advances of collagen-based biomaterials: Multi-hierarchical structure, modification and biomedical applications

Liu, X., Zheng, C., Luo, X., Wang, X., & Jiang, H. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.02.070 · Cited by 296 · see citing works

3D-Bioprinting of Polylactic Acid (PLA) Nanofiber–Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells

Narayanan, L. K., Huebner, P., Fisher, M. B., Spang, J. T., Starly, B., & Shirwaiker, R. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00196 · Cited by 293 · see citing works

On printability, quality and nutritional properties of 3D printed cereal based snacks enriched with edible insects

Severini, C., Azzollini, D., Albenzio, M., & Derossi, A. (2018) · Food Research International · doi:10.1016/j.foodres.2018.01.034 · Cited by 293 · see citing works

Pectin polymers as wall materials for the nano-encapsulation of bioactive compounds

Rehman, A., Ahmad, T. Z., Aadil, R. M., Spotti, M. J., Bakry, A. M., Khan, I. M., Zhao, L., Riaz, T., & Tong, Q. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.05.015 · Cited by 288 · see citing works

3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel

Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 287 · see citing works

The effect of plasticizers on the functional properties of biodegradable gelatin-based film: A review

Suderman, N., Isa, M. I. N., & Sarbon, N. M. (2018) · Food Bioscience · doi:10.1016/j.fbio.2018.06.006 · Cited by 286 · see citing works

In situ formed collagen-hyaluronic acid hydrogel as biomimetic dressing for promoting spontaneous wound healing

Ying, H., Zhou, J., Wang, M., Su, D., Ma, Q., Lv, G., & Chen, J. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.03.093 · Cited by 285 · see citing works

3D bioprinting of human chondrocyte-laden nanocellulose hydrogels for patient-specific auricular cartilage regeneration

Ávila, H. M., Schwarz, S., Rotter, N., & Gatenholm, P. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.003 · Cited by 283 · see citing works

The effect of dehydrothermal treatment on the mechanical and structural properties of collagen‐GAG scaffolds

Haugh, M. G., Jaasma, M. J., & O’Brien, F. J. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31955 · Cited by 282 · see citing works

Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting

Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 281 · see citing works

Natural Polysaccharides in Drug Delivery and Biomedical Applications

Castro, P. M., Sarmento, B. F. C. C., Madureira, A. R., & Pintado, M. E. (2019) · Elsevier eBooks · doi:10.1016/c2018-0-01566-2 · Cited by 280 · see citing works

3D Printing of Photocurable Cellulose Nanocrystal Composite for Fabrication of Complex Architectures via Stereolithography

Palaganas, N. B., Mangadlao, J. D., de Leon, A. C. C., Palaganas, J. O., Pangilinan, K. D., Lee, Y. J., & Advíncula, R. C. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09223 · Cited by 279 · see citing works

3D-Printed Mechanochromic Materials

Peterson, G. I., Larsen, M. B., Ganter, M. A., Storti, D., & Boydston, A. J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am506745m · Cited by 275 · see citing works

Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures

Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 272 · see citing works

Visible Light Photoinitiation of Cell-Adhesive Gelatin Methacryloyl Hydrogels for Stereolithography 3D Bioprinting

Wang, Z., Kumar, H., Tian, Z., Jin, X., Holzman, J. F., Ménard, F., & Kim, K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06607 · Cited by 271 · see citing works

The potential of microalgae and their biopolymers as structuring ingredients in food: A review

Bernaerts, T. M. M., Gheysen, L., Foubert, I., Hendrickx, M. E., & Van Loey, A. M. (2019) · Biotechnology Advances · doi:10.1016/j.biotechadv.2019.107419 · Cited by 271 · see citing works

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels

Gao, Q., Liu, Z., Lin, Z., Qiu, J., Liu, Y., Liu, A., Wang, Y., Xiang, M., Chen, B., Fu, J., et al. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00643 · Cited by 269 · see citing works

On Low-Concentration Inks Formulated by Nanocellulose Assisted with Gelatin Methacrylate (GelMA) for 3D Printing toward Wound Healing Application

Xu, W., Molino, B. Z., Cheng, F., Molino, P. J., Yue, Z., Su, D., Wang, X., Willför, S. M., Xu, C., & Wallace, G. G. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b21268 · Cited by 264 · see citing works

3D printing of meat

Dick, A., Bhandari, B., & Prakash, S. (2019) · Meat Science · doi:10.1016/j.meatsci.2019.03.005 · Cited by 264 · see citing works

Natural and genetically engineered proteins for tissue engineering

Gomes, S. C. V., Leonor, I. B., Mano, J. F., Reis, R. L., & Kaplan, D. L. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.07.003 · Cited by 260 · see citing works

Inkjet and inkjet-based 3D printing: connecting fluid properties and printing performance

Guo, Y., Patanwala, H. S., Bognet, B., & Ma, A. W. K. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0076 · Cited by 260 · see citing works

Advanced Polymer Designs for Direct‐Ink‐Write 3D Printing

Li, L., Lin, Q., Tang, M., Duncan, A. J. E., & Ke, C. (2019) · Chemistry - A European Journal · doi:10.1002/chem.201900975 · Cited by 259 · see citing works

Extrusion-based 3D printing of food pastes: Correlating rheological properties with printing behaviour

Zhu, S., Stieger, M., van der Goot, A. J., & Schutyser, M. A. I. (2019) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2019.102214 · Cited by 255 · see citing works

Cellulose Solvents – Remarkable History, Bright Future

Liebert, T. (2010) · ACS Symposium Series · doi:10.1021/bk-2010-1033.ch001 · Cited by 250 · see citing works

Three-Dimensional Printing of Wood-Derived Biopolymers: A Review Focused on Biomedical Applications

Xu, W., Wang, X., Sandler, N., Willför, S. M., & Xu, C. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03924 · Cited by 249 · see citing works

Preparation of low-molecular-weight, collagen hydrolysates (peptides): Current progress, challenges, and future perspectives

Hong, H., Fan, H., Chalamaiah, M., & Wu, J. (2019) · Food Chemistry · doi:10.1016/j.foodchem.2019.125222 · Cited by 249 · see citing works

Aerogels from crosslinked cellulose nano/micro-fibrils and their fast shape recovery property in water

Zhang, W., Zhang, Y., Lu, C., & Deng, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30688c · Cited by 248 · see citing works

3D Bioprinting Using Cross-Linker-Free Silk–Gelatin Bioink for Cartilage Tissue Engineering

Singh, Y. P., Bandyopadhyay, A., & Mandal, B. B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11644 · Cited by 246 · see citing works

3D Bioprinting of Self‐Standing Silk‐Based Bioink

Zheng, Z., Wu, J., Liu, M., Wang, H., Li, C., Rodrí­guez, M. J., Li, G., Wang, X., & Kaplan, D. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701026 · Cited by 243 · see citing works

Creation of internal structure of mashed potato construct by 3D printing and its textural properties

Liu, Z., Bhandari, B., Prakash, S., & Zhang, M. (2018) · Food Research International · doi:10.1016/j.foodres.2018.05.075 · Cited by 242 · see citing works

3D-printed chitosan-based scaffolds: An in vitro study of human skin cell growth and an in-vivo wound healing evaluation in experimental diabetes in rats

Intini, C., Elviri, L., Cabral, J. D., Mros, S., Bergonzi, C., Bianchera, A., Flammini, L., Govoni, P., Barocelli, E., Bettini, R., et al. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.07.057 · Cited by 240 · see citing works

3D-printed bioactive and biodegradable hydrogel scaffolds of alginate/gelatin/cellulose nanocrystals for tissue engineering

Dutta, S. D., Hexiu, J., Patel, D. K., Ganguly, K., & Lim, K. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.12.011 · Cited by 239 · see citing works

Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing

Murphy, C. A., & Collins, M. N. (2016) · Polymer Composites · doi:10.1002/pc.24069 · Cited by 238 · see citing works

Environment friendly green composites based on soy protein isolate – A review

Koshy, R. R., Mary, S. K., Thomas, S., & Pothan, L. A. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.04.023 · Cited by 236 · see citing works

Development and characterization of carrageenan/grapefruit seed extract composite films for active packaging

Kanmani, P., & Rhim, J.-W. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.05.011 · Cited by 232 · see citing works

Preparation of high thermal stability gelatin emulsion and its application in 3D printing

Du, J., Dai, H., Wang, H., Yu, Y. M., Zhu, H., Fu, Y., Ma, L., Peng, L., Li, L., Wang, Q., et al. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.106536 · Cited by 227 · see citing works

Optimization of collagen type I-hyaluronan hybrid bioink for 3D bioprinted liver microenvironments

Mazzocchi, A. R., Devarasetty, M., Huntwork, R. C., Söker, S., & Skardal, A. (2018) · Biofabrication · doi:10.1088/1758-5090/aae543 · Cited by 227 · see citing works

Rheological and mechanical behavior of milk protein composite gel for extrusion-based 3D food printing

Liu, Y., Yu, Y., Liu, C., Regenstein, J. M., Liu, X., & Zhou, P. (2018) · LWT · doi:10.1016/j.lwt.2018.12.053 · Cited by 226 · see citing works

Fluorine-Free Oil Absorbents Made from Cellulose Nanofibril Aerogels

Mulyadi, A., Zhang, Z., & Deng, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10985 · Cited by 225 · see citing works

Physical properties of 3D printed baking dough as affected by different compositions

Yang, F., Zhang, M., Prakash, S., & Liu, Y. (2018) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2018.01.001 · Cited by 224 · see citing works

Silk based bioinks for soft tissue reconstruction using 3-dimensional (3D) printing with in vitro and in vivo assessments

Rodrí­guez, M. J., Brown, J. E., Giordano, J. E. M., Lin, S. J., Omenetto, F. G., & Kaplan, D. L. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.11.046 · Cited by 221 · see citing works

4D printing: Recent advances and proposals in the food sector

Teng, X., Zhang, M., & MUJUMDAR, A. S. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.01.076 · Cited by 220 · see citing works

Rheology and buildability of sustainable cement-based composites containing micro-crystalline cellulose for 3D-printing

Long, W.-J., Tao, J.-L., Lin, C., Gu, Y.-C., Liu, M., Duan, H., & Xing, F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118054 · Cited by 220 · see citing works

Physically Crosslinked Biocompatible Silk‐Fibroin‐Based Hydrogels with High Mechanical Performance

Luo, K., Yang, Y., & Shao, Z. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503450 · Cited by 219 · see citing works

Current Strategies for the Manufacture of Small Size Tissue Engineering Vascular Grafts

Carrabba, M., & Madeddu, P. R. (2018) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2018.00041 · Cited by 219 · see citing works

Strategies for effective oral insulin delivery with modified chitosan nanoparticles: A review

Mukhopadhyay, P., Mishra, R., Rana, D. K., & Kundu, P. P. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.004 · Cited by 216 · see citing works

Flow behavior prior to crosslinking: The need for precursor rheology for placement of hydrogels in medical applications and for 3D bioprinting

Townsend, J. M., Beck, E. C., Gehrke, S. H., Berkland, C. J., & Detamore, M. S. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.01.003 · Cited by 215 · see citing works

Mechanical Properties, Cytocompatibility and Manufacturability of Chitosan:PEGDA Hybrid-Gel Scaffolds by Stereolithography

Morris, V. B., Nimbalkar, S., Younesi, M., McClellan, P. E., & Akkuş, O. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1643-1 · Cited by 209 · see citing works

Dual extrusion 3D printing of mashed potatoes/strawberry juice gel

Liu, Z., Zhang, M., & Yang, C.-H. (2018) · LWT · doi:10.1016/j.lwt.2018.06.014 · Cited by 204 · see citing works

The summary of the most important cell-biomaterial interactions that need to be considered during in vitro biocompatibility testing of bone scaffolds for tissue engineering applications

Przekora, A. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.01.061 · Cited by 202 · see citing works

An overview of gelatin derived from aquatic animals: Properties and modification

Lin, L., Regenstein, J. M., Lv, S., Lu, J., & Jiang, S. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.012 · Cited by 202 · see citing works

Reconsidering conventional and innovative methods for pectin extraction from fruit and vegetable waste: Targeting rhamnogalacturonan I

Mao, G., Wu, D., Wei, C., Tao, W., Ye, X., Linhardt, R. J., Orfila, C., & Chen, S. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.11.001 · Cited by 201 · see citing works

4D printing of mashed potato/purple sweet potato puree with spontaneous color change

He, C., Zhang, M., & Guo, C. (2019) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2019.102250 · Cited by 201 · see citing works

GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis

Stratesteffen, H., Köpf, M., Kreimendahl, F., Blaeser, A., Jockenhoevel, S., & Fischer, H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa857c · Cited by 197 · see citing works

3D printing of egg yolk and white with rice flour blends

Anukiruthika, T., Moses, J. A., & Anandharamakrishnan, C. (2019) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2019.109691 · Cited by 197 · see citing works

Bioinspired 3D Printable, Self-Healable, and Stretchable Hydrogels with Multiple Conductivities for Skin-like Wearable Strain Sensors

Wei, J., Xie, J., Zhang, P., Zou, Z., Ping, H., Wang, W., Xie, H., Shen, J. Z., Lei, L., & Fu, Z. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c19512 · Cited by 196 · see citing works

Pectin based food-ink formulations for 3-D printing of customizable porous food simulants

Vancauwenberghe, V., Katalagarianakis, L., Wang, Z., Meerts, M., Hertog, M., Verboven, P., Moldenaers, P., Hendrickx, M., Lammertyn, J., & Nicolaï, B. M. (2017) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2017.06.011 · Cited by 194 · see citing works

3D Printable Strain Sensors from Deep Eutectic Solvents and Cellulose Nanocrystals

Lai, C.-W., & Yu, S. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c11152 · Cited by 194 · see citing works

Investigation on 3D printing ability of soybean protein isolate gels and correlations with their rheological and textural properties via LF-NMR spectroscopic characteristics

Phuhongsung, P., Zhang, M., & Devahastin, S. (2020) · LWT · doi:10.1016/j.lwt.2020.109019 · Cited by 193 · see citing works

Rheology as a tool for evaluation of melt processability of innovative dosage forms

Aho, J., Boetker, J. P., Baldursdóttir, S., & Rantanen, J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.009 · Cited by 190 · see citing works

Current Status in the Utilization of Biobased Polymers for 3D Printing Process: A Systematic Review of the Materials, Processes, and Challenges

Shahbazi, M., & Jäger, H. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01379 · Cited by 190 · see citing works

Interpenetrating polymer network hydrogels composed of chitosan and photocrosslinkable gelatin with enhanced mechanical properties for tissue engineering

Suo, H., Zhang, D., Yin, J., Qian, J. W., Wu, Z. L., & Fu, J. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.07.016 · Cited by 190 · see citing works

Tablet fragmentation without a disintegrant: A novel design approach for accelerating disintegration and drug release from 3D printed cellulosic tablets

Arafat, B. T., Wojsz, M., Isreb, A., Forbes, R. T., Isreb, M., Ahmed, W., Arafat, T., & Alhnan, M. A. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.03.019 · Cited by 187 · see citing works

3D printing of gelatin methacrylate-based nerve guidance conduits with multiple channels

Ye, W., Li, H., Yu, K., Xie, C., Wang, P., Zheng, Y., Zhang, P., Xiu, J., Yang, Y., Zhang, F., et al. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108757 · Cited by 183 · see citing works

Patient‐Specific Bioinks for 3D Bioprinting of Tissue Engineering Scaffolds

Faramarzi, N., Yazdi, I. K., Nabavinia, M., Gemma, A., Fanelli, A., Caizzone, A., Ptaszek, L. M., Sinha, I., Khademhosseini, A., Ruskin, J. N., et al. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701347 · Cited by 182 · see citing works

3D printed milk protein food simulant: Improving the printing performance of milk protein concentration by incorporating whey protein isolate

Liu, Y., Liu, D., Wei, G., Ma, Y., Bhandari, B., & Zhou, P. (2018) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2018.07.018 · Cited by 181 · see citing works

Engineering a multifunctional 3D-printed PLA-collagen-minocycline-nanoHydroxyapatite scaffold with combined antimicrobial and osteogenic effects for bone regeneration

Martin, V., Ribeiro, I. A., Alves, M. M., Gonçalves, L., Claudio, R. A., Grenho, L., Fernandes, M. H., Gomes, P., Santos, C. F., & Bettencourt, A. F. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.03.056 · Cited by 181 · see citing works

Recent advances in functional 3D printing of foods: a review of functions of ingredients and internal structures

Zhao, L., Zhang, M., Chitrakar, B., & Adhikari, B. (2020) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2020.1799327 · Cited by 180 · see citing works

Strategy to Achieve Highly Porous/Biocompatible Macroscale Cell Blocks, Using a Collagen/Genipin-bioink and an Optimal 3D Printing Process

Kim, Y. B., Lee, H., & Kim, G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11669 · Cited by 179 · see citing works

Wood-based nanocellulose and bioactive glass modified gelatin–alginate bioinks for 3D bioprinting of bone cells

Ojansivu, M., Rashad, A., Ahlinder, A., Massera, J., Mishra, A., Syverud, K., Finne‐Wistrand, A., Miettinen, S., & Mustafa, K. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0692 · Cited by 178 · see citing works

Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting

Kim, M. H., Lee, Y. W., Jung, W., Oh, J., & Nam, S. Y. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.06.014 · Cited by 177 · see citing works

Genetic Engineering of Polysaccharide Structure: Production of Variants of Xanthan Gum in Xanthomonas campestris

Hassler, R. A., & Doherty, D. H. (1990) · Biotechnology Progress · doi:10.1021/bp00003a003 · Cited by 176 · see citing works

Development of Satureja cuneifolia-loaded sodium alginate/polyethylene glycol scaffolds produced by 3D-printing technology as a diabetic wound dressing material

Ilhan, E., Cesur, S., Güler, E., Topal, F., Albayrak, D., Güncü, M. M., Çam, M. E., Taşkın, T., Şaşmazel, H. T., Aksu, B., et al. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.086 · Cited by 176 · see citing works

A Gelatin-sulfonated Silk Composite Scaffold based on 3D Printing Technology Enhances Skin Regeneration by Stimulating Epidermal Growth and Dermal Neovascularization

Xiong, S., Zhang, X., Lü, P., Wu, Y., Wang, Q., Sun, H., Heng, B. C., Bunpetch, V., Zhang, S., & Ouyang, H. (2017) · Scientific Reports · doi:10.1038/s41598-017-04149-y · Cited by 173 · see citing works

Optimization of cell-laden bioinks for 3D bioprinting and efficient infection with influenza A virus

Berg, J., Hiller, T., Kissner, M. S., Qazi, T. H., Duda, G. N., Hocke, A. C., Hippenstiel, S., Elomaa, L., Weinhart, M., Fahrenson, C., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-31880-x · Cited by 172 · see citing works

Bacterial cellulose nanofibers promote stress and fidelity of 3D-printed silk based hydrogel scaffold with hierarchical pores

Huang, L. Q., Du, X., Fan, S., Yang, G., Shao, H., Li, D., Cao, C., Zhu, Y., Zhu, M., & Zhang, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.080 · Cited by 171 · see citing works

Encapsulation of food bioactives and nutraceuticals by various chitosan-based nanocarriers

Akbari-Alavijeh, S., Shaddel, R., & Jafari, S. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.105774 · Cited by 170 · see citing works

Functional 3D printing: Approaches and bioapplications

Palmara, G., Frascella, F., Roppolo, I., Chiappone, A., & Chiadò, A. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112849 · Cited by 169 · see citing works

The Tissue-Engineered Auricle: Past, Present, and Future

Bichara, D. A., O'Sullivan, N.-A., Pomerantseva, I., Zhao, X., Sundback, C. A., Vacanti, J. P., & Randolph, M. A. (2011) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2011.0326 · Cited by 169 · see citing works

Three-dimensional electrospun silk-fibroin nanofiber for skin tissue engineering

Park, Y. R., Ju, H. W., Lee, J. M., Kim, D., Lee, O. J., Moon, B. M., Park, H. J., Jeong, J. Y., Yeon, Y. K., & Park, C. H. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.07.047 · Cited by 169 · see citing works

3D printed chitosan scaffolds: A new TiO2 support for the photocatalytic degradation of amoxicillin in water

Bergamonti, L., Bergonzi, C., Graiff, C., Lottici, P. P., Bettini, R., & Elviri, L. (2019) · Water Research · doi:10.1016/j.watres.2019.07.008 · Cited by 165 · see citing works

Designing hydrocolloid based food-ink formulations for extrusion 3D printing

Gholamipour‐Shirazi, A., Norton, I. T., & Mills, T. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.04.011 · Cited by 163 · see citing works

3D electrospun silk fibroin nanofibers for fabrication of artificial skin

Sheikh, F. A., Ju, H. W., Lee, J. M., Moon, B. M., Park, H. J., Lee, O. J., Kim, J.-H., Kim, D., & Park, C. H. (2014) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2014.11.007 · Cited by 161 · see citing works

Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures

Jin, Y., Compaan, A. M., Bhattacharjee, T., & Huang, Y. H. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025016 · Cited by 161 · see citing works

Structure and function of hybrid carrageenans

van de Velde, F. (2007) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2007.05.013 · Cited by 160 · see citing works

Solidification of 3D Printed Nanofibril Hydrogels into Functional 3D Cellulose Structures

Håkansson, K. M. O., Henriksson, I., Vázquez, C. D. L. P., Kuzmenko, V., Markstedt, K., Enoksson, P., & Gatenholm, P. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600096 · Cited by 160 · see citing works

Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure—An Approach towards 3D Printing of Aerogels

Maleki, H. H., Montes, S., Hayati-Roodbari, N., Putz, F., & Hüsing, N. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05856 · Cited by 159 · see citing works

Factors affecting 3D printing and post-processing capacity of cookie dough

Pulatsu, E., Su, J., Lin, J., & Lin, M. (2020) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2020.102316 · Cited by 159 · see citing works

Cellulose based materials for controlled release formulations of agrochemicals: A review of modifications and applications

Pang, L., Gao, Z., Feng, H., Wang, S., & Wang, Q. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.11.004 · Cited by 158 · see citing works

Freeform drop-on-demand laser printing of 3D alginate and cellular constructs

Xiong, R., Zhang, Z., Chai, W., Huang, Y. H., & Chrisey, D. B. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045011 · Cited by 158 · see citing works

Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications.

Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395 · see citing works

Additive manufacturing of sustainable biomaterials for biomedical applications

Arif, Z. U., Khalid, M. Y., Noroozi, R., Hossain, M., Shi, H., Tariq, A., Ramakrishna, S., & Umer, R. (2023) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2023.100812 · Cited by 227 · see citing works

Rheology of edible food inks from 2D/3D/4D printing, and its role in future 5D/6D printing

Cheng, Y., Fu, Y., Ma, L., Yap, P. L., Losic, D., Wang, H., & Zhang, Y.-H. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107855 · Cited by 188 · see citing works

Material jetting for advanced applications: A state-of-the-art review, gaps and future directions

Elkaseer, A., Chen, K. J., Janhsen, J. C., Refle, O., Hagenmeyer, V., & Scholz, S. G. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103270 · Cited by 198 · see citing works

Starch modification for non-food, industrial applications: Market intelligence and critical review

Adewale, P., Yancheshmeh, M. S., & Lam, E. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119590 · Cited by 197 · see citing works

Recent advances in 3D printing of tough hydrogels: A review

Zhang, X. N., Zheng, Q., & Wu, Z. L. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.109895 · Cited by 185 · see citing works

Current Status and Future Perspectives of Supports and Protocols for Enzyme Immobilization

Cavalcante, F. T. T., Cavalcante, A. L. G., de Sousa, I. G., Neto, F. S., & dos Santos, J. C. S. (2021) · Catalysts · doi:10.3390/catal11101222 · Cited by 158 · see citing works

Selected Biopolymers’ Processing and Their Applications: A Review

Flórez, M., Cazón, P., & Vázquez, M. (2023) · Polymers · doi:10.3390/polym15030641 · Cited by 150 · see citing works

Smart 3D Printed Hydrogel Skin Wound Bandages: A Review

Tsegay, F., Elsherif, M., & Butt, H. (2022) · Polymers · doi:10.3390/polym14051012 · Cited by 142 · see citing works

Recent Advances in Polymer-based 3D Printing for Wastewater Treatment Application: An Overview

Yusoff, N. H. M., Teo, L.-R. I., Phang, S. J., Wong, V.-L., Cheah, K. H., & Lim, S. S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132311 · Cited by 123 · see citing works

A 3D Food Printing Process for the New Normal Era: A Review

Lee, J. (2021) · Processes · doi:10.3390/pr9091495 · Cited by 112 · see citing works

3D and 4D Bioprinting Technologies: A Game Changer for the Biomedical Sector?

Noroozi, R., Arif, Z. U., Taghvaei, H., Khalid, M. Y., Sahbafar, H., Hadi, A., Sadeghianmaryan, A., & Chen, D. (2023) · Annals of Biomedical Engineering · doi:10.1007/s10439-023-03243-9 · Cited by 108 · see citing works

4D Printing: Technological and Manufacturing Renaissance

Khalid, M. Y., Arif, Z. U., & Ahmed, W. (2022) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200003 · Cited by 103 · see citing works

Dual encapsulation of β-carotene by β-cyclodextrin and chitosan for 3D printing application

Wang, H., Hu, L., Peng, L., Du, J., Lan, M., Cheng, Y., Ma, L., & Zhang, Y. (2022) · Food Chemistry · doi:10.1016/j.foodchem.2022.132088 · Cited by 88 · see citing works

Natural polymer starch-based materials for flexible electronic sensor development: A review of recent progress

Xie, F. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122116 · Cited by 77 · see citing works

Biodegradable Polymers—a Review on Properties, Processing, and Degradation Mechanism

Cakmak, O. K. (2023) · Circular Economy and Sustainability · doi:10.1007/s43615-023-00277-y · Cited by 76 · see citing works

Personalized nutrition with 3D-printed foods: a systematic review on the impact of different additives

Abedini, A., Sohrabvandi, S., Sadighara, P., Hosseini, H., Farhoodi, M., Assadpour, E., Alizadeh Sani, M., Zhang, F., Seyyedi-Mansour, S., & Jafari, S. M. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103181 · Cited by 71 · see citing works

Alginate/Gelatin‐Based Hydrogel with Soy Protein/Peptide Powder for 3D Printing Tissue‐Engineering Scaffolds to Promote Angiogenesis

Liu, Y., Hu, Q., Dong, W., Liu, S., Zhang, H., & Gu, Y. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202100413 · Cited by 70 · see citing works

Structural, rheological, and gelling characteristics of starch-based materials in context to 3D food printing applications in precision nutrition.

Wu, H., Sang, S.-Y., Weng, P.-F., Pan, D., Wu, Z.-F., Yang, J.-S., Liu, L.-Y., Farag, M. A., Xiao, J.-Q., & Liu, L.-L. (2023) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.13217 · Cited by 53 · see citing works

Three-Dimensional Printing of Cellulose/Covalent Organic Frameworks (CelloCOFs) for CO 2 Adsorption and Water Treatment

Abdelhamid, H. N., Sultan, S., & Mathew, A. P. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c13966 · Cited by 63 · see citing works

Innovative Polymer Composites with Natural Fillers Produced by Additive Manufacturing (3D Printing)—A Literature Review

Anwajler, B., Zdybel, E., & Tomaszewska‐Ciosk, E. (2023) · Polymers · doi:10.3390/polym15173534 · Cited by 62 · see citing works

An Overview of Natural Polymers as Reinforcing Agents for 3D Printing

Sabbatini, B., Cambriani, A., Cespi, M., Palmieri, G. F., Perinelli, D. R., & Bonacucina, G. (2021) · ChemEngineering · doi:10.3390/chemengineering5040078 · Cited by 63 · see citing works

Recent Advances in the Carotenoids Added to Food Packaging Films: A Review

Roy, S., Deshmukh, R. K., Tripathi, S., Gaikwad, K. K., Das, S. S., & Sharma, D. (2023) · Foods · doi:10.3390/foods12214011 · Cited by 61 · see citing works

Smart biomaterials: From 3D printing to 4D bioprinting

Amukarimi, S., Rezvani, Z., Eghtesadi, N., & Mozafari, M. (2022) · Methods · doi:10.1016/j.ymeth.2022.07.006 · Cited by 59 · see citing works

3D printing of cellulose/leaf-like zeolitic imidazolate frameworks (CelloZIF-L) for adsorption of carbon dioxide (CO 2 ) and heavy metal ions

Abdelhamid, H. N., Sultan, S., & Mathew, A. P. (2023) · Dalton Transactions · doi:10.1039/d2dt04168e · Cited by 58 · see citing works

Application of polysaccharide-based biopolymers as supports in photocatalytic treatment of water and wastewater: a review

Sohouli, E., Irannejad, N., Ziarati, A., Ehrlich, H., Rahimi‐Nasrabadi, M., Ahmadi, F., & Luque, R. (2022) · Environmental Chemistry Letters · doi:10.1007/s10311-022-01456-3 · Cited by 50 · see citing works

Polysaccharide‐based biomaterials in a journey from 3D to 4D printing

Shokrani, H., Shokrani, A., Seidi, F., Mashayekhi, M., Kar, S., Nedeljković, D., Kuang, T., Saeb, M. R., & Mozafari, M. (2023) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10503 · Cited by 49 · see citing works

Biopolymer-Based Multilayer Films and Coatings for Food Preservation: an Update of the Recent Development

Xie, F. (2023) · Current Food Science and Technology Reports · doi:10.1007/s43555-023-00002-8 · Cited by 48 · see citing works

Alginate-based nanocomposites for food preservation: Recent progress showcasing heightened material properties and functionalities

Xie, F. (2024) · Advanced Nanocomposites · doi:10.1016/j.adna.2024.07.002 · Cited by 48 · see citing works

A fluid-supported 3D hydrogel bioprinting method

Beh, C. W., Yew, D. S., Chai, R. J., Chin, S. Y., Seow, Y., & Hoon, S. S. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121034 · Cited by 46 · see citing works

Microinterfaces in biopolymer-based bicontinuous hydrogels guide rapid 3D cell migration

Xu, K. L., Caprio, N. D., Fallahi, H., Dehghany, M., Davidson, M. D., Laforest, L. G., Cheung, B. C. H., Zhang, Y., Wu, M., Shenoy, V. B., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-46774-y · Cited by 44 · see citing works

Towards the development of foods 3D printer: Trends and technologies for foods printing

Neamah, H. A., & Tandio, J. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e33882 · Cited by 43 · see citing works

Advancing 3D Printing through Integration of Machine Learning with Algae‐Based Biopolymers

Sofian, A. D. A. B. A., Lim, H. R., Chew, K. W., & Show, P.-L. (2024) · ChemBioEng Reviews · doi:10.1002/cben.202300054 · Cited by 43 · see citing works

3D-Printed Hydrogels from Natural Polymers for Biomedical Applications: Conventional Fabrication Methods, Current Developments, Advantages, and Challenges

Uysal, B., Madduma‐Bandarage, U. S. K., Jayasinghe, H. G., & Madihally, S. V. (2025) · Gels · doi:10.3390/gels11030192 · Cited by 40 · see citing works

Progress on 3D‐Printed Metal‐Organic Frameworks with Hierarchical Structures

Lieu, W. Y., Fang, D., Tay, K. J., Li, X. L., Chu, W. C., Ang, Y. S., Li, D., Ang, L. K., Wang, Y., & Yang, H. Y. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202200023 · Cited by 37 · see citing works

Augmenting corn starch gel printability for architectural 3D modeling for customized food

Xian, D., Wu, L., Lin, K., Liu, P., Wu, S., Yuan, Y., & Xie, F. (2024) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2024.110294 · Cited by 34 · see citing works

Recent advances in the medical applications of two-dimensional MXene nanosheets

Paramasivam, G., Prasad, Y. S., Atchudan, R., Arya, S. K., & Sundramoorthy, A. K. (2024) · Nanomedicine · doi:10.1080/17435889.2024.2422806 · Cited by 34 · see citing works

Femtosecond laser polishing of additively manufactured parts at grazing incidence

Li, N., Fan, P., Zhu, Q., Cui, B., Silvain, J., & Lu, Y. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.155833 · Cited by 32 · see citing works

Current significance and future perspective of 3D-printed bio-based polymers for applications in energy conversion and storage system

Putri, K. N. A., Intasanta, V., & Hoven, V. P. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e25873 · Cited by 31 · see citing works

Evaluation of physicochemical properties of starch-protein gels: Printability and postprocessing

Carvajal-Mena, N., Tabilo‐Munizaga, G., Pérez‐Won, M., Herrera‐Lavados, C., Lemus-Mondaca, R. A., & Moreno‐Osorio, L. (2023) · LWT · doi:10.1016/j.lwt.2023.114797 · Cited by 31 · see citing works

Numerical investigation on the viscoelastic polymer flow in material extrusion additive manufacturing

Zhang, H., Ye, F., Chen, F., Yuan, W., & Yan, W. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.103992 · Cited by 30 · see citing works

3D Printing of Hydrogel Polysaccharides for Biomedical Applications: A Review

Aghajani, M., Garshasbi, H. R., Naghib, S. M., & Mozafari, M. R. (2025) · Biomedicines · doi:10.3390/biomedicines13030731 · Cited by 34 · see citing works

Transforming Additive Manufacturing with Artificial Intelligence: A Review of Current and Future Trends

Pancholi, S., Gupta, M. K., Bartoszuk, M., Vashishtha, G., Ross, N. S., Korkmaz, M. E., Królczyk, G., & Petrů, J. (2025) · Archives of Computational Methods in Engineering · doi:10.1007/s11831-025-10283-y · Cited by 29 · see citing works

Polymerizable Choline- and Imidazolium-Based Ionic Liquids Reinforced with Bacterial Cellulose for 3D-Printing

Smirnov, M. A., Fedotova, V. S., Sokolova, M. P., Nikolaeva, A. L., Elokhovskiy, V., & Karttunen, M. (2021) · Polymers · doi:10.3390/polym13183044 · Cited by 29 · see citing works

Evaluation of the bio-based materials utilization in shape memory polymer composites production

Uyan, M., & Çeliktaş, M. S. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112196 · Cited by 28 · see citing works

3D Printing of Conducting Polymer Hydrogels for Electrostimulation‐Assisted Tissue Engineering

Tran, C. M., Yue, Z., Qin, C., Imani, K. B. C., Dottori, M., Forster, R. J., & Wallace, G. G. (2025) · Advanced Materials · doi:10.1002/adma.202507779 · Cited by 27 · see citing works

Recent Advances in Cellulose-Based Hydrogels Prepared by Ionic Liquid-Based Processes

Taokaew, S. (2023) · Gels · doi:10.3390/gels9070546 · Cited by 26 · see citing works

Recent Progress and Trends in the Development of Electrospun and 3D Printed Polymeric-Based Materials to Overcome Antimicrobial Resistance (AMR)

Caracciolo, P. C., Abraham, G. A., Battaglia, E. S., & Abel, S. B. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15071964 · Cited by 26 · see citing works

Artificial Intelligence and Multiscale Modeling for Sustainable Biopolymers and Bioinspired Materials

Wang, X. Q., Jin, Z., Ravichandran, D., & Gu, G. X. (2025) · Advanced Materials · doi:10.1002/adma.202416901 · Cited by 24 · see citing works

3D printing of biomaterials for biomedical applications: a review

Bhatti, S. S., & Singh, J. (2023) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-023-01525-z · Cited by 24 · see citing works

Using waste biomass to produce 3D-printed artificial biodegradable structures for coastal ecosystem restoration

Talekar, S., Barrow, C. J., Nguyen, H. C., Zolfagharian, A., Zare, S., Farjana, S. H., Macreadie, P. I., Ashraf, M., & Trevathan‐Tackett, S. M. (2024) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2024.171728 · Cited by 23 · see citing works

3D printing of PBAT-based composites filled with agro-wastes via selective laser sintering

Colucci, G., Lupone, F., Bondioli, F., & Messori, M. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113197 · Cited by 24 · see citing works

A Review of Carrageenan as a Polymer Electrolyte in Energy Resource Applications

Zakaria, Z., Kamarudin, S., Osman, S. H., Mohamad, A. A., & Razali, H. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02903-0 · Cited by 21 · see citing works

Applications of physical and chemical treatments in plant-based gels for food 3D printing.

Liu, Z.-H., Hu, X.-N., Lu, S.-Y., Xu, B., Bai, C.-Y., Ma, T., & Song, Y. (2024) · Journal of Food Science · doi:10.1111/1750-3841.17101 · Cited by 20 · see citing works

A self-expandable C-shaped 3D printing tracheal stent for combinatorial controlled paclitaxel release and tracheal support

Chen, Z., Jin, Z., Yang, L., Liu, Y., Liu, J., Cai, S., Shen, Y., & Guo, S. (2022) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100760 · Cited by 17 · see citing works

3-Dimentional printing of polysaccharides for water-treatment: A review

Zhang, H., Xue, Y., Jiang, C., Liu, D., Zhang, L., Lang, G., Mao, T., Effrem, D. B., Iimaa, T., Surenjav, U., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131117 · Cited by 16 · see citing works

Organic nanomaterials applied to the manufacturing of personalized future 3D-printed foods: A review

Guo, Q. Q., Zhang, M., MUJUMDAR, A. S., & Li, C. (2024) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2024.104835 · Cited by 15 · see citing works

Collagen as a diversely structural biomaterial: From assembly strategies to potential applications in food industry

Wang, Y., Chen, Y., Li, Y., Zuo, D., Huang, X., Tian, X., Li, Y., & Wang, W. (2024) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2024.110694 · Cited by 14 · see citing works

Review of the Green Composite: Importance of Biopolymers, Uses and Challenges

Zorah, M., Mudhafar, M., Majhool, A. A., Abbood, S. F., Alsailawi, H. A., Karhib, M. M., & Mustapa, I. R. (2023) · Journal of Advanced Research in Fluid Mechanics and Thermal Sciences · doi:10.37934/arfmts.111.1.194216 · Cited by 15 · see citing works

Smart, sustainable and controllable bio-based shape memory polymer composite fabrication

Uyan, M., & Çeliktaş, M. S. (2023) · Cellulose · doi:10.1007/s10570-023-05247-z · Cited by 12 · see citing works

3D printed biopolymer/black phosphorus nanoscaffolds for bone implants: A review

Wu, N., Li, J., Li, X., Wang, R., Zhang, L., Liu, Z., & Jiao, T. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.135227 · Cited by 12 · see citing works

Development of printable bacterial nanocellulose bioinks for bioprinting applications

Grunberg, N., Mcmeeking, A., Dieckmann, E., & Cheeseman, C. R. (2024) · Biotechnology for Sustainable Materials · doi:10.1186/s44316-024-00015-w · Cited by 11 · see citing works

Agricultural residues to high-value nanomaterials: Pathways to sustainability

Sanoja‐López, K. A., Cedeño-Muñoz, J. S., Rivadeneira-Mendoza, B. F., Vergara-Romero, A., Luque, R., & Rodríguez-Díaz, J. M. (2025) · Resources Conservation & Recycling Advances · doi:10.1016/j.rcradv.2025.200243 · Cited by 11 · see citing works

High-Performance UV-Vis Light Induces Radical Photopolymerization Using Novel 2-Aminobenzothiazole-Based Photosensitizers

Balcerak, A., Kabatc, J., Czech, Z., Nowak, M., & Mozelewska, K. (2021) · Materials · doi:10.3390/ma14247814 · Cited by 11 · see citing works

Three-Dimensional Printing of Hydrogel Blend Tissue Engineering Scaffolds with In Situ Delivery of Anticancer Drug for Treating Melanoma Resection-Induced Tissue Defects

Chen, X.-D., Zhang, X., Zhu, H., Lu, H. H., & Wang, M. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15120381 · Cited by 10 · see citing works

Utilizing ultrafast lasers for postprocessing to improve mechanical properties of 3D-printed parts

Yadav, D. P., & Mingareev, I. (2023) · Journal of Laser Applications · doi:10.2351/7.0000804 · Cited by 10 · see citing works

Additive manufacturing of biopolymers

Mehrpouya, M., & Vahabi, H. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00002-8 · Cited by 10 · see citing works

Photopolymer self-growing technology: Towards multifunctional lab-on-fiber

Zhang, Y., Yu, J., Liu, Y., Liu, P., Tang, X., Zhang, Y. X., Liu, Z., & Yuan, L. (2023) · Optics & Laser Technology · doi:10.1016/j.optlastec.2023.109815 · Cited by 10 · see citing works

Advances in 3D printing of food and nutritional products.

Diañez, I., Martínez, I., Franco, J., Brito-de-la-Fuente, E., & Gallegos, C. (2022) · Advances in Food and Nutrition Research · doi:10.1016/bs.afnr.2021.12.003 · Cited by 9 · see citing works

Advancements and Challenges in 3D Printing for Wound Healing: Current Trends and Future Prospects

Gandhimathi, R., Chandrudu, J., Sripriya, D. T., Pavani, C., Jyothi, V. A., Sabarees, G., & Solomon, V. R. (2025) · Regenerative Engineering and Translational Medicine · doi:10.1007/s40883-025-00470-5 · Cited by 9 · see citing works

3D printing of nanoparticle-containing scaffolds for cancer phototherapy, magnetic hyperthermia therapy, and tissue regeneration

Fernandes, P. D., Silva, F. C., Magalhães, F. D., Pereira, R. F., Santos, S. G., & Pinto, A. M. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.11.043 · Cited by 9 · see citing works

3D printed pectin-chitosan polyelectrolyte hydrogels for controlled gastrointestinal release and colon-targeted delivery

Hwang, S., Yang, K., Yoon, H. S., & Roh, Y. H. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124802 · Cited by 9 · see citing works

Natural polysaccharide-based hydrogel bioprinting for articular cartilage repair

Wu, X., Cheng, X., Kang, M., Dong, R., Zhao, J., & Qu, Y. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1204318 · Cited by 9 · see citing works

Effect of carbon nanotube (CNT)-reinforced polymers and biopolymer matrix on interface damage of nanocomposite materials

Belkheir, M., Rouissat, M., Mokaddem, A., & Boutaous, A. (2023) · Emergent Materials · doi:10.1007/s42247-023-00547-3 · Cited by 9 · see citing works

3D printing application in biomedical - a review

Pramanik, J., Brahma, B., Pradhan, S., Senapati, M. R., Samal, A. K., & Pani, S. K. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.07.046 · Cited by 9 · see citing works

Valorization of Grain and Oil By-Products with Special Focus on Hemicellulose Modification

Liu, X., Xie, J., Jacquet, N., & Blecker, C. S. (2024) · Polymers · doi:10.3390/polym16121750 · Cited by 8 · see citing works

Biopolymer-based 4D printing: Achieving heightened printability and shape morphing with composites of alginate and calcium ion-infused 2D vermiculite

Ramasamy, M. S., Kaliannagounder, V. K., Novakovic, K., Tang, F., Kar‐Narayan, S., & Xie, F. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.145652 · Cited by 8 · see citing works

Recent Advances in Biopolymer Modifications for the Generation of 3D Printable Hydrogels

Chu, Y., Zhu, P., & Chen, L. (2025) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.5c09488 · Cited by 9 · see citing works

Sustainable Biodegradable Biocomposites Reinforced With Natural Fibers: A Review on Processing, Properties, and Degradation

Ramírez, A. O., González‐Morones, P., Flores‐Silva, P. C., Sifuentes‐Nieves, I., Hernández, Z. G., Mendoza‐Tolentino, Y., Gámez, J. F. H., & Hernández‐Hernández, E. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70536 · Cited by 8 · see citing works

Biodegradable polymers for sustainable packaging: Fabrication methods

Chakraborty, S., Sarkar, U., Bera, D., Ghosh, C. K., & Roy, L. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-96020-5.00156-4 · Cited by 8 · see citing works

Biological gum-based biopolymers as advanced materials for 3D printing applications: A review

Badieh, M. M. S., Topuz, F., Demirkesen, İ., Nowacka, M., Jakubczyk, E., Mounir, S., Dehnad, D., & Falsafi, S. R. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114212 · Cited by 7 · see citing works

Type‐Independent 3D Writing and Nano‐Patterning of Confined Biopolymers

Yang, U., Kang, B., Yong, M., Yang, D., Choi, S., Je, J. H., & Oh, S. S. (2023) · Advanced Science · doi:10.1002/advs.202207403 · Cited by 7 · see citing works

3D printing of biopolymer-based hydrogels

Xie, F. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00004-1 · Cited by 7 · see citing works

Flexible keratin hydrogels obtained by a reductive method

Ramos, M. L. P., Rivas, P. C., Ascolani, H., Cavallo, M., Bonino, F., de Luis, R. F., Guerbi, M. X., Michelini, F., Bernal, C., Martínez, J. M. L., et al. (2024) · Materials Chemistry Frontiers · doi:10.1039/d4qm00449c · Cited by 6 · see citing works

Organic Ink Multi‐Material 3D Printing of Sustainable Soft Systems

Heiden, A., Schardax, M., Hüttenberger, M., Preninger, D., Mao, G., Schiller, D., & Kaltenbrunner, M. (2024) · Advanced Materials · doi:10.1002/adma.202409403 · Cited by 6 · see citing works

Challenges and Issues in Biopolymer Applications

Hedar, M., Intisar, A., Hussain, T., Hussain, N., & Bilal, M. (2023) · Springer eBooks · doi:10.1007/978-981-19-0710-4_55 · Cited by 6 · see citing works

Preparation and characterization of poly(lactic acid)/linear low density polyethylene/recycled tire waste/graphene nanocomposites

Bijarimi, M., Abdulsalam, Y., Norazmi, M., Normaya, E., Alhadadi, W., & Desa, M. S. Z. M. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.03.568 · Cited by 6 · see citing works

Innovative Zein-derived inks: Towards sustainable 3D printing solutions

Cozorici, D., Blanzeanu, E., Radu, I., Verziu, M. N., Stavarache, C. E., Marin, M., Luque, R., & Zaharia, C. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.104017 · Cited by 5 · see citing works

Modeling the Energy and Heating Efficiency of 3D Printing for Composite Materials with Dispersed Volumetric Particles

Grakov, T., Mateev, V. M., & Marinova, I. (2025) · Electronics · doi:10.3390/electronics14040688 · Cited by 5 · see citing works

3D Printing of Bioplastics for Medical Applications

Patel, P. K., Sonagara, C., Kumar, S., Meena, K., & Banerjee, S. S. (2025) · Polymer Engineering and Science · doi:10.1002/pen.27266 · Cited by 5 · see citing works

Tailoring 3D printed cellulose acetate properties produced via direct ink writing: Densification through over‐extrusion and evaporation rate control

Slejko, E. A., Gorella, N. S., Gasparini, R., Scuor, N., & Seriani, S. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26484 · Cited by 5 · see citing works

Additive-Free Gelatine-Based Devices for Chondral Tissue Regeneration: Shaping Process Comparison among Mould Casting and Three-Dimensional Printing

Montanari, M., Sangiorgi, A., Campodoni, E., Bassi, G., Gardini, D., Montesi, M., Panseri, S., Sanson, A., Tampieri, A., & Sandri, M. (2022) · Polymers · doi:10.3390/polym14051036 · Cited by 5 · see citing works

3D printing of cellulose-based biopolymers: Materials, processing strategies, and biomedical applications

Patel, D. K., Cha, J., Won, S.-Y., & Han, S. S. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.149077 · Cited by 4 · see citing works

Engineered Biopolymer Architectures for Selective Metal Ions Extraction

Nobahar, A., Passos, H., Schaeffer, N., Sosa, F. H. B., & Coutinho, J. A. P. (2026) · Advanced Sustainable Systems · doi:10.1002/adsu.70457 · Cited by 4 · see citing works

Optical Sensors Based on Polymeric Materials

Shinde, S. J., Waikar, M. R., Sonker, R. K., & Sonkawade, R. G. (2023) · Progress in optical science and photonics · doi:10.1007/978-981-99-6014-9_10 · Cited by 4 · see citing works

The swelling properties of single component (gelatin) and electrostatically assembled (gelatin–gum tragacanth) edible composite films exposed to water and salt solution

Pulatsu, E., Auleear, A. R., Abioye, R. O., & Udenigwe, C. C. (2024) · Physics of Fluids · doi:10.1063/5.0233603 · Cited by 4 · see citing works

Understanding cell-extracellular matrix interactions for topology-guided tissue regeneration

Randhawa, A., Dutta, S. D., Ganguly, K., Patil, T. V., Luthfikasari, R., & Lim, K. (2023) · Biocell · doi:10.32604/biocell.2023.026217 · Cited by 4 · see citing works

Biopolymers in additive manufacturing

de Morais, A. C. L., Voet, V. S. D., Folkersma, R., & Loos, K. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00001-6 · Cited by 4 · see citing works

Evaluation of the Effectiveness of Chitosan-Modified Bone Regeneration Materials: A Systematic Review

Gerova-Vatsova, T., Peev, S., Yotsova, R. V., & Rogova, V.-V. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17050665 · Cited by 4 · see citing works

3D printing with biopolymers

Garmulewicz, A., Tourlomousis, F., Smith, C. M., & Bolumburu, P. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95151-7.00008-9 · Cited by 4 · see citing works

Current Status in the Utilization of Biobased Polymers for 3D Printing Process: A Systematic Review of the Materials, Processes, and Challenges

Shahbazi, M., & Jäger, H. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01379 · Cited by 190 · see citing works

3D printing of functionalized biopolymers: design, processes, and applications

Gupta, S., & Sharma, S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-27350-6.00018-3

A review on the recent applications of synthetic biopolymers in 3D printing for biomedical applications

Shiva, S. M., G, A. P. R., Bajaj, G., John, A. E., Sharan Chandran, M., Kumar, V. V., & Ramakrishna, S. (2023) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-023-06765-9 · Cited by 107 · see citing works

3D-Printed Biopolymers for Tissue Engineering Application

Li, X., Cui, R., Sun, L., Aifantis, K. E., Fan, Y., Feng, Q., Cui, F., & Watari, F. (2014) · International Journal of Polymer Science · doi:10.1155/2014/829145 · Cited by 185 · see citing works

Bio-based Polymers: a Review on Processing and 3D Printing

Begum, S. A., Krishnan, P. S. G., & Kanny, K. M. (2023) · Polymer Science Series A · doi:10.1134/s0965545x2360045x · Cited by 17 · see citing works