The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Facile fabrication of hydroxyapatite-magnetite-bentonite composite for efficient adsorption of Pb(II), Cd(II), and crystal violet from aqueous solution
Abstract
This study reports a facile fabrication route for hydroxyapatite (HAp) nanoparticles impregnated magnetic bentonite (HAp@Fe3O4@bentonite) composite, which was in turn applied for the removal of Pb(II), Cd(II) and crystal violet (CV) dye from aqueous solution. Adsorption isotherm data best fitted with Freundlich isotherm model and kinetic behavior adopted pseudo-second order adsorption mechanism attaining equilibrium in 60 min over a wide pH range (2.0–13). HAp@Fe3O4@bentonite was magnetically separable and realized higher adsorption capacity for Pb(II) (404.56 mg/g), Cd(II) (310.36 mg/g) and CV (1201.30 mg/g) than those of acid-treated bentonite (161.28, 155.7 and 740.14 mg/g, respectively). Similarly, the higher Langmuir maximum adsorption capacity exhibited by HAp@Fe3O4@bentonite for Pb(II), Cd(II) and CV (482, 309 and 1290 mg/g respectively) was attributed to –OH, NH2, PO43− surface functionalities. Fresh and spent adsorbents were characterized by Fourier transform infra-red (FTIR) spectroscopy, X-ray diffraction (XRD), differential thermogravimetry, Brunauer–Emmett–Teller (BET) surface area analysis, scanning electron microscopy, energy dispersive X-ray analysis, X-ray photoelectron spectroscopy and vibrating-sample magnetometry techniques. HAp@Fe3O4@bentonite composite exhibited BET surface area of 73.72 m2/g, pore volume of 0.026 cm³/g and an average particle size of 81.39 nm. The composite remained active for five successive adsorption reuses with minimal loss in adsorption capacity as confirmed by FTIR and XRD analyses. The newly synthesized HAp@Fe3O4@bentonite composite possessing high adsorption efficiency for Pb(II), Cd(II) and CV can be envisaged as a promising solution for wastewater treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Burakov, A. E., Galunin, E. V., Burakova, I. V., Kucherova, A. E., Agarwal, S., Tkachev, A. G., & Gupta, V. K. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2017.11.034 · Cited by 1,612
Heavy metal adsorption onto agro-based waste materials: a review
Demirbas, A. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.01.024 · Cited by 1,566
Heavy Metal Pollution: Source, Impact, and Remedies
Mohammed, A. S., Kapri, A., & Goel, R. (2011) · Environmental Pollution · doi:10.1007/978-94-007-1914-9_1 · Cited by 355
Cited by
Foroutan, R., Peighambardoust, S. J., Peighambardoust, S. H., Pateiro, M., & Lorenzo, J. M. (2021) · Molecules · doi:10.3390/molecules26082241 · Cited by 353
Wu, J., Sun, X., Wu, J., & Yu, X. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.129352 · Cited by 36
Metadata
- Authors
- Ain, Q. U., Zhang, H., Yaseen, M., Rasheed, U., Liu, K., Subhan, S., & Tong, Z.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 247
- Pages
- 119088
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2983390512
- Cited by
- 209
- References
- 3
- FWCI
- 8.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Facile fabrication of hydroxyapatite-magnetite-bentonite composite for efficient adsorption of Pb(II), Cd(II), and crystal violet from aqueous solution. https://app.cochat.ai/papers/10.1016/j.jclepro.2019.119088
- The paper
- Ain, Q. U., Zhang, H., Yaseen, M., Rasheed, U., Liu, K., Subhan, S., & Tong, Z. (2020). Facile fabrication of hydroxyapatite-magnetite-bentonite composite for efficient adsorption of Pb(II), Cd(II), and crystal violet from aqueous solution. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.119088
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.