The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Life cycle greenhouse gas emissions of concrete containing supplementary cementitious materials: cut-off vs. substitution
Abstract
Abstract Existing life cycle assessments of concrete containing supplementary cementitious materials (SCMs) hinge on methodological procedures that might skew the results towards the conclusion that increasing the use of SCMs in concrete always decreases greenhouse gas (GHG) emissions. These procedures relate to the treatment of co-products and selection of functional units. Co-production is typically addressed via cut-off procedures and by-products are always considered to be unconstrained resources, while functional units often do not account for exposure conditions and concrete properties such as strength and workability. To address this limitation, the aim of this study was to investigate the GHG benefits of using SCMs by (1) adopting different approaches to solve multifunctionality (cut-off vs. substitution) and (2) including strength, workability and exposure conditions of concrete in the functional unit. Ontario (Canada) was used as case study, and both SCMs currently used there (i.e., slag, silica fume and metakaolin) and a wide range of alternative cementitious materials used around the world (i.e., fly ash, oil shale ash, calcium carbide residue, volcanic ash, coal bottom ash and rice husk ash) were investigated. The new contribution of this study reveals that different conclusions can be drawn when different methodological procedures are adopted. If the market for SCM is constrained (i.e., by-products are already fully utilized) and the unconstrained alternative on the market is Portland cement, the benefits of using SCM are greatly reduced, or even reversed, if the substitution approach is adopted. In contrast, unconstrained SCMs result in considerable GHG savings unless they significantly reduce the water-to-binder ratio to reach a prescribed strength and require long distance transport.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The ecoinvent database version 3 (part I): overview and methodology
Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1087-8 · Cited by 5,564
Scrivener, K. L., John, V. M., & Gartner, E. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.03.015 · Cited by 3,620
Assessing, Understanding and Unlocking Supplementary Cementitious Materials
Snellings, R. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.12 · Cited by 348
Recent update on the environmental impact of geopolymers
Habert, G., & Ouellet-Plamondon, C. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.6 · Cited by 330
Field evaluation of soft highway subgrade soil stabilized with calcium carbide residue
Du, Y.-J., Jiang, N.-J., Liu, S.-Y., Horpibulsuk, S., & Arulrajah, A. (2016) · Soils and Foundations · doi:10.1016/j.sandf.2016.02.012 · Cited by 173
Cited by
Barbhuiya, S., Kanavaris, F., Das, B. B., & Idrees, M. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.108861 · Cited by 378
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Building materials in a circular economy: The case of wood waste as CO2-sink in bio concrete
Caldas, L. R., Saraiva, A. B., Lucena, A. F. P., Da Gloria, M. Y., Santos, A. S., & Filho, R. D. T. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105346 · Cited by 110
Life cycle assessment of alkali-activated materials: a systematic literature review
Nikravan, M., Firdous, R., & Stephan, D. (2023) · Low-carbon Materials and Green Construction · doi:10.1007/s44242-023-00014-6 · Cited by 93
Qiu, C., Tian, S., Fang, N., & Hao, D. (2026) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2025-0263
Metadata
- Authors
- Arrigoni, A., Panesar, D. K., Duhamel, M., Opher, T., Saxe, S., Posen, I. D., & MacLean, H. L.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 263
- Pages
- 121465
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3014279432
- Cited by
- 181
- References
- 5
- FWCI
- 11.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.