Environmental and economic perspective of waste-derived activators on alkali-activated mortars
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Alkali-activated binders have been considered a low carbon alternative to cement and are produced by reacting aluminosilicate precursor with an alkali-activator. However, alkali-activators have been observed to be a major contributor to the environmental burdens of alkali-activated materials regarding various environmental impact categories. Therefore, this study aims to perform an environmental impact assessment using life cycle assessment methodology on alkali-activated mortars produced from chemically modified one- and two-part waste-derived activators (waste glass and rice husk ash) in comparison to conventional one- and two-part alkali-activated mortars, to estimate the influence of activator on environmental impact of mortar. Additionally, a simplified cost analysis of the different mortar compositions was conducted. A sensitivity analysis was performed on the key parameters, and allocating emissions to waste glass and rice husk ash. Results show that waste glass and rice husk ash-derived alkali-activated mortar resulted in up to 62%, 61%, 76% and 56% reduced emission respectively in climate change, fossil depletion, terrestrial acidification and photochemical ozone creation formation when compared to conventional alkali-activated mortar counterpart. Sensitivity analysis indicated that waste glass and rice husk ash are not so sensitive to mass allocation, with a maximum of 5% increased emissions observed in the above-mentioned impact categories. Additionally, sensitivity analysis on sodium hydroxide demonstrated that production from chlorine-alkali electrolysis using technology-mix produced improved environmental performance in comparison to production from brine solution and diaphragm route, respectively. Sensitivity analysis on sodium silicate using an alternative inventory data indicated the emissions can increase regarding one-part or decrease regarding two-part alkali-activated mortars. Results from cost analysis indicated up to 19% cost savings from waste-derived alkali-activated mortar compared to conventional alkali-activated mortar. In conclusion, chemically modified waste-derived activators are a promising alternative in improving environmental performance of alkali-activated materials if their usage also reduces or substitutes the need for conventional alkali-activators.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Global CO 2 emissions from cement production
Andrew, R. M. (2018) · Earth System Science Data · doi:10.5194/essd-10-195-2018 · Cited by 1,583
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Cited by
Ghadir, P., Zamanian, M., Mahbubi-Motlagh, N., Saberian, M., Li, J., & Ranjbar, N. (2021) · Transportation Geotechnics · doi:10.1016/j.trgeo.2021.100639 · Cited by 140
Life cycle assessment of alkali-activated materials: a systematic literature review
Nikravan, M., Firdous, R., & Stephan, D. (2023) · Low-carbon Materials and Green Construction · doi:10.1007/s44242-023-00014-6 · Cited by 93
Ansari, M. A., Shariq, M., & Mahdi, F. (2023) · Structures · doi:10.1016/j.istruc.2023.06.089 · Cited by 73
Metadata
- Authors
- Abdulkareem, M., Havukainen, J., Nuortila-Jokinen, J., & Horttanainen, M.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 280
- Pages
- 124651
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3093473252
- Cited by
- 159
- References
- 4
- FWCI
- 12.96
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.