The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Decarbonisation and hydrogen integration of steel industries: Recent development, challenges and technoeconomic analysis
Open accessAbstract
The steel industry is one of the major sources of greenhouse gas emissions with significant energy demand. Currently, 73% of the world's steel is manufactured through the coal-coke-based blast furnace-basic oxygen furnace route (BF-BOF), emitting about two tonnes of CO2 per tonne of steel produced. This review reports the major technologies, recent developments, challenges and technoeconomic comparison of steelmaking technologies, emphasising the integration of hydrogen in emerging and established ironmaking and steelmaking processes. Significant trials are underway, especially in Germany, to replace coal injected in the tuyeres of the blast furnace with hydrogen. However, it is not clear that this approach can be extended beyond 30% replacement of coke because of the associated technical challenges. Direct smelting and fluidised bed technologies can emit 20%–30% less CO2 without carbon capture and storage utilisation. The implications of hydrogen energy in these technologies as a substitute for natural gas and coal are yet to be fully explored. A hydrogen-based direct reduction of iron ore (DRI) and steel scrap melting in an electric arc furnace (EAF) appeared to be the most mature technological routes to date, capable of reducing CO2 emission by 95% but rely on the availability of rich iron concentrates as feed materials. Shaft furnace technologies are the common DRI-making process, with a share of over 72% of the total production. The technology has been developed with natural gas as the main fuel and reductant. However, it is now being adapted to operate predominantly on hydrogen to produce a low-carbon DRI product. Plasma and electrolysis-based iron and steelmaking are some of the other potential technologies for the application of hydrogen with a CO2 reduction potential of over 95%. However, these technologies are in the preliminary stage of development with a technology readiness level of below 6. There are many technological challenges for the application of hydrogen in steel manufacturing, such as challenges in distributing heat due to the endothermic H2 reduction process, balancing carbon content in the product steel (particularly using zero-carbon DRI), removal of gangue materials and sourcing of cost-competitive renewable hydrogen and high-quality iron ore (65>Fe). As iron ore quality degrades worldwide, several companies are considering melting DRI before steelmaking, possibly using submerged arc technology to eliminate gangue materials. Hence, significant laboratory and pilot-scale demonstrations are required to test process parameters and product qualities. Our analysis anticipates that hydrogen will play an instrumental role in decarbonising steel industries by 2035.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Use of U.S. Croplands for Biofuels Increases Greenhouse Gases Through Emissions from Land-Use Change
Searchinger, T., Heimlich, R., Houghton, R. A., Dong, F., Elobeid, A., Fabiosa, J., Tokgoz, S., Hayes, D., & Yu, T.-H. (2008) · Science · doi:10.1126/science.1151861 · Cited by 4,888
The production and application of hydrogen in steel industry
Liu, W., Zuo, H., Wang, J., Xue, Q., Ren, B., & Yang, F. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.12.123 · Cited by 499
Decarbonization of the Iron and Steel Industry with Direct Reduction of Iron Ore with Green Hydrogen
Bhaskar, A., Assadi, M., & Nikpey Somehsaraei, H. (2020) · Energies · doi:10.3390/en13030758 · Cited by 414
Hasanbeigi, A., Arens, M., & Price, L. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.02.031 · Cited by 342
A General Vision for Reduction of Energy Consumption and CO2 Emissions from the Steel Industry
Holappa, L. (2020) · Metals · doi:10.3390/met10091117 · Cited by 336
Biomass and carbon dioxide capture and storage: A review
Kemper, J. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.06.012 · Cited by 323
Techno-economic evaluation of innovative steel production technologies
Fischedick, M., Marzinkowski, J., Winzer, P., & Weigel, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.063 · Cited by 304
Otto, A., Robinius, M., Grube, T., Schiebahn, S., Praktiknjo, A., & Stolten, D. (2017) · Energies · doi:10.3390/en10040451 · Cited by 266
A new anode material for oxygen evolution in molten oxide electrolysis
Allanore, A., Yin, L., & Sadoway, D. R. (2013) · Nature · doi:10.1038/nature12134 · Cited by 264
Karmaker, A. K., Rahman, M. M., Hossain, M. A., & Ahmed, M. R. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118645 · Cited by 264
Prospective scenarios on energy efficiency and CO2 emissions in the European Iron & Steel industry
Pardo, N., & Moya, J. A. (2013) · Energy · doi:10.1016/j.energy.2013.03.015 · Cited by 262
Pei, M., Petäjäniemi, M., Regnell, A., & Wijk, O. (2020) · Metals · doi:10.3390/met10070972 · Cited by 239
Extensive review of the opportunities to use biomass-based fuels in iron and steelmaking processes
Suopajärvi, H., Kemppainen, A., Haapakangas, J., & Fabritius, T. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.029 · Cited by 230
Suopajärvi, H., Umeki, K., Mousa, E., Hedayati, A., Romar, H., Kemppainen, A., Wang, C., Phounglamcheik, A., Tuomikoski, S., Norberg, N., et al. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.01.060 · Cited by 228
Review of hydrogen-rich ironmaking technology in blast furnace
Chen, Y., & Zuo, H. (2021) · Ironmaking & Steelmaking · doi:10.1080/03019233.2021.1909992 · Cited by 180
Reduction kinetics of iron oxide pellets with H2 and CO mixtures
Zuo, H.-B., Wang, C., Dong, J.-J., Jiao, K.-X., & Xu, R.-S. (2015) · International Journal of Minerals, Metallurgy, and Materials · doi:10.1007/s12613-015-1123-x · Cited by 175
Bhaskar, A., Abhishek, R., Assadi, M., & Somehesaraei, H. N. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.131339 · Cited by 174
Wang, C., Mellin, P., Lövgren, J., Nilsson, L., Yang, W., Salman, H., Hultgren, A., & Larsson, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.04.013 · Cited by 173
Renewables‐based decarbonization and relocation of iron and steel making: A case study
Gielen, D., Saygin, D., Taibi, E., & Birat, J. (2020) · Journal of Industrial Ecology · doi:10.1111/jiec.12997 · Cited by 169
FUTURE TECHNOLOGIES FOR ENERGY-EFFICIENT IRON AND STEEL MAKING
de Beer, J., Worrell, E., & Blok, K. (1998) · Annual Review of Energy and the Environment · doi:10.1146/annurev.energy.23.1.123 · Cited by 169
Features and Challenges of Molten Oxide Electrolytes for Metal Extraction
Allanore, A. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0451501jes · Cited by 139
Aghaie, M., Mehrpooya, M., & Pourfayaz, F. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.07.001 · Cited by 134
Possibilities for CO2 emission reduction using biomass in European integrated steel plants
Mandova, H., Leduc, S., Wang, C., Wetterlund, E., Patrizio, P., Gale, W., & Kraxner, F. (2018) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2018.04.021 · Cited by 113
The Science of Victorian Brown Coal
(1991) · Elsevier eBooks · doi:10.1016/c2013-0-04527-6 · Cited by 112
Macroeconomic implications of switching to process-emission-free iron and steel production in Europe
Mayer, J., Bachner, G., & Steininger, K. W. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.118 · Cited by 104
Charcoal injection in blast furnaces (Bio-PCI): CO2 reduction potential and economic prospects
Feliciano-Bruzual, C. (2014) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2014.06.001 · Cited by 102
ULCOS: ultra-low CO 2 steelmaking
Meijer, K., Denys, M. B., Lasar, J., et al. (2009) · Ironmaking & Steelmaking Processes Products and Applications · doi:10.1179/174328109x439298 · Cited by 100
Integration of water electrolysis for fossil-free steel production
Krüger, A. J., Andersson, J., Grönkvist, S., & Cornell, A. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.08.116 · Cited by 85
Gan, Y., & Griffin, W. M. (2018) · Resources Policy · doi:10.1016/j.resourpol.2018.03.015 · Cited by 80
Reduction of magnetite to metallic iron in strong alkaline medium
Monteiro, J. F., Ivanova, Y. A., Kovalevsky, A. V., Ivanou, D. K., & Frade, J. R. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.02.058 · Cited by 57
Mandova, H., Gale, W. F., Williams, A., Heyes, A. L., Hodgson, P., & Miah, K. (2018) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2018.03.001 · Cited by 55
Comparison of CO2 emission between COREX and blast furnace iron-making system
Hu, C., Han, X., Li, Z., et al. (2009) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(09)60052-8 · Cited by 40
Khasraw, D., Spooner, S., Hage, H., Meijer, K., & Li, Z. (2020) · Fuel · doi:10.1016/j.fuel.2020.119101 · Cited by 38
Production of Ti–Fe alloys via molten oxide electrolysis at a liquid iron cathode
Jiao, H., Tian, D., Tu, J., & Jiao, S. (2018) · RSC Advances · doi:10.1039/c8ra01646a · Cited by 27
The Kinetics of Isothermal Hydrogen Reduction of Nanocrystalline Fe2O3 Powder
Lee, G., Choi, J., Song, J.-I., et al. (2014) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.m2014182 · Cited by 26
Biomass energy with carbon capture and storage (BECCS): a review.
Gough, C., & Upham, P. (2010) · Cited by 23
Thermal performance and reduction kinetic analysis of cold-bonded pellets with CO and H2 mixtures
Wang, R.-R., Zhang, J., Liu, Y., Zheng, A., Liu, Z., Liu, X.-L., & Li, Z.-G. (2018) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-018-1623-6 · Cited by 14
Graupner, Y., Weckenborg, C., & Spengler, T. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.02.118 · Cited by 12
Eletroreduction of Fe2O3 to Fe in Strongly Alkaline Solution
Gu, S. L., Zou, X., & Lu, X. G. (2014) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.595.8 · Cited by 7
Cited by
Carbon neutrality and hydrogen energy systems
Evro, S., Oni, B. A., & Tomomewo, O. S. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.06.407 · Cited by 466
Metadata
- Authors
- Shahabuddin, M., Brooks, G., & Rhamdhani, M. A.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2023-04
- Volume
- 395
- Pages
- 136391
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W4320484042
- Cited by
- 298
- References
- 39
- FWCI
- 29.31
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.