The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Experiments on stainless steel hollow sections—Part 1: Material and cross-sectional behaviour
Open accessAbstract
Abstract Basic material properties and cross-sectional data (stress–strain curves and load–end shortening curves) are presented for square, rectangular and circular hollow section specimens in Grade 1.4301 stainless steel. The material tests cover flat material in tension and in compression as well as corner material in tension. Modifications to the Ramberg–Osgood representation are suggested to ensure a close fit to both tensile and compressive behaviour over the full range of strains of interest. Results, including full load–end shortening curves, for a total of 37 stub column tests have been presented. The results have been used to develop an explicit relationship between cross-sectional slenderness and cross-sectional deformation capacity, which forms the basis for a proposed new design approach for stainless steel structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chung, K. F., & Narayanan, R. G. (1994) · OpenGrey (Institut de l'Information Scientifique et Technique) · Cited by 1,132
Full-range stress–strain curves for stainless steel alloys
Rasmussen, K. J. R. (2003) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(02)00018-4 · Cited by 989
Mirambell, E., & Real, E. (2000) · Journal of Constructional Steel Research · doi:10.1016/s0143-974x(99)00051-6 · Cited by 550
Numerical Modeling of Stainless Steel Structural Components—A Consistent Approach
Gardner, L., & Nethercot, D. A. (2004) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(2004)130:10(1586 · Cited by 410
Self-citationDesign of Cold‐Formed Stainless Steel Tubular Members. II: Beams
Rasmussen, K. J. R., & Hancock, G. J. (1993) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1993)119:8(2368 · Cited by 236
Design of Cold‐Formed Stainless Steel Tubular Members. I: Columns
Rasmussen, K. J. R., & Hancock, G. J. (1993) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1993)119:8(2349 · Cited by 232
Cited by
Description of stress–strain curves for stainless steel alloys
Arrayago, I., Real, E., & Gardner, L. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.001 · Cited by 563
Self-citationThe use of stainless steel in structures
Gardner, L. (2005) · Progress in Structural Engineering and Materials · doi:10.1002/pse.190 · Cited by 496
Self-citationNumerical Modeling of Stainless Steel Structural Components—A Consistent Approach
Gardner, L., & Nethercot, D. A. (2004) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(2004)130:10(1586 · Cited by 410
Self-citationMetal additive manufacturing in structural engineering – review, advances, opportunities and outlook
Gardner, L. (2023) · Structures · doi:10.1016/j.istruc.2022.12.039 · Cited by 398
Self-citationStructural design for non-linear metallic materials
Gardner, L., & Ashraf, M. (2006) · Engineering Structures · doi:10.1016/j.engstruct.2005.11.001 · Cited by 345
Self-citation
Metadata
- Authors
- Gardner, L., & Nethercot, D. A.
- Venue
- Journal of Constructional Steel Research
- Publisher
- Elsevier BV
- Published
- 2004-09
- Volume
- 60
- Issue
- 9
- Pages
- 1291-1318
- ISSN
- 0143-974X (ISSN-L)
- OpenAlex
- W1996624211
- Cited by
- 472
- References
- 6
- FWCI
- 33.81
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.