Synthesis of N-doped nanoporous carbon from walnut shell for enhancing CO2 adsorption capacity and separation
The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Abstract
Abstract Design of an optimum adsorbent for carbon dioxide (CO2) capture is likely one of the most important challenges of our time. In the present study, we report for the first time the fabrication of walnut shell-derived nanoporous carbon with chemical adsorption sites for CO2 adsorption at mediate (1 bar) and high pressures (10 bar) under room temperature by varying the preparation parameters. Based on the results, KOH activation through reaction with N groups of urea results in a great development of the pore structure, furthermore micropores are formed better by decreasing KOH/C mass ratio and activation temperature, and increasing the activation time, which cause higher adsorption at 1 bar. However, contrariwise conditions can form mesopores, leading to higher adsorption at higher pressures. Consequently, the value of CO2 adsorption capacity reached 7.42 and 14.03 mmol/g under optimum conditions at 1 and 10 bar, respectively. It was found that the CO2 adsorption capacity is dependent on both the nitrogen loading amount and the porous properties of adsorbent, and in specific the average pore diameter showed more effective role than surface area. Finally, the optimum adsorbents with heterogeneous surfaces and interactions represented promising choices to separate CO2 from CO2/CH4 and CO2/N2 binary mixtures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Wei, J., Zhou, D., Sun, Z., Deng, Y., Xia, Y., & Zhao, D. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202764 · Cited by 931
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Wang, R., Wang, P., Yan, X., Lang, J., Peng, C., & Xue, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am302077c · Cited by 475
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Assessment of the Role of Micropore Size and N-Doping in CO 2 Capture by Porous Carbons
Sevilla, M., Parra, J. B., & Fuertes, A. B. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401423b · Cited by 410
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Heidari, A., Younesi, H., Rashidi, A., & Ghoreyshi, A. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2013.06.007 · Cited by 195
Self-citation
Cited by
Activated carbons from biomass-based sources for CO2 capture applications
Abuelnoor, N., AlHajaj, A., Khaleel, M., Vega, L. F., & Abu-Zahra, M. R. M. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131111 · Cited by 310
Strategic use of biochar for CO2 capture and sequestration
Jung, S., Park, Y.-K., & Kwon, E. E. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.04.012 · Cited by 268
Recent advances in biochar-based adsorbents for CO2 capture
Guo, S., Li, Y., Wang, Y., Wang, L., Sun, Y., & Liu, L. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100059 · Cited by 201
Biomass-based carbon materials for CO2 capture: A review
Quan, C., Zhou, Y., Wang, J., Wu, C., & Gao, N. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102373 · Cited by 200
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Metadata
- Authors
- Rouzitalab, Z., Mohammady Maklavany, D., Rashidi, A., & Jafarinejad, S.
- Venue
- Journal of Environmental Chemical Engineering
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 6
- Issue
- 5
- Pages
- 6653-6663
- ISSN
- 2213-2929 (ISSN-L)
- 2213-3437
- OpenAlex
- W2896995849
- Cited by
- 109
- References
- 19
- FWCI
- 4.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis of N-doped nanoporous carbon from walnut shell for enhancing CO2 adsorption capacity and separation. https://app.cochat.ai/papers/10.1016/j.jece.2018.10.035
- The paper
- Rouzitalab, Z., Mohammady Maklavany, D., Rashidi, A., & Jafarinejad, S. (2018). Synthesis of N-doped nanoporous carbon from walnut shell for enhancing CO2 adsorption capacity and separation. Journal of Environmental Chemical Engineering. https://doi.org/10.1016/j.jece.2018.10.035
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.