Surface modified montmorillonite with cationic surfactants: Preparation, characterization, and dye adsorption from aqueous solution
The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Abstract
This research tried to perform a comprehensive evaluation of dye (Reactive Red 120 (RR120)) removal by the surfactant-modified montmorillonite (Mt). For this purpose, the experiments were carried on at two levels. In the first level, the adsorption behavior of cetylpyridinium chloride monohydrate (CPCM) and alkyl dimethyl benzyl ammonium chloride (ADBAC) onto Mt was assessed by electrical conductivity technique. In this manner, the critical micelle concentration (CMC) point of ADBAC and CPCM were achieved 0.41 g/L and 2.02 g/L, respectively. Next, modified Mt, as efficient adsorbent, was utilized to toxic anionic dye adsorption from model wastewater. The attraction force between the positive surface charge of modified Mt and the negative charge of RR120 dye molecules leads to the high adsorption capacity. The mostly-known adsorption isotherm models were applied to the experimental data. The obtained data of surfactants adsorption onto Mt, as well as the adsorption data related to RR120 dye removal using modified Mt, were well fitted with the Langmuir isotherm model. The maximum Langmuir capacity for CPCM and ADBAC adsorption by Mt was achieved 183.0 mg/g and 311.8 mg/g, respectively. This amount was found 227.3 mg/g and 243.09 mg/g regarding RR120 adsorption by ADBAC and CPCM-modified Mt, respectively. Also, the hydration inhibitive ability of surfactants was investigated, and the characteristic of them was examined through extensive inhibition evaluation experiments, including settlement, zeta potential, XRD, FTIR, particle size, and SEM analyses.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
FTIR techniques in clay mineral studies
Madejová, J. (2003) · Vibrational Spectroscopy · doi:10.1016/s0924-2031(02)00065-6 · Cited by 1,992
A review on metal-organic frameworks: Synthesis and applications
Safaei, M., Foroughi, M. M., Ebrahimpoor, N., Jahani, S., Omidi, A., & Khatami, M. (2019) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2019.06.007 · Cited by 943
Organic–inorganic hybrid of chitosan/organoclay bionanocomposites for hexavalent chromium uptake
Pandey, S., & Mishra, S. B. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.05.031 · Cited by 271
Kenawy, E.-R., Ghfar, A. A., Wabaidur, S. M., Khan, M. A., Siddiqui, M. R., Alothman, Z. A., Alqadami, A. A., & Hamid, M. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.04.121 · Cited by 268
Ahmed, M. J. (2016) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2015.10.027 · Cited by 241
Thue, P. S., Sophia, A. C., Lima, E. C., Wamba, A. G. N., de Alencar, W. S., dos Reis, G. S., Rodembusch, F. S., & Dias, S. L. P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.278 · Cited by 228
He, Y., Jiang, D. B., Chen, J., Jiang, D. Y., & Zhang, Y. X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.066 · Cited by 219
Mahmoodi, N. M., Taghizadeh, M., Taghizadeh, A., Abdi, J., Hayati, B., & Shekarchi, A. A. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.02.211 · Cited by 217
Self-citationBentahar, S., Dbik, A., Khomri, M. E., Messaoudi, N. E., & Lacherai, A. (2017) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2017.11.003 · Cited by 195
Mahmoodi, N. M., Taghizadeh, M., & Taghizadeh, A. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.12.050 · Cited by 172
Self-citationSantos, S. C. R., & Boaventura, R. A. R. (2016) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2016.02.009 · Cited by 164
Mahmoodi, N. M., Oveisi, M., Taghizadeh, A. A., & Taghizadeh, M. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.01.107 · Cited by 161
Self-citationZhang, Z., Liu, B., Lv, K., Sun, J., & Deng, K. (2014) · Green Chemistry · doi:10.1039/c4gc00062e · Cited by 156
Mahmoodi, N. M., Taghizadeh, M., & Taghizadeh, A. A. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.07.108 · Cited by 155
Self-citationMahmoodi, N. M., Taghizadeh, A., Taghizadeh, M., & Abdi, J. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.06.018 · Cited by 151
Self-citationJawad, A. H., Mamat, N. F. H., Hameed, B. H., & Ismail, K. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.102965 · Cited by 145
A novel nonionic surfactant for inhibiting shale hydration
Shadizadeh, S. R., Moslemizadeh, A., & Shirmardi, A. (2015) · Applied Clay Science · doi:10.1016/j.clay.2015.09.006 · Cited by 139
Direct dyes removal using modified magnetic ferrite nanoparticle
Mahmoodi, N. M., Abdi, J., & Bastani, D. S. (2014) · Journal of Environmental Health Science and Engineering · doi:10.1186/2052-336x-12-96 · Cited by 131
Self-citationAssessment of swelling inhibitive effect of CTAB adsorption on montmorillonite in aqueous phase
Moslemizadeh, A., Aghdam, S. K., Shahbazi, K., Aghdam, H. K.-Y., & Fatemeh, A. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.04.014 · Cited by 123
Makhado, E., Pandey, S., Nomngongo, P. N., et al. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.08.093 · Cited by 122
Dendrimer functionalized nanoarchitecture: Synthesis and binary system dye removal
Mahmoodi, N. M. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2013.12.010 · Cited by 122
Self-citationPhotodegradation of Dyes Using Multiwalled Carbon Nanotube and Ferrous Ion
Mahmoodi, N. M. (2013) · Journal of Environmental Engineering · doi:10.1061/(asce)ee.1943-7870.0000762 · Cited by 120
Self-citationNickel Ferrite Nanoparticle: Synthesis, Modification by Surfactant and Dye Removal Ability
Mahmoodi, N. M. (2013) · Water Air & Soil Pollution · doi:10.1007/s11270-012-1419-7 · Cited by 116
Self-citationEnhanced Biocide Mitigation of Field Biofilm Consortia by a Mixture of D-Amino Acids
Li, Y., Jia, R., Almahamedh, H. H., Xu, D., & Gu, T. (2016) · Frontiers in Microbiology · doi:10.3389/fmicb.2016.00896 · Cited by 116
dos Santos, A., Viante, M. F., Pochapski, D. J., Downs, A. J., & Almeida, C. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.02.041 · Cited by 110
Vieira, R. M., Vilela, P. B., Becegato, V. A., & Paulino, A. T. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.04.018 · Cited by 109
Ren, H., Tian, S., Zhu, M., Zhao, Y., Li, K., Ma, Q., Ding, S., Gao, J. F., & Miao, Z. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.10.024 · Cited by 95
Bilal, M., Rasheed, T., Iqbal, H. M. N., Hu, H., Wang, W., & Zhang, X. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.02.062 · Cited by 89
Moslemizadeh, A., Shadizadeh, S. R., & Moomenie, M. (2015) · Applied Clay Science · doi:10.1016/j.clay.2014.12.025 · Cited by 87
Natural Bentonite Clay and Its Composites for Dye Removal: Current State and Future Potential
Pandey, S., & Ramontja, J. (2016) · Cited by 86
Maiti, S., Pramanik, A., Chattopadhyay, S., De, G., & Mahanty, S. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.11.010 · Cited by 84
Synthesis of a novel CoFe2O4/chitosan magnetic composite for fast adsorption of indigotine blue dye
dos Santos, J. M. N., Pereira, C. R., Pinto, L. A. D. A., Frantz, T. S., Lima, E. C., Foletto, E. L., & Dotto, G. L. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.04.054 · Cited by 83
Nourani, M., Baghdadi, M., Javan, M., & Bidhendi, G. N. (2016) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2016.03.028 · Cited by 82
Hassani, A., Khataee, A., Karaca, S., & Fathinia, M. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.03.032 · Cited by 80
Guz, L., Curutchet, G. A., Sánchez, R. M. T., & Candal, R. (2014) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2014.02.007 · Cited by 78
Wang, G., Lian, C., Xi, Y., Sun, Z., & Zheng, S. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.02.020 · Cited by 77
Montmorillonite-alginate beads: Natural mineral and biopolymers based sorbent of paraquat herbicides
Etcheverry, M., Cappa, V. A., Trelles, J. A., & Zanini, G. P. (2017) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2017.11.018 · Cited by 73
Varadwaj, G. B. B., Rana, S., Parida, K. M., & Nayak, B. B. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00042k · Cited by 71
Irawan, C., Nata, I. F., & Lee, C. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103000 · Cited by 61
Ma, L., Zhu, J., Xi, Y., Zhu, R., He, H., Liang, X., & Ayoko, G. A. (2016) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2016.02.032 · Cited by 54
Abdel-Ghani, N. T., El-Chaghaby, G. A., Rawash, E.-S. A., & Lima, E. C. (2019) · Journal of Advanced Research · doi:10.1016/j.jare.2018.12.004 · Cited by 51
Pires, J., Juźków, J., & Pinto, M. L. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.02.019 · Cited by 47
Mahmoodi, N. M., Taghizadeh, M., & Taghizadeh, A. A. (2018) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-018-0162-1 · Cited by 45
Self-citationBelbel, A., Kharroubi, M., Janot, J., Abdessamad, M., Haouzi, A., Lefkaier, I. K., & Balme, S. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.08.080 · Cited by 44
Effect of layer charges on exfoliation of montmorillonite in aqueous solutions
Chen, T., Yuan, Y., Zhao, Y., Rao, F., & Song, S. (2018) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2018.03.066 · Cited by 43
dos Santos, D. C., Adebayo, M. A., Lima, E. C., Pereira, S. D. F. P., Cataluña, R., Saucier, C., Thue, P. S., & Machado, F. M. (2015) · Journal of the Brazilian Chemical Society · doi:10.5935/0103-5053.20150053 · Cited by 41
Pereira, I. C., de Carvalho, K. Q., Passig, F. H., Ferreira, R. C., Domingues, R. C. P. R., Hoppen, M. I., Macioski, G., Nagalli, A., & Perretto, F. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.10.060 · Cited by 36
Patil, S. P., Shrivastava, V. S., Sonawane, G. H., & Sonawane, S. H. (2015) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2015.09.005 · Cited by 28
Sathvika, T., Mudaliyar, M., Rajesh, V., & Rajesh, N. (2018) · ChemistrySelect · doi:10.1002/slct.201702167 · Cited by 7
Cited by
Heterointerface engineering of water stable ZIF-8@ZIF-67: Adsorption of rhodamine B from water
Nazir, M. A., Najam, T., Shahzad, K., Wattoo, M. A., Hussain, T., Tufail, M. K., Shah, S. S. A., & Rehman, A. U. (2022) · Surfaces and Interfaces · doi:10.1016/j.surfin.2022.102324 · Cited by 224
Conductive polymers in water treatment: A review
Taghizadeh, A., Taghizadeh, M., Jouyandeh, M., Yazdi, M. K., Zarrintaj, P., Saeb, M. R., Lima, E. C., & Gupta, V. K. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2020.113447 · Cited by 177
Self-citationZango, Z. U., Garba, A., Garba, Z. N., Zango, M. U., Usman, F., & Lim, J.-W. (2022) · Sustainability · doi:10.3390/su142416441 · Cited by 105
Micó-Vicent, B., Perales Romero, E., Bermejo, R., Jordán-Núñez, J., Viqueira, V., & Pérez, J. (2021) · Applied Sciences · doi:10.3390/app112411992 · Cited by 11
Metadata
- Authors
- Mahmoodi, N. M., Taghizadeh, A., Taghizadeh, M., & AZimi Shahali Baglou, M.
- Venue
- Journal of Environmental Chemical Engineering
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 7
- Issue
- 4
- Pages
- 103243
- ISSN
- 2213-2929 (ISSN-L)
- 2213-3437
- OpenAlex
- W2955131243
- Cited by
- 159
- References
- 49
- FWCI
- 6.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.