Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Open accessThe DOI matches its Crossref record; 269 of the 269 references it cites were found in a registry or an index.
Abstract
Global climate change ensued by the rise in atmospheric CO2 levels is one of the greatest challenges our planet is facing today. This worldwide distress demands technologies that can contribute to our society toward “negative carbon emissions”. Carbon capture and storage (CCS) technologies are in important role for capturing CO2 from existing emission sources, such as industrial and energy production point sources, before new more prominent modifications to the energy infrastructure can be implemented. Recently, alongside point source capture, direct air capture (DAC) processes have emerged as highly sought-after technologies that are able to capture CO2 from the ambient air. Alongside the traditional inorganic adsorbents, a new class of solid porous adsorbents, called as metal-organic frameworks (MOFs) have emerged in recent years also, as a group of potentially very efficient materials to capture CO2. The promising results of MOF-based adsorbents have already achieved great interest and have contributed to their ever-accelerating research to develop new and even better adsorbents for both point source and DAC recovery technologies. This review highlights the research that has been focused on utilizing MOFs in the carbon capture processes, particularly targeting materials applicable to low CO2 partial pressures but also capturing processes in pure CO2 (1 bar) will be reviewed, because it is a widely used test condition for characterizing sorption properties of MOF adsorbents. Herein, we outline four major approaches, through which the CO2 adsorption capacity and selectivity can be boosted, including targeted modifications of the metal centers, pore size control, proper selection and substitution of linker units, and functionalization of MOFs by amines. The mechanisms of the sorption event are also reviewed from the perspective of both physisorption and chemisorption phenomena. At the end of the review, we briefly examine the variables related to the coordination of technical-economical, process-technical, and physicochemical properties of adsorbents, which both researchers and engineers should consider when developing new adsorbents and recovery processes, with emphasis on material processing, capture capacity, selectivity, regeneration cyclicity, and cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–269 of 269
An Ultrastable Metal Azolate Framework with Binding Pockets for Optimal Carbon Dioxide Capture
Wang, Z., Li, M., Peng, Y., Zhang, Z., Chen, W., & Huang, X. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201909046 · Cited by 91
Gel–Print–Grow: A New Way of 3D Printing Metal–Organic Frameworks
Lawson, S., Alwakwak, A.-A., Rownaghi, A. A., & Rezaei, F. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c18720 · Cited by 91
An overview of the materials and methodologies for CO 2 capture under humid conditions
Ray, B., Churipard, S. R., & Peter, S. C. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta08862a · Cited by 91
Bao, S., Krishna, R., He, Y., Qin, J., Su, Z., Li, S., Xie, W., Du, D., He, W.-W., Zhang, S.-R., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00256g · Cited by 90
Chen, C., Feng, N., Guo, Q., Li, Z., Li, X., Ding, J., Wang, L., Wan, H. L., & Guan, G. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.03.029 · Cited by 89
Yoo, D. K., Yoon, T.-U., Bae, Y., & Jhung, S. H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122496 · Cited by 89
Zhao, P., Zhang, G., Yan, H., & Zhao, Y. (2020) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2020.11.028 · Cited by 89
Recent advances in the capture and abatement of toxic gases and vapors by metal–organic frameworks
Zhang, Y., Cui, X., & Xing, H. (2021) · Materials Chemistry Frontiers · doi:10.1039/d1qm00516b · Cited by 88
Mao, V. Y., Milner, P. J., Lee, J., Forse, A. C., Kim, E. J., Siegelman, R. L., McGuirk, C. M., Zasada, L. B., Neaton, J. B., Long, J. R., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201915561 · Cited by 86
Structural and CO2 Capture Properties of Ethylenediamine-Modified HKUST-1 Metal–Organic Framework
Vrtovec, N., Mazaj, M., Buscarino, G., Terracina, A., Agnello, S., Arčon, I., Kovač, J., & Logar, N. Z. (2020) · Crystal Growth & Design · doi:10.1021/acs.cgd.0c00667 · Cited by 86
Zhong, R., Yu, X., Meng, W., Liu, J., Zhi, C., & Zou, R. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03597 · Cited by 85
Gaikwad, S., Kim, S., & Han, S. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.11.001 · Cited by 85
Direct air capture of CO 2 via crystal engineering
Custelcean, R. (2021) · Chemical Science · doi:10.1039/d1sc04097a · Cited by 85
Assessing the Role of Metal Identity on CO 2 Adsorption in MOFs Containing M–OH Functional Groups
Bien, C. E., Liu, Q., & Wade, C. R. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b04228 · Cited by 83
New chemistry for enhanced carbon capture: beyond ammonium carbamates
Forse, A. C., & Milner, P. J. (2020) · Chemical Science · doi:10.1039/d0sc06059c · Cited by 83
Capture of carbon dioxide from flue gas on TEPA-grafted metal-organic framework Mg2(dobdc)
Cao, Y. P., Song, F., Zhao, Y., & Zhong, Q. (2013) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(12)60267-8 · Cited by 82
Tailoring Metal–Organic Frameworks for CO2 Capture: The Amino Effect
Vitillo, J. G., Savonnet, M., Ricchiardi, G., & Bordiga, S. (2011) · ChemSusChem · doi:10.1002/cssc.201000458 · Cited by 82
Enhanced CO 2 adsorption capacity of amine-functionalized MIL-100(Cr) metal–organic frameworks
Cabello, C. P., Berlier, G., Magnacca, G., Rumori, P., & Palomino, G. T. (2014) · CrystEngComm · doi:10.1039/c4ce01265h · Cited by 80
Brandani, S., & Mangano, E. (2020) · Adsorption · doi:10.1007/s10450-020-00273-w · Cited by 80
Sharma, N., Dhankhar, S. S., Kumar, S., Kumar, T. J. D., & Nagaraja, C. M. (2018) · Chemistry - A European Journal · doi:10.1002/chem.201803842 · Cited by 78
Kim, D., & Coşkun, A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702501 · Cited by 77
NMR studies of adsorption and diffusion in porous carbonaceous materials
Forse, A. C., Merlet, C., Grey, C. P., & Griffin, J. M. (2021) · Progress in Nuclear Magnetic Resonance Spectroscopy · doi:10.1016/j.pnmrs.2021.03.003 · Cited by 73
Bolotov, V. A., Kovalenko, K. A., Samsonenko⧫, D. G., Han, X., Zhang, X., Smith, G. L., McCormick, L. J., Teat, S. J., Yang⧫, S., Lennox, M. J., et al. (2018) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b00138 · Cited by 72
Gándara-Loe, J., Pastor‐Pérez, L., Bobadilla, L. F., Odriozola, J. A., & Reina, T. R. (2021) · Reaction Chemistry & Engineering · doi:10.1039/d1re00034a · Cited by 72
Amino substituted Cu3(btc)2: a new metal–organic framework with a versatile functionality
Peikert, K., Hoffmann, F., & Fröba, M. (2012) · Chemical Communications · doi:10.1039/c2cc36220a · Cited by 70
Das, R., Muthukumar, D., Pillai, R. S., & Nagaraja, C. M. (2020) · Chemistry - A European Journal · doi:10.1002/chem.202002688 · Cited by 70
Kang, M., Kim, J. E., Kang, D. W., Lee, H. Y., Moon, D., & Hong, C. S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07965j · Cited by 69
Das, R., Dhankhar, S. S., & Nagaraja, C. M. (2019) · Inorganic Chemistry Frontiers · doi:10.1039/c9qi01058k · Cited by 69
A robust metal–organic framework for post-combustion carbon dioxide capture
Qazvini, O. T., & Telfer, S. G. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04121a · Cited by 67
Enhanced CO2 Solubility in Hybrid MCM-41: Molecular Simulations and Experiments
Ho, L. N., Pérez‐Pellitero, J., Porcheron, F., & Pellenq, R. J. ‐. (2011) · Langmuir · doi:10.1021/la2012765 · Cited by 65
Zhang, Z., Ding, Q., Cui, J., Cui, X., & Xing, H. (2020) · Science China Materials · doi:10.1007/s40843-020-1471-0 · Cited by 65
Taddei, M., & Petit, C. (2021) · Molecular Systems Design & Engineering · doi:10.1039/d1me00085c · Cited by 65
Lee, W. R., Kim, J. E., Lee, S. J., Kang, M., Kang, D. W., Lee, H. Y., Hiremath, V., Seo, J. G., Jin, H., Moon, D., et al. (2018) · ChemSusChem · doi:10.1002/cssc.201800363 · Cited by 63
Gaikwad, S., Kim, S., & Han, S. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.04.015 · Cited by 63
Strategically designed azolyl-carboxylate MOFs for potential humid CO 2 capture
Nandi, S., Haldar, S., Chakraborty, D., & Vaidhyanathan, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07145g · Cited by 62
Ullah, S., Bustam, M. A., Assiri, M. A., Al-Sehemi, A. G., Kareem, F. A. A., Mukhtar, A., Ayoub, M., & Gonfa, G. H. (2019) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2019.103014 · Cited by 62
Amine-functionalized mesoporous monolithic adsorbents for post-combustion carbon dioxide capture
Zhou, C., Yu, S., Ma, K., Liang, B., Tang, S., Liu, C., & Yue, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127675 · Cited by 62
Water adsorption properties of a Sc( iii ) porous coordination polymer for CO 2 capture applications
Álvarez, J. R., Peralta, R. A., Balmaseda, J., González‐Zamora, E., & Ibarra, I. A. (2015) · Inorganic Chemistry Frontiers · doi:10.1039/c5qi00176e · Cited by 61
Polyaniline-intercalated MIL-101: selective CO 2 sorption and supercapacitor properties
Aliev, S. B., Samsonenko⧫, D. G., Maximovskiy, E. A., Fedorovskaya, E. O., Sapchenko, S. A., & Петрович, Ф. В. (2016) · New Journal of Chemistry · doi:10.1039/c5nj03477a · Cited by 60
CO 2 capture under humid conditions in NH 2 -MIL-53(Al): the influence of the amine functional group
Zárate, J. A., Peralta, R. A., Bayliss, P. A., Howie, R. A., Sánchez-Serratos, M., Carmona‐Monroy, P., Solís-Ibarra, D., González‐Zamora, E., & Ibarra, I. A. (2016) · RSC Advances · doi:10.1039/c5ra26517g · Cited by 59
Yoo, G. Y., Lee, W. R., Jo, H., Park, J., Song, J. H., Lim, K. S., Moon, D., Jung, H. S., Lim, J., Han, S. S., et al. (2016) · Chemistry - A European Journal · doi:10.1002/chem.201600189 · Cited by 57
Cecilia, J. A., Vilarrasa‐García, E., Morales-Ospino, R., Bastos-Neto, M., Azevedo, D. C. S., & Rodríguez-Castellón, E. (2019) · Adsorption · doi:10.1007/s10450-019-00118-1 · Cited by 54
Nandi, S., Werner‐Zwanziger, U., & Vaidhyanathan, R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04241k · Cited by 49
Li, H., Wang, K., Hu, Z., Chen, Y., Verdegaal, W. M., Zhao, D., & Zhou, H.-C. “. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11300a · Cited by 49
Raksajati, A., Ho, M. T., & Wiley, D. E. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03633 · Cited by 47
Jeong, S., Kim, D., Shin, S., Moon, D., Cho, S. J., & Lah, M. S. (2014) · Chemistry of Materials · doi:10.1021/cm404239s · Cited by 45
IAST predictions vs co-adsorption measurements for CO2 capture and separation on MIL-100 (Fe)
Billemont, P., Heymans, N., Normand, P., & Weireld, G. D. (2016) · Adsorption · doi:10.1007/s10450-016-9825-6 · Cited by 43
Enhanced selective adsorption of CO 2 on nitrogen-doped porous carbon monoliths derived from IRMOF-3
Ding, S., Dong, Q., Hu, J., Xiao, W., Liu, X., Liao, L., & Zhang, N. (2016) · Chemical Communications · doi:10.1039/c6cc04416f · Cited by 42
Babaei, M., Salehi, S., Anbia, M., & Kazemipour, M. (2018) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.8b00014 · Cited by 41
Metal–Organic Framework Adsorbent for Practical Capture of Trace Carbon Dioxide
Park, J., Park, J. R., Choe, J. H., Kim, S., Kang, M., Kang, D. W., Kim, J. Y., Jeong, Y. W., & Hong, C. S. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c16224 · Cited by 40
Perspectives on NMR studies of CO2 adsorption
Bernin, D., & Hedin, N. (2018) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2018.02.003 · Cited by 39
Humidity-induced CO 2 capture enhancement in Mg-CUK-1
Sagastuy-Breña, M., Mileo, P. G. M., Sánchez‐González, E., Reynolds, J. E., Jurado‐Vázquez, T., Balmaseda, J., González‐Zamora, E., Devautour‐Vinot, S., Humphrey, S. M., Maurin, G., et al. (2018) · Dalton Transactions · doi:10.1039/c8dt03365j · Cited by 38
A Free Tetrazolyl Decorated Metal–Organic Framework Exhibiting High and Selective CO2 Adsorption
Lu, Z., Meng, F., Du, L., Jiang, W., Cao, H., Duan, J., Huang, H., & He, H. (2018) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b02031 · Cited by 37
Song, X., Zhang, M., Duan, J., & Bai, J. (2019) · Chemical Communications · doi:10.1039/c8cc10116g · Cited by 37
Recent Advances of Porous Solids for Ultradilute CO2 Capture
Liu, R.-S., Xu, S. H., Hao, G., & Lu, A. (2021) · Chemical Research in Chinese Universities · doi:10.1007/s40242-021-1394-x · Cited by 37
Bernini, M. C., Blanco, A. A. G., Rocha, J. V., Fairen‐Jiménez, D., Sapag, K., Ramirez-Pastor, A. J., & Narda, G. E. (2015) · Dalton Transactions · doi:10.1039/c5dt03137k · Cited by 33
Chen, C., Jiang, Q., Xu, H., & Lin, Z. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b05239 · Cited by 33
Adsorption of carbon dioxide by a novel amine impregnated ZSM-5/KIT-6 composite
Lin, Z., Wei, J., Geng, L., Mei, D., & Liao, L. (2017) · RSC Advances · doi:10.1039/c7ra11235a · Cited by 32
Choe, J. H., Kang, D. W., Kang, M., Kim, H., Park, J. R., Kim, D. W., & Hong, C. S. (2019) · Materials Chemistry Frontiers · doi:10.1039/c9qm00581a · Cited by 32
Sorption kinetics: measurement of surface resistance
Ruthven, D. M., Kärger, J., Brandani, S., & Mangano, E. (2020) · Adsorption · doi:10.1007/s10450-020-00257-w · Cited by 32
Lu, Z., Zhang, J., Duan, J., Du, L., & Cheng, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02852k · Cited by 29
Controllable CO2 Capture in Metal–Organic Frameworks: Making Targeted Active Sites Respond to Light
Jiang, Y., Shi, X.-C., Tan, P., Qi, S., Gu, C., Yang, T., Peng, S., Liu, X., & Sun, L. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04126 · Cited by 29
Confinement of H 2 O and EtOH to enhance CO 2 capture in MIL-53(Al)-TDC
González-Martínez, G. A., Jurado‐Vázquez, T., Solís-Ibarra, D., Vargas, B. C., Sánchez‐González, E., Martı́nez, A., Vargas, R., González‐Zamora, E., & Ibarra, I. A. (2018) · Dalton Transactions · doi:10.1039/c8dt01369a · Cited by 28
Popa, A., Borcănescu, S., Holclajtner-Antunović, I. D., Bajuk‐Bogdanović, D., & Uskoković‐Marković, S. (2020) · Journal of Porous Materials · doi:10.1007/s10934-020-00974-1 · Cited by 27
Kim, H., Lee, H. Y., Kang, D. W., Kang, M., Choe, J. H., Lee, W. R., & Hong, C. S. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.9b02126 · Cited by 24
Carbon Capture and Sequestration (CCS)
Folger, P. F. (2013) · Springer eBooks · doi:10.1007/978-3-642-28036-8_100191 · Cited by 22
Kim, D., Park, J., Kim, Y. S., & Lah, M. S. (2017) · Scientific Reports · doi:10.1038/srep41447 · Cited by 19
Ju, S. E., Choe, J. H., Kang, M., Kang, D. W., Kim, H., Lee, J., & Hong, C. S. (2021) · ChemSusChem · doi:10.1002/cssc.202100582 · Cited by 13
Adsorptive and Membrane-Type Separations: A Bibliographical Update (1998)
Ray, M. S. (1999) · Adsorption Science & Technology · doi:10.1177/026361749901700307 · Cited by 7
Cited by
Feizi-Afshar, B., Vafajoo, L., & Farzi, A. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2025.102921 · Cited by 4
Metadata
- Authors
- Mahajan, S., & Lahtinen, M.
- Venue
- Journal of Environmental Chemical Engineering
- Publisher
- Elsevier BV
- Published
- 2022-12
- Volume
- 10
- Issue
- 6
- Pages
- 108930
- ISSN
- 2213-2929 (ISSN-L)
- 2213-3437
- OpenAlex
- W4308308365
- Cited by
- 282
- References
- 269
- FWCI
- 16.90
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.