The DOI matches its Crossref record; 269 of the 269 references it cites were found in a registry or an index.
Recent progress in metal-organic frameworks (MOFs) for CO2 capture at different pressures
Open accessAbstract
Global climate change ensued by the rise in atmospheric CO2 levels is one of the greatest challenges our planet is facing today. This worldwide distress demands technologies that can contribute to our society toward “negative carbon emissions”. Carbon capture and storage (CCS) technologies are in important role for capturing CO2 from existing emission sources, such as industrial and energy production point sources, before new more prominent modifications to the energy infrastructure can be implemented. Recently, alongside point source capture, direct air capture (DAC) processes have emerged as highly sought-after technologies that are able to capture CO2 from the ambient air. Alongside the traditional inorganic adsorbents, a new class of solid porous adsorbents, called as metal-organic frameworks (MOFs) have emerged in recent years also, as a group of potentially very efficient materials to capture CO2. The promising results of MOF-based adsorbents have already achieved great interest and have contributed to their ever-accelerating research to develop new and even better adsorbents for both point source and DAC recovery technologies. This review highlights the research that has been focused on utilizing MOFs in the carbon capture processes, particularly targeting materials applicable to low CO2 partial pressures but also capturing processes in pure CO2 (1 bar) will be reviewed, because it is a widely used test condition for characterizing sorption properties of MOF adsorbents. Herein, we outline four major approaches, through which the CO2 adsorption capacity and selectivity can be boosted, including targeted modifications of the metal centers, pore size control, proper selection and substitution of linker units, and functionalization of MOFs by amines. The mechanisms of the sorption event are also reviewed from the perspective of both physisorption and chemisorption phenomena. At the end of the review, we briefly examine the variables related to the coordination of technical-economical, process-technical, and physicochemical properties of adsorbents, which both researchers and engineers should consider when developing new adsorbents and recovery processes, with emphasis on material processing, capture capacity, selectivity, regeneration cyclicity, and cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Cambridge Structural Database
Groom, C. R., Bruno, I. J., Lightfoot, M. P., & Ward, S. C. (2016) · Acta Crystallographica Section B Structural Science, Crystal Engineering and Materials · doi:10.1107/s2052520616003954 · Cited by 10,297
Mercury CSD 2.0– new features for the visualization and investigation of crystal structures
Macrae, C. F., Bruno, I. J., Chisholm, J. A., Edgington, P. R., McCabe, P., Pidcock, E., Rodriguez-Monge, L., Taylor, R., van de Streek, J., & Wood, P. A. (2008) · Journal of Applied Crystallography · doi:10.1107/s0021889807067908 · Cited by 8,863
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Eddaoudi, M., Moler, D. B., Li, H., Chen, B., Reineke, T. M., O'Keeffe, M., & Yaghi, O. M. (2001) · Accounts of Chemical Research · doi:10.1021/ar000034b · Cited by 5,180
Horcajada, P., Chalati, T., Serre, C., Gillet, B., Sebrie, C., Baati, T., Eubank, J. F., Heurtaux, D., Clayette, P., Kreuz, C., et al. (2010) · Nature Materials · doi:10.1038/nmat2608 · Cited by 4,260
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Engineering Metal Organic Frameworks for Heterogeneous Catalysis
Corma, A., García, H., & Llabrés i Xamena, F. X. (2010) · Chemical Reviews · doi:10.1021/cr9003924 · Cited by 3,478
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876 · cited 2×
“As exemplified by the comparative studies of Yaghi [87] and many others[89 – 91], one of the major benefits of MOF materials is their structural modularity, which allows accurate crystal design of the structures, aiming to consider the structural and geometrical needs on an…”
InfluentialCarbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Strategies for Hydrogen Storage in Metal–Organic Frameworks
Rowsell, J. L. C., & Yaghi, O. M. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462786 · Cited by 2,463
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation
Nugent, P., Belmabkhout, Y., Burd, S. D., Cairns, A. J., Luebke, R., Forrest, K., Pham, T., Ma, S., Space, B., Wojtas, L., et al. (2013) · Nature · doi:10.1038/nature11893 · Cited by 2,387
A Rationale for the Large Breathing of the Porous Aluminum Terephthalate (MIL‐53) Upon Hydration
Loiseau, T., Serre, C., Huguenard, C., Fink, G., Taulelle, F., Henry, M., Bataille, T., & Férey, G. (2004) · Chemistry – A European Journal · doi:10.1002/chem.200305413 · Cited by 2,166
The teraton challenge. A review of fixation and transformation of carbon dioxide
Mikkelsen, M., Jørgensen, M., & Krebs, F. C. (2010) · Energy Environ. Sci. · doi:10.1039/b912904a · Cited by 2,157
Nanoscale Metal–Organic Frameworks for Biomedical Imaging and Drug Delivery
Della Rocca, J., Liu, D., & Lin, W. (2011) · Accounts of Chemical Research · doi:10.1021/ar200028a · Cited by 2,087
Metal–Organic Framework Materials with Ultrahigh Surface Areas: Is the Sky the Limit?
Farha, O. K., Eryazici, I., Jeong, N. C., Hauser, B. G., Wilmer, C. E., Sarjeant, A. A., Snurr, R. Q., Nguyen, S. T., Yazaydın, A. Ö., & Hupp, J. T. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3055639 · Cited by 1,958
A Process for Capturing CO2 from the Atmosphere
Keith, D. W., Holmes, G., St. Angelo, D., & Heidel, K. (2018) · Joule · doi:10.1016/j.joule.2018.05.006 · Cited by 1,910
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Fu, Y., Sun, D., Chen, Y., Huang, R., Ding, Z., Fu, X., & Li, Z. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201108357 · Cited by 1,741
Improving MOF stability: approaches and applications
Ding, M., Cai, X., & Jiang, H.-L. (2019) · Chemical Science · doi:10.1039/c9sc03916c · Cited by 1,666
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
The chemistry of metal–organic frameworks for CO2 capture, regeneration and conversion
Trickett, C. A., Helal, A., Al-Maythalony, B. A., Yamani, Z. H., Cordova, K. E., & Yaghi, O. M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.45 · Cited by 1,524
Cooperative insertion of CO2 in diamine-appended metal-organic frameworks
McDonald, T. M., Mason, J. A., Kong, X., Bloch, E. D., Gygi, D., Dani, A., Crocellà, V., Giordanino, F., Odoh, S. O., Drisdell, W. S., et al. (2015) · Nature · doi:10.1038/nature14327 · Cited by 1,342
Progress in adsorption-based CO2capture by metal–organic frameworks
Liu, J., Thallapally, P. K., McGrail, B. P., Brown, D. R., & Liu, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15221a · Cited by 1,339
McDonald, T. M., Lee, W. R., Mason, J. A., Wiers, B. M., Hong, C. S., & Long, J. R. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300034j · Cited by 1,289
Britt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909718106 · Cited by 1,211
Techno-economic assessment of CO2 direct air capture plants
Fasihi, M., Efimova, O., & Breyer, C. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.086 · Cited by 1,171
(1995) · Filtration & Separation · doi:10.1016/s0015-1882(97)84188-2 · Cited by 1,169
Hydrogen Storage in a Microporous Metal−Organic Framework with Exposed Mn2+ Coordination Sites
Dincǎ, M., Dailly, A., Liu, Y., Brown, C. M., Neumann, D. A., & Long, J. R. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0656853 · Cited by 1,137
Xu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Room temperature synthesis of metal-organic frameworks: MOF-5, MOF-74, MOF-177, MOF-199, and IRMOF-0
Tranchemontagne, D. J., Hunt, J. R., & Yaghi, O. M. (2008) · Tetrahedron · doi:10.1016/j.tet.2008.06.036 · Cited by 1,091
A scalable metal-organic framework as a durable physisorbent for carbon dioxide capture
Lin, J.-B., Nguyen, T. T. T., Vaidhyanathan, R., Burner, J., Taylor, J. M., Durekova, H., Akhtar, F., Mah, R. K., Ghaffari-Nik, O., Marx, S., et al. (2021) · Science · doi:10.1126/science.abi7281 · Cited by 1,053
CO2 Capture and Separations Using MOFs: Computational and Experimental Studies
Yu, J., Xie, L.-H., Li, J.-R., Ma, Y., Seminario, J. M., & Balbuena, P. B. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00626 · Cited by 1,047
An Amine-Functionalized MIL-53 Metal−Organic Framework with Large Separation Power for CO 2 and CH 4
Couck, S., Denayer, J. F. M., Baron, G. V., Rémy, T., Gascon, J., & Kapteijn, F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja900555r · Cited by 988
Metal–Organic Frameworks as A Tunable Platform for Designing Functional Molecular Materials
Wang, C., Liu, D., & Lin, W. (2013) · Journal of the American Chemical Society · doi:10.1021/ja308229p · Cited by 981
Destruction of chemical warfare agents using metal–organic frameworks
Mondloch, J. E., Katz, M. J., Isley III, W. C., Ghosh, P., Liao, P., Bury, W., Wagner, G. W., Hall, M. G., DeCoste, J. B., Peterson, G. W., et al. (2015) · Nature Materials · doi:10.1038/nmat4238 · Cited by 967
Improvements in the GISTEMP uncertainty model
Lenssen, N. J. L., Schmidt, G. A., Hansen, J. E., Menne, M. J., Persin, A., Ruedy, R., & Zyss, D. (2019) · Journal of Geophysical Research: Atmospheres · doi:10.1029/2018jd029522 · Cited by 962
Metal Organic Framework Catalysis: Quo vadis?
Gascon, J., Corma, A., Kapteijn, F., & Llabrés i Xamena, F. X. (2014) · ACS Catalysis · doi:10.1021/cs400959k · Cited by 960
Metal–Organic Frameworks for Air Purification of Toxic Chemicals
DeCoste, J. B., & Peterson, G. W. (2014) · Chemical Reviews · doi:10.1021/cr4006473 · Cited by 958
An, J., Geib, S. J., & Rosi, N. L. (2010) · Journal of the American Chemical Society · doi:10.1021/ja909169x · Cited by 937
Anderson, T. R., Hawkins, E., & Jones, P. D. (2016) · Endeavour · doi:10.1016/j.endeavour.2016.07.002 · Cited by 929
Vaidhyanathan, R., Iremonger, S. S., Shimizu, G. K. H., Boyd, P. G., Alavi, S., & Woo, T. K. (2010) · Science · doi:10.1126/science.1194237 · Cited by 927
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions
Xiang, S., He, Y., Zhang, Z., Wu, H., Zhou, W., Krishna, R., & Chen, B. (2012) · Nature Communications · doi:10.1038/ncomms1956 · Cited by 875
Metal organic frameworks for electrochemical applications
Morozan, A., & Jaouen, F. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22989g · Cited by 870
Secondary building units as the turning point in the development of the reticular chemistry of MOFs
Kalmutzki, M. J., Hanikel, N., & Yaghi, O. M. (2018) · Science Advances · doi:10.1126/sciadv.aat9180 · Cited by 861
Metal–organic frameworks as potential drug carriers
Huxford, R. C., Della Rocca, J., & Lin, W. (2010) · Current Opinion in Chemical Biology · doi:10.1016/j.cbpa.2009.12.012 · Cited by 840
Metal–Organic Frameworks for Light Harvesting and Photocatalysis
Wang, J.-L., Wang, C., & Lin, W. (2012) · ACS Catalysis · doi:10.1021/cs3005874 · Cited by 802
Postsynthetic Tuning of Metal–Organic Frameworks for Targeted Applications
Islamoglu, T., Goswami, S., Li, Z., Howarth, A. J., Farha, O. K., & Hupp, J. T. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00577 · Cited by 796
Mixed-metal metal–organic frameworks
Abednatanzi, S., Gohari Derakhshandeh, P., Depauw, H., Coudert, F.-X., Vrielinck, H., Van Der Voort, P., & Leus, K. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00337h · Cited by 741
Air as the renewable carbon source of the future: an overview of CO2 capture from the atmosphere
Goeppert, A., Czaun, M., Surya Prakash, G. K., & Olah, G. A. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21586a · Cited by 724
Amine-Grafted MCM-48 and Silica Xerogel as Superior Sorbents for Acidic Gas Removal from Natural Gas
Huang, H. Y., Yang, R. T., Chinn, D., & Munson, C. L. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie020440u · Cited by 713
Made-to-order metal-organic frameworks for trace carbon dioxide removal and air capture
Shekhah, O., Belmabkhout, Y., Chen, Z., Guillerm, V., Cairns, A., Adil, K., & Eddaoudi, M. (2014) · Nature Communications · doi:10.1038/ncomms5228 · Cited by 713
McQueen, N., Gomes, K. V., McCormick, C., Blumanthal, K., Pisciotta, M., & Wilcox, J. (2021) · Progress in Energy · doi:10.1088/2516-1083/abf1ce · Cited by 702
Direct air capture: process technology, techno-economic and socio-political challenges
Erans, M., Sanz-Pérez, E. S., Hanak, D. P., Clulow, Z., Reiner, D. M., & Mutch, G. A. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03523a · Cited by 688
Sorbents for the Direct Capture of CO 2 from Ambient Air
Shi, X., Xiao, H., Azarabadi, H., Song, J., Wu, X., Chen, X., & Lackner, K. S. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906756 · Cited by 679
Tuning the Adsorption Properties of UiO-66 via Ligand Functionalization
Cmarik, G. E., Kim, M., Cohen, S. M., & Walton, K. S. (2012) · Langmuir · doi:10.1021/la3035352 · Cited by 638
Porous materials with pre-designed single-molecule traps for CO2 selective adsorption
Li, J.-R., Yu, J., Lu, W., Sun, L.-B., Sculley, J., Balbuena, P. B., & Zhou, H.-C. (2013) · Nature Communications · doi:10.1038/ncomms2552 · Cited by 631
Can Metal–Organic Framework Materials Play a Useful Role in Large‐Scale Carbon Dioxide Separations?
Keskin, S., van Heest, T. M., & Sholl, D. S. (2010) · ChemSusChem · doi:10.1002/cssc.201000114 · Cited by 610
Tuning MOF CO2 Adsorption Properties via Cation Exchange
An, J., & Rosi, N. L. (2010) · Journal of the American Chemical Society · doi:10.1021/ja1012992 · Cited by 599
DeCoste, J. B., Peterson, G. W., Schindler, B. J., Killops, K. L., Browe, M. A., & Mahle, J. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12497e · Cited by 591
Deria, P., Mondloch, J. E., Tylianakis, E., Ghosh, P., Bury, W., Snurr, R. Q., Hupp, J. T., & Farha, O. K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408959g · Cited by 591
Zhang, W., Hu, Y., Ge, J., Jiang, H.-L., & Yu, S.-H. (2014) · Journal of the American Chemical Society · doi:10.1021/ja509960n · Cited by 588
Adsorption characteristics of carbon dioxide on organically functionalized SBA-15
Hiyoshi, N., Yogo, K., & Yashima, T. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.06.010 · Cited by 588
Direct Air Capture of CO2 by Physisorbent Materials
Kumar, A., Madden, D. G., Lusi, M., Chen, K., Daniels, E. A., Curtin, T., Perry, J. J., & Zaworotko, M. J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506952 · Cited by 588
Li, P.-Z., Wang, X.-J., Liu, J., Lim, J. S., Zou, R., & Zhao, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13335 · Cited by 588
Bhatt, P. M., Belmabkhout, Y., Cadiau, A., Adil, K., Shekhah, O., Shkurenko, A., Barbour, L. J., & Eddaoudi, M. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05345 · Cited by 553
Serra-Crespo, P., Ramos-Fernandez, E. V., Gascon, J., & Kapteijn, F. (2011) · Chemistry of Materials · doi:10.1021/cm103644b · Cited by 538
Adsorption of CO2 and CH4 on a magnesium-based metal organic framework
Bao, Z., Yu, L., Ren, Q., Lu, X., & Deng, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.09.065 · Cited by 527
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
McDonald, T. M., D'Alessandro, D. M., Krishna, R., & Long, J. R. (2011) · Chemical Science · doi:10.1039/c1sc00354b · Cited by 522
Carbon Dioxide Capture Adsorbents: Chemistry and Methods
Patel, H. A., Byun, J., & Yavuz, C. T. (2017) · ChemSusChem · doi:10.1002/cssc.201601545 · Cited by 492
Harlick, P. J. E., & Sayari, A. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060774+ · Cited by 488
A Porous Coordination Copolymer with over 5000 m2/g BET Surface Area
Koh, K., Wong-Foy, A. G., & Matzger, A. J. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809985t · Cited by 487
Flaig, R. W., Osborn Popp, T. M., Fracaroli, A. M., Kapustin, E. A., Kalmutzki, M. J., Altamimi, R. M., Fathieh, F., Reimer, J. A., & Yaghi, O. M. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06382 · Cited by 481
Metal–organic framework materials for light-harvesting and energy transfer
So, M. C., Wiederrecht, G. P., Mondloch, J. E., Hupp, J. T., & Farha, O. K. (2015) · Chemical Communications · doi:10.1039/c4cc09596k · Cited by 473
Kizzie, A. C., Wong-Foy, A. G., & Matzger, A. J. (2011) · Langmuir · doi:10.1021/la200547k · Cited by 473
Amine functionalised metal organic frameworks (MOFs) as adsorbents for carbon dioxide
Arstad, B., Fjellvåg, H., Kongshaug, K. O., Swang, O., & Blom, R. (2008) · Adsorption · doi:10.1007/s10450-008-9137-6 · Cited by 472
Capture of carbon dioxide from ambient air
Lackner, K. S. (2009) · The European Physical Journal Special Topics · doi:10.1140/epjst/e2009-01150-3 · Cited by 468
Li, B., Zhang, Z., Li, Y., Yao, K., Zhu, Y., Deng, Z., Yang, F., Zhou, X., Li, G., Wu, H., et al. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201105966 · Cited by 467
Application of Amine-Tethered Solid Sorbents for Direct CO2 Capture from the Ambient Air
Choi, S., Drese, J. H., Eisenberger, P. M., & Jones, C. W. (2011) · Environmental Science & Technology · doi:10.1021/es102797w · Cited by 466
Recent advances in direct air capture by adsorption
Zhu, X., Xie, W., Wu, J., Miao, Y., Xiang, C., Chen, C., Ge, B., Gan, Z., Yang, F., Zhang, M., et al. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00970b · Cited by 456
Queen, W. L., Hudson, M. R., Bloch, E. D., Mason, J. A., Gonzalez, M. I., Lee, J. S., Gygi, D., Howe, J. D., Lee, K., Darwish, T. A., et al. (2014) · Chem. Sci. · doi:10.1039/c4sc02064b · Cited by 446
Cooperative carbon capture and steam regeneration with tetraamine-appended metal–organic frameworks
Kim, E. J., Siegelman, R. L., Jiang, H. Z. H., Forse, A. C., Lee, J.-H., Martell, J. D., Milner, P. J., Falkowski, J. M., Neaton, J. B., Reimer, J. A., et al. (2020) · Science · doi:10.1126/science.abb3976 · Cited by 446
Predicting multicomponent adsorption: 50 years of the ideal adsorbed solution theory
Walton, K. S., & Sholl, D. S. (2015) · AIChE Journal · doi:10.1002/aic.14878 · Cited by 444
Carbon Dioxide Capture from Atmospheric Air Using Sodium Hydroxide Spray
Stolaroff, J. K., Keith, D. W., & Lowry, G. V. (2008) · Environmental Science & Technology · doi:10.1021/es702607w · Cited by 443
Metal‐Organic Frameworks for Carbon Dioxide Capture and Methane Storage
Lin, Y., Kong, C., Zhang, Q., & Chen, L. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601296 · Cited by 443
Recent advances in process engineering and upcoming applications of metal–organic frameworks
Ryu, U., Jee, S., Rao, P. C., Shin, J., Ko, C., Yoon, M., Park, K. S., & Choi, K. M. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213544 · Cited by 439
An amine-functionalized metal organic framework for preferential CO2 adsorption at low pressures
Vaidhyanathan, R., Iremonger, S. S., Dawson, K. W., & Shimizu, G. K. H. (2009) · Chemical Communications · doi:10.1039/b911481e · Cited by 433
Metal–biomolecule frameworks (MBioFs)
Imaz, I., Rubio-Martínez, M., An, J., Solé-Font, I., Rosi, N. L., & Maspoch, D. (2011) · Chemical Communications · doi:10.1039/c1cc11202c · Cited by 426
Fracaroli, A. M., Furukawa, H., Suzuki, M., Dodd, M., Okajima, S., Gándara, F., Reimer, J. A., & Yaghi, O. M. (2014) · Journal of the American Chemical Society · doi:10.1021/ja503296c · Cited by 425
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
In-Situ Infrared Study of CO2 Adsorption on SBA-15 Grafted with γ-(Aminopropyl)triethoxysilane
Chang, A. C. C., Chuang, S. S. C., Gray, M., & Soong, Y. (2003) · Energy & Fuels · doi:10.1021/ef020176h · Cited by 389
Satyapal, S., Filburn, T., Trela, J., & Strange, J. (2001) · Energy & Fuels · doi:10.1021/ef0002391 · Cited by 389
Carbon dioxide capture and conversion by an acid-base resistant metal-organic framework
Liang, L., Liu, C., Jiang, F., Chen, Q., Zhang, L., Xue, H., Jiang, H.-L., Qian, J., Yuan, D., & Hong, M. (2017) · Nature Communications · doi:10.1038/s41467-017-01166-3 · Cited by 386
Carborane-based metal–organic frameworks as highly selective sorbents for CO2 over methane
Bae, Y.-S., Farha, O. K., Spokoyny, A. M., Mirkin, C. A., Hupp, J. T., & Snurr, R. Q. (2008) · Chemical Communications · doi:10.1039/b805785k · Cited by 383
Furukawa, H., Go, Y. B., Ko, N., Park, Y. K., Uribe-Romo, F. J., Kim, J., O’Keeffe, M., & Yaghi, O. M. (2011) · Inorganic Chemistry · doi:10.1021/ic201376t · Cited by 379
Selective anion exchange with nanogated isoreticular positive metal-organic frameworks
Zhao, X., Bu, X., Wu, T., Zheng, S.-T., Wang, L., & Feng, P. (2013) · Nature Communications · doi:10.1038/ncomms3344 · Cited by 370
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Reversible adsorption of carbon dioxide on amine surface-bonded silica gel
Leal, O., Bolívar, C., Ovalles, C., García, J. J., & Espidel, Y. (1995) · Inorganica Chimica Acta · doi:10.1016/0020-1693(95)04534-1 · Cited by 361
Computational and Experimental Studies on the Adsorption of CO, N2, and CO2on Mg-MOF-74
Valenzano, L., Civalleri, B., Chavan, S., Palomino, G. T., Areán, C. O., & Bordiga, S. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp102574f · Cited by 358
Recent advances in carbon dioxide capture with metal‐organic frameworks
Liu, Y., Wang, Z. U., & Zhou, H. (2012) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.1296 · Cited by 357
Direct Air Capture of CO2 Using Amine Functionalized MIL-101(Cr)
Darunte, L. A., Oetomo, A. D., Walton, K. S., Sholl, D. S., & Jones, C. W. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01692 · Cited by 353
Modification of the Mg/DOBDC MOF with Amines to Enhance CO2 Adsorption from Ultradilute Gases
Choi, S., Watanabe, T., Bae, T.-H., Sholl, D. S., & Jones, C. W. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz300328j · Cited by 352
Dietzel, P. D. C., Blom, R., & Fjellvåg, H. (2008) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.200701284 · Cited by 345
A Water Stable Metal–Organic Framework with Optimal Features for CO2 Capture
Yang, Q., Vaesen, S., Ragon, F., Wiersum, A. D., Wu, D., Lago, A., Devic, T., Martineau, C., Taulelle, F., Llewellyn, P. L., et al. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302682 · Cited by 341
Lee, W. R., Hwang, S. Y., Ryu, D. W., Lim, K. S., Han, S. S., Moon, D., Choi, J., & Hong, C. S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42328j · Cited by 329
Solid amine sorbents for CO2 capture by chemical adsorption: A review
Ünveren, E. E., Monkul, B. Ö., Sarıoğlan, Ş., Karademir, N., & Alper, E. (2017) · Petroleum · doi:10.1016/j.petlm.2016.11.001 · Cited by 325
Microwave synthesis and characterization of MOF-74 (M=Ni, Mg) for gas separation
Wu, X., Bao, Z., Yuan, B., Wang, J., Sun, Y., Luo, H., & Deng, S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.06.023 · Cited by 314
Liu, B., & Smit, B. (2009) · Langmuir · doi:10.1021/la900823d · Cited by 302
Hydrogen Selective NH2‐MIL‐53(Al) MOF Membranes with High Permeability
Zhang, F., Zou, X., Gao, X., Fan, S., Sun, F., Ren, H., & Zhu, G. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200084 · Cited by 302
CO2 Capture in Metal–Organic Framework Adsorbents: An Engineering Perspective
Hu, Z., Wang, Y., Shah, B. B., & Zhao, D. (2019) · Advanced Sustainable Systems · doi:10.1002/adsu.201800080 · Cited by 297
Qin, J.-S., Du, D.-Y., Li, W.-L., Zhang, J.-P., Li, S.-L., Su, Z.-M., Wang, X.-L., Xu, Q., Shao, K.-Z., & Lan, Y.-Q. (2012) · Chemical Science · doi:10.1039/c2sc00017b · Cited by 293
Socolow, R. H., Desmond, M. J., Aines, R. D., Blackstock, J. J., Bolland, O., Kaarsberg, T., Lewis, N. S., Mazzotti, M., Pfeffer, A., Sawyer, K., et al. (2011) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · Cited by 291
Controlling Cooperative CO2 Adsorption in Diamine-Appended Mg2(dobpdc) Metal–Organic Frameworks
Siegelman, R. L., McDonald, T. M., Gonzalez, M. I., Martell, J. D., Milner, P. J., Mason, J. A., Berger, A. H., Bhown, A. S., & Long, J. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05858 · Cited by 289
Milner, P. J., Siegelman, R. L., Forse, A. C., Gonzalez, M. I., Runčevski, T., Martell, J. D., Reimer, J. A., & Long, J. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07612 · Cited by 288
Hydrophobic Metal–Organic Frameworks: Assessment, Construction, and Diverse Applications
Xie, L., Xu, M., Liu, X., Zhao, M., & Li, J. (2020) · Advanced Science · doi:10.1002/advs.201901758 · Cited by 284
Low-energy sodium hydroxide recovery for CO2 capture from atmospheric air—Thermodynamic analysis
Mahmoudkhani, M., & Keith, D. W. (2009) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.02.003 · Cited by 282
A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, X. (., Liu, L., Luo, X., Xiao, G., Shiko, E., Zhang, R., Fan, X., Zhou, Y., Liu, Y., Zeng, Z., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114244 · Cited by 282
Nguyen, N. T. T., Furukawa, H., Gándara, F., Nguyen, H. T., Cordova, K. E., & Yaghi, O. M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403980 · Cited by 280
Water Sorption Cycle Measurements on Functionalized MIL-101Cr for Heat Transformation Application
Khutia, A., Rammelberg, H. U., Schmidt, T., Henninger, S., & Janiak, C. (2013) · Chemistry of Materials · doi:10.1021/cm304055k · Cited by 275
A new metal–organic framework with ultra-high surface area
Grünker, R., Bon, V., Müller, P., et al. (2014) · Chemical Communications · doi:10.1039/c4cc00113c · Cited by 273
Direct synthesis of amine-functionalized MIL-101(Cr) nanoparticles and application for CO2 capture
Lin, Y., Kong, C., & Chen, L. (2012) · RSC Advances · doi:10.1039/c2ra20641b · Cited by 264
Si, X., Jiao, C., Li, F., Zhang, J., Wang, S., Liu, S., Li, Z., Sun, L., Xu, F., Gabelica, Z., et al. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01380g · Cited by 262
Diffusion in nanoporous materials: fundamental principles, insights and challenges
Kärger, J., & Ruthven, D. M. (2016) · New Journal of Chemistry · doi:10.1039/c5nj02836a · Cited by 253
Liao, P.-Q., Chen, X.-W., Liu, S.-Y., Li, X.-Y., Xu, Y.-T., Tang, M., Rui, Z., Ji, H., Zhang, J.-P., & Chen, X.-M. (2016) · Chemical Science · doi:10.1039/c6sc00836d · Cited by 253
Trace CO 2 capture by an ultramicroporous physisorbent with low water affinity
Mukherjee, S., Sikdar, N., O’Nolan, D., Franz, D. M., Gascón, V., Kumar, A., Kumar, N., Scott, H. S., Madden, D. G., Kruger, P. E., et al. (2019) · Science Advances · doi:10.1126/sciadv.aax9171 · Cited by 253
The Mechanism of Carbon Dioxide Adsorption in an Alkylamine-Functionalized Metal–Organic Framework
Planas, N., Dzubak, A. L., Poloni, R., Lin, L.-C., McManus, A., McDonald, T. M., Neaton, J. B., Long, J. R., Smit, B., & Gagliardi, L. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4004766 · Cited by 243
Cui, P., Ma, Y.-G., Li, H.-H., Zhao, B., Li, J.-R., Cheng, P., Balbuena, P. B., & Zhou, H.-C. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3063138 · Cited by 242
Soubeyrand-Lenoir, E., Vagner, C., Yoon, J. W., Bazin, P., Ragon, F., Hwang, Y. K., Serre, C., Chang, J.-S., & Llewellyn, P. L. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302787x · Cited by 234
Isosteric Heat of Adsorption: Theory and Experiment
Sircar, S., Mohr, R., Ristic, C., & Rao, M. B. (1999) · The Journal of Physical Chemistry B · doi:10.1021/jp9903817 · Cited by 233
CO2 capture via adsorption in amine-functionalized sorbents
Darunte, L. A., Walton, K. S., Sholl, D. S., & Jones, C. W. (2016) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2016.03.002 · Cited by 215
A sorbent-focused techno-economic analysis of direct air capture
Azarabadi, H., & Lackner, K. S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.04.012 · Cited by 215
Bioinspired Metal–Organic Framework for Trace CO2 Capture
Bien, C. E., Chen, K. K., Chien, S.-C., Reiner, B. R., Lin, L.-C., Wade, C. R., & Ho, W. S. W. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b06109 · Cited by 211
Jiao, Y., Morelock, C. R., Burtch, N. C., Mounfield, W. P., Hungerford, J. T., & Walton, K. S. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03843 · Cited by 208
Porous MOF with Highly Efficient Selectivity and Chemical Conversion for CO2
Wang, H.-H., Hou, L., Li, Y.-Z., Jiang, C.-Y., Wang, Y.-Y., & Zhu, Z. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03835 · Cited by 205
An air–liquid contactor for large-scale capture of CO2 from air
Holmes, G., & Keith, D. W. (2012) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2012.0137 · Cited by 197
Hu, Z., & Zhao, D. (2015) · Dalton Transactions · doi:10.1039/c5dt03359d · Cited by 197
A Tailor-Made Interpenetrated MOF with Exceptional Carbon-Capture Performance from Flue Gas
Liang, W., Bhatt, P. M., Shkurenko, A., Adil, K., Mouchaham, G., Aggarwal, H., Mallick, A., Jamal, A., Belmabkhout, Y., & Eddaoudi, M. (2019) · Chem · doi:10.1016/j.chempr.2019.02.007 · Cited by 193
Synthesis and post-synthetic modification of MIL-101(Cr)-NH2via a tandem diazotisation process
Jiang, D., Keenan, L. L., Burrows, A. D., & Edler, K. J. (2012) · Chemical Communications · doi:10.1039/c2cc36344e · Cited by 190
Preparation of Highly Moisture‐Resistant Black‐Colored Metal Organic Frameworks
Yang, S. J., & Park, C. R. (2012) · Advanced Materials · doi:10.1002/adma.201200790 · Cited by 190
Adsorption of Carbon Dioxide on Amine Modified SBA-15 in the Presence of Water Vapor
Hiyoshi, N., Yogo, K., & Yashima, T. (2004) · Chemistry Letters · doi:10.1246/cl.2004.510 · Cited by 189
CO2 capture by amine-functionalized nanoporous materials: A review
Chen, C., Kim, J., & Ahn, W.-S. (2014) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-014-0257-2 · Cited by 184
A Zeolite-Like Zinc Triazolate Framework with High Gas Adsorption and Separation Performance
Lin, R.-B., Chen, D., Lin, Y.-Y., Zhang, J.-P., & Chen, X.-M. (2012) · Inorganic Chemistry · doi:10.1021/ic301463z · Cited by 182
A single-ligand ultra-microporous MOF for precombustion CO 2 capture and hydrogen purification
Nandi, S., De Luna, P., Daff, T. D., Rother, J., Liu, M., Buchanan, W., Hawari, A. I., Woo, T. K., & Vaidhyanathan, R. (2015) · Science Advances · doi:10.1126/sciadv.1500421 · Cited by 182
Gadipelli, S., & Guo, Z. (2014) · Chemistry of Materials · doi:10.1021/cm502399q · Cited by 180
Elhenawy, S. E. M., Khraisheh, M., AlMomani, F., & Walker, G. (2020) · Catalysts · doi:10.3390/catal10111293 · Cited by 176
Siegelman, R. L., Milner, P. J., Forse, A. C., Lee, J.-H., Colwell, K. A., Neaton, J. B., Reimer, J. A., Weston, S. C., & Long, J. R. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b05567 · Cited by 175
Enhanced CO2 capture capacity of amine-functionalized MOF-177 metal organic framework
Gaikwad, S., Kim, Y., Gaikwad, R., & Han, S. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105523 · Cited by 174
A new post-synthetic polymerization strategy makes metal–organic frameworks more stable
Yang, S., Peng, L., Sun, D. T., Asgari, M., Oveisi, E., Trukhina, O., Bulut, S., Jamali, A., & Queen, W. L. (2019) · Chemical Science · doi:10.1039/c9sc00135b · Cited by 170
Park, H. J., & Suh, M. P. (2013) · Chem. Sci. · doi:10.1039/c2sc21253f · Cited by 166
MOF-74 type variants for CO2 capture
Choe, J. H., Kim, H., & Hong, C. S. (2021) · Materials Chemistry Frontiers · doi:10.1039/d1qm00205h · Cited by 165
Zhu, J., Wu, L., Bu, Z., Jie, S., & Li, B.-G. (2019) · ACS Omega · doi:10.1021/acsomega.8b02319 · Cited by 164
Metal–organic frameworks for applications in remediation of oxyanion/cation-contaminated water
Howarth, A. J., Liu, Y., Hupp, J. T., & Farha, O. K. (2015) · CrystEngComm · doi:10.1039/c5ce01428j · Cited by 160
Coudert, F.-X., Mellot-Draznieks, C., Fuchs, A. H., & Boutin, A. (2009) · Journal of the American Chemical Society · doi:10.1021/ja904123f · Cited by 158
Porous Metal–Organic Frameworks for Carbon Dioxide Adsorption and Separation at Low Pressure
Li, Z., Liu, P., Ou, C., & Dong, X. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c05155 · Cited by 157
Enhanced selective CO 2 adsorption on polyamine/MIL-101(Cr) composites
Lin, Y., Lin, H., Wang, H., Suo, Y., Li, B., Kong, C., & Chen, L. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta01174k · Cited by 156
Exceptional CO 2 working capacity in a heterodiamine-grafted metal–organic framework
Lee, W. R., Jo, H., Yang, L.-M., Lee, H., Ryu, D. W., Lim, K. S., Song, J. H., Min, D. Y., Han, S. S., Seo, J. G., et al. (2015) · Chemical Science · doi:10.1039/c5sc01191d · Cited by 153
Alkylamine‐Tethered Stable Metal–Organic Framework for CO2 Capture from Flue Gas
Hu, Y., Verdegaal, W. M., Yu, S., & Jiang, H. (2014) · ChemSusChem · doi:10.1002/cssc.201301163 · Cited by 152
Sun, Z., Liao, Y., Zhao, S., Zhang, X., Liu, Q., & Shi, X. (2022) · Journal of Materials Chemistry A · doi:10.1039/d1ta07856a · Cited by 149
Liu, K., Li, B., Li, Y., Li, X., Yang, F., Zeng, G., Peng, Y., Zhang, Z., Li, G., Shi, Z., et al. (2014) · Chemical Communications · doi:10.1039/c4cc00375f · Cited by 147
Assessment of reasonable opportunities for direct air capture
Wilcox, J. L., Psarras, P. C., & Liguori, S. (2017) · Environmental Research Letters · doi:10.1088/1748-9326/aa6de5 · Cited by 145
Mixed‐Metal MOF‐74 Templated Catalysts for Efficient Carbon Dioxide Capture and Methanation
Zurrer, T., Wong, K., Horlyck, J., Lovell, E. C., Wright, J., Bedford, N. M., Han, Z., Liang, K., Scott, J. A., & Amal, R. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007624 · Cited by 145
Kumar, A., Hua, C., Madden, D. G., O’Nolan, D., Chen, K., Keane, L.-A. J., Perry, J. J., & Zaworotko, M. J. (2017) · Chemical Communications · doi:10.1039/c7cc02289a · Cited by 144
Trace Carbon Dioxide Capture by Metal–Organic Frameworks
Liu, J., Wei, Y., & Zhao, Y. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b05590 · Cited by 141
Vaidhyanathan, R., Iremonger, S. S., Shimizu, G. K. H., Boyd, P. G., Alavi, S., & Woo, T. K. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201105109 · Cited by 135
Logan, M. W., Ayad, S., Adamson, J. D., Dilbeck, T., Hanson, K., & Uribe‐Romo, F. J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00437k · Cited by 135
Deria, P., Chung, Y. G., Snurr, R. Q., Hupp, J. T., & Farha, O. K. (2015) · Chemical Science · doi:10.1039/c5sc01784j · Cited by 133
CO 2 capture under humid conditions in metal–organic frameworks
González‐Zamora, E., & Ibarra, I. A. (2017) · Materials Chemistry Frontiers · doi:10.1039/c6qm00301j · Cited by 132
Stimulus‐Responsive Metal–Organic Frameworks
Nagarkar, S. S., Desai, A. V., & Ghosh, S. K. (2014) · Chemistry - An Asian Journal · doi:10.1002/asia.201402004 · Cited by 131
D’Amato, R., Donnadio, A., Carta, M., Sangregorio, C., Tiana, D., Vivani, R., Taddei, M., & Costantino, F. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03765 · Cited by 128
Flue-gas and direct-air capture of CO 2 by porous metal–organic materials
Madden, D. G., Scott, H. S., Kumar, A., Chen, K., Sanii, R., Bajpai, A., Lusi, M., Curtin, T., Perry, J. J., & Zaworotko, M. J. (2016) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2016.0025 · Cited by 127
Membrane Processes for Direct Carbon Dioxide Capture From Air: Possibilities and Limitations
Castel, C., Bounaceur, R., & Favre, É. (2021) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2021.668867 · Cited by 126
Milner, P. J., Martell, J. D., Siegelman, R. L., Gygi, D., Weston, S. C., & Long, J. R. (2017) · Chemical Science · doi:10.1039/c7sc04266c · Cited by 125
(2019) · Wiley eBooks · doi:10.1002/9783527818488 · Cited by 123
Jo, H., Lee, W. R., Kim, N. W., Jung, H. S., Lim, K. S., Kim, J. E., Kang, D. W., Lee, H., Hiremath, V., Seo, J. G., et al. (2016) · ChemSusChem · doi:10.1002/cssc.201601203 · Cited by 120
Li, H., Wang, K., Feng, D., Chen, Y., Verdegaal, W. M., & Zhou, H.-C. “. (2016) · ChemSusChem · doi:10.1002/cssc.201600768 · Cited by 119
A highly stable metal‐organic framework with optimum aperture size for CO2 capture
Hu, Z., Wang, Y., Farooq, S., & Zhao, D. (2017) · AIChE Journal · doi:10.1002/aic.15837 · Cited by 118
Monolith-Supported Amine-Functionalized Mg2(dobpdc) Adsorbents for CO2 Capture
Darunte, L. A., Terada, Y., Murdock, C. R., Walton, K. S., Sholl, D. S., & Jones, C. W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b02035 · Cited by 117
Xian, S., Wu, Y., Wu, J., Wang, X., & Xiao, J. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03517 · Cited by 116
Amine-Functionalized MIL-101 Monoliths for CO 2 Removal from Enclosed Environments
Lawson, S., Griffin, C., Rapp, K., Rownaghi, A. A., & Rezaei, F. (2019) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b04508 · Cited by 116
Maia, R. A., Louis, B., Gao, W., & Wang, Q. (2021) · Reaction Chemistry & Engineering · doi:10.1039/d1re00090j · Cited by 115
Jiang, M., Li, B., Cui, X., Yang, Q., Bao, Z., Yang, Y., Wu, H., Zhou, W., Chen, B., & Xing, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03358 · Cited by 114
A review of common practices in gravimetric and volumetric adsorption kinetic experiments
Wang, J., Mangano, E., Brandani, S., & Ruthven, D. M. (2020) · Adsorption · doi:10.1007/s10450-020-00276-7 · Cited by 113
Amine-Modified Mesoporous Silica for CO2 Adsorption: The Role of Structural Parameters
Kishor, R., & Ghoshal, A. K. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b00890 · Cited by 109
A Bio‐Metal–Organic Framework for Highly Selective CO2 Capture: A Molecular Simulation Study
Chen, Y., & Jiang, J. (2010) · ChemSusChem · doi:10.1002/cssc.201000080 · Cited by 108
Tang, H., Xu, Q., Wang, M., & Jiang, J. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c13786 · Cited by 108
Das, R., Ezhil, T., Palakkal, A. S., Muthukumar, D., Pillai, R. S., & Nagaraja, C. M. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta05138e · Cited by 105
Yeon, J. S., Lee, W. R., Kim, N. W., Jo, H., Lee, H., Song, J. H., Lim, K. S., Kang, D. W., Seo, J. G., Moon, D., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02357b · Cited by 104
CO2 Capture in Dry and Wet Conditions in UTSA-16 Metal–Organic Framework
Masala, A., Vitillo, J. G., Mondino, G., Grande, C. A., Blom, R., Manzoli, M., Marshall, M., & Bordiga, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13216 · Cited by 101
Carbon Dioxide Sensitivity of Zeolitic Imidazolate Frameworks
Mottillo, C., & Friščić, T. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201402082 · Cited by 96
Unusual Moisture-Enhanced CO 2 Capture within Microporous PCN-250 Frameworks
Chen, Y., Qiao, Z., Huang, J., Wu, H., Xiao, J., Xia, Q., Xi, H., Hu, J., Zhou, J. W., & Li, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b14400 · Cited by 96
Huang, X., Lu, J., Wang, W., Wei, X., & Ding, J. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.02.154 · Cited by 95
Cadot, S., Veyre, L., Luneau, D., Farrusseng, D., & Quadrelli, E. A. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03066d · Cited by 92
Song, C., Hu, J., Ling, Y., Feng, Y., Krishna, R., Chen, D.-L., & He, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05481h · Cited by 91
Cited by
Feizi-Afshar, B., Vafajoo, L., & Farzi, A. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2025.102921 · Cited by 4
Metadata
- Authors
- Mahajan, S., & Lahtinen, M.
- Venue
- Journal of Environmental Chemical Engineering
- Publisher
- Elsevier BV
- Published
- 2022-12
- Volume
- 10
- Issue
- 6
- Pages
- 108930
- ISSN
- 2213-2929 (ISSN-L)
- 2213-3437
- OpenAlex
- W4308308365
- Cited by
- 282
- References
- 269
- FWCI
- 16.90
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.