CoChat
Sign Up
Cited by 78

The DOI matches its Crossref record.

The application of textile sludge adsorbents for the removal of Reactive Red 2 dye

Sonai, Gabriela G., de Souza, Selene M.A. Guelli U., de Oliveira, Débora, de Souza, Antônio Augusto U.·2016·Journal of Environmental Management
DOI 10.1016/j.jenvman.2015.12.003
Open this paper in CoChat — free account

Abstract

Sludge from the textile industry was used as a low-cost adsorbent to remove the dye Reactive Red 2 from an aqueous solution. Adsorbents were prepared through the thermal and chemical treatment of sludge originating from physical-chemical (PC) and biological (BIO) effluent treatment processes. The adsorbent characterization was carried out through physical-chemical analysis, X-ray fluorescence (XRF) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, pHPZC determination, Boehm titration method, Brunauer-Emmett-Teller (BET) surface area analysis and scanning electron microscopy (SEM). Batch kinetic experiments and adsorption isotherm modeling were conducted under different pH and temperature conditions. The results for the kinetic studies indicate that the adsorption processes associated with these systems can be described by a pseudo-second-order model and for the equilibrium data the Langmuir model provided the best fit. The adsorption was strongly dependent on the pH but not on the temperature within the ranges studied. The maxima adsorption capacities were 159.3 mg g(-1) for the BIO adsorbent and 213.9 mg g(-1) for PC adsorbent at pH of 2 and 25 °C.

Overview

Integrity signals

Registry

Crossref · 10.1016/j.jenvman.2015.12.003

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 47

  1. Aksu, 2010, Comparison of remazol black B biosorptive properties of live and treated activated sludge, Chem. Eng. J., 165, 184, 10.1016/j.cej.2010.09.014 · DOI
  2. Aldegs, 2008, Effect of solution pH, ionic strength, and temperature on adsorption behavior of reactive dyes on activated carbon, Dyes Pigments, 77, 16, 10.1016/j.dyepig.2007.03.001 · DOI
  3. Allen, 2004, Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems, J. Coll. Int. Sci., 280, 322, 10.1016/j.jcis.2004.08.078 · DOI
  4. Annadurai, 2003, Use of thermally treated waste biological sludge as dye absorbent, Adv. Environ. Res., 7, 739, 10.1016/S1093-0191(02)00044-8 · DOI
  5. Babic, 1999, Point of zero charge and intrinsic equilibrium constants of activated carbon cloth, Carbon, 37, 477, 10.1016/S0008-6223(98)00216-4 · DOI
  6. Babu, 2011, Equilibrium and kinetic studies of reactive Red 2 dye adsorption onto prepared activated carbons, J. Chem. Pharmac. Res., 3, 428
  7. Bailey, 1999, A review of potentially low-cost sorbents for heavy metals, Water Res., 33, 2469, 10.1016/S0043-1354(98)00475-8 · DOI
  8. Bhatnagar, 2005, A comparative adsorption study with different industrial wastes as adsorbents for the removal of cationic dyes from water, J. Coll. Int. Sci., 281, 49, 10.1016/j.jcis.2004.08.076 · DOI · Paper page
  9. Bhattacharyya, 2009, Azadirachta indica leaf powder as a biosorbent for Ni(II) in aqueous medium, J. Hazard. Mat., 165, 271, 10.1016/j.jhazmat.2008.09.109 · DOI
  10. Boehm, 1994, Some aspects of the surface chemistry of carbon blacks and other carbons, Carbon, 32, 759, 10.1016/0008-6223(94)90031-0 · DOI
  11. Carneiro, 2010, Assessment of water contamination caused by a mutagenic textile effluent/dyehouse effluent bearing disperse dyes, J. Hazard. Mat., 174, 694, 10.1016/j.jhazmat.2009.09.106 · DOI
  12. Chang, 2004, Adsorption of tannic acid, humic acid, and dyes from water using the composite of chitosan and activated clay, J. Coll. Int. Sci., 278, 18, 10.1016/j.jcis.2004.05.029 · DOI
  13. Crini, 2006, Non-conventional low-cost adsorbents for dye removal: a review, Biores. Technol., 97, 1061, 10.1016/j.biortech.2005.05.001 · DOI · Paper page
  14. Doke, 2013, Adsorption thermodynamics to clean up wastewater; critical review, Rev. Environ. Sci. Bio. Technol, 12, 25, 10.1007/s11157-012-9273-z · DOI
  15. Dural, 2011, Methylene blue adsorption on activated carbon prepared from Posidonia oceanica (L.) dead leaves: kinetics and equilibrium studies, Chem. Eng. J., 168, 77, 10.1016/j.cej.2010.12.038 · DOI
  16. Fernández, 2010, An analytical overview of processes for removing organic dyes from wastewater effluents, Trends Anal. Chem., 29, 1202, 10.1016/j.trac.2010.07.011 · DOI
  17. Fonts, 2009, Study of the pyrolysis liquids obtained from different sewage sludge, J. Anal. Appl. Pyrolysis, 85, 184, 10.1016/j.jaap.2008.11.003 · DOI
  18. Fonts, 2012, Sewage sludge pyrolysis for liquid production: a review, Renew. Sustain. Energy Rev., 16, 2781, 10.1016/j.rser.2012.02.070 · DOI
  19. Freundlich, 1907, Üeber die adsorption in löesungen, J. Phys. Chem., 57, 385
  20. Gasco, 2007, The effect of acid treatment on the pyrolysis behavior of sewage sludges, J. Anal. Appl. Pyrolysis, 80, 496, 10.1016/j.jaap.2007.03.009 · DOI
  21. Geethakarthi, 2011, Adsorption of reactive dyes from aqueous solutions by tannery sludge developed activated carbon: kinetic and equilibrium studies, Int. J. Environ. Sci. Technol., 8, 561, 10.1007/BF03326242 · DOI
  22. Gupta, 2003, Equilibrium uptake and sorption dynamics for the removal of a basic dye (basic red) using low-cost adsorbents, J. Coll. Int. Sci., 265, 257, 10.1016/S0021-9797(03)00467-3 · DOI
  23. Gupta, 2009, Application of low-cost adsorbents for dye removal- a review, J. Environ. Manag., 90, 2313
  24. Ho, 1998, Sorption of dye from aqueous solution by peat, Chem. Eng. J., 70, 115, 10.1016/S0923-0467(98)00076-1 · DOI
  25. Ho, 2003, Sorption of dyes and copper ions onto biosorbents, Process Biochem., 38, 1047, 10.1016/S0032-9592(02)00239-X · DOI
  26. Inguanzo, 2001, Reactivity of pyrolyzed sewage sludge in air and CO2, J. Anal. Appl. Pyrolysis, 58–59, 943, 10.1016/S0165-2370(00)00143-1 · DOI
  27. Jain, 2003, Utilization of industrial waste products as adsorbents for the removal of dyes, J. Hazard. Mat., 101, 31, 10.1016/S0304-3894(03)00146-8 · DOI
  28. Khursheed, 2011, Retrospective of ecological approaches to excess sludge reduction, Water Res., 45, 4287, 10.1016/j.watres.2011.05.018 · DOI
  29. Lagergren, 1898, About the theory of so-called adsorption of soluble substances, K. Sven. Vetensk., 24, 1
  30. Langmuir, 1918, The adsorption of gases on plane surfaces of glass, mica and platinum, J. Am. Chem. Soc., 40, 1361, 10.1021/ja02242a004 · DOI · Paper page
  31. Mckay, 1987, Desorption and regeneration of dye colours from low-cost materials, Water Res., 21, 375, 10.1016/0043-1354(87)90218-1 · DOI
  32. Méndez, 2005, Preparation of carbon-based adsorbents from pyrolysis and air activation of sewage sludges, Chem. Eng. J., 108, 169, 10.1016/j.cej.2005.01.015 · DOI
  33. Milonjic, 2007, A consideration of the correct calculation of thermodynamic parameters of adsorption, J. Serbian Chem. Soc., 72, 1363, 10.2298/JSC0712363M · DOI
  34. Mittal, 2010, Decoloration treatment of a hazardous triarylmethane dye, Light Green SF (Yellowish) by waste material adsorbents, J. Coll. Int. Sci., 342, 518, 10.1016/j.jcis.2009.10.046 · DOI · Paper page
  35. Netpradit, 2003, Application of “waste” metal hydroxide sludge for adsorption of azo reactive dyes, Water Res., 37, 763, 10.1016/S0043-1354(02)00375-5 · DOI
  36. Netpradit, 2004, Adsorption of three azo reactive dyes by metal hydroxide sludge: effect of temperature, pH, and electrolytes, J. Coll. Int. Sci., 270, 255, 10.1016/j.jcis.2003.08.073 · DOI
  37. Oliveira, 2007, Chemical characterization of a dye processing plant effluent-identification of the mutagenic components, Mutat. Res., 626, 135, 10.1016/j.mrgentox.2006.09.008 · DOI
  38. Ponnusami, 2009, Studies on application of teak leaf powders for the removal of color from synthetic and industrial effluents, J. Hazard. Mat., 169, 1159, 10.1016/j.jhazmat.2009.03.142 · DOI
  39. Prado, 2004, Comparative adsorption studies of indigo carmine dye on chitin and chitosan, J. Coll. Int. Sci., 277, 43, 10.1016/j.jcis.2004.04.056 · DOI
  40. Santos, 2008, Waste metal hydroxide sludge as adsorbent for a reactive dye, J. Hazard. Mat., 153, 999, 10.1016/j.jhazmat.2007.09.050 · DOI
  41. Smith, 2009, Sewage sludge-based adsorbents: a review of their production, properties and use in water treatment applications, Water Res., 43, 2569, 10.1016/j.watres.2009.02.038 · DOI
  42. Srinivasan, 2010, Decolorization of dye wastewaters by biosorbents: a review, J. Environ. Manag., 91, 1915
  43. Vasques, 2009, Application of ecological adsorbent in the removal of reactive dyes from textile effluents, J. Chem. Technol. Biotechnol., 84, 1146, 10.1002/jctb.2147 · DOI
  44. Vijayaraghavan, 2008, Biosorption of C.I. Reactive Black 5 from aqueous solution using acid-treated biomass of brown seaweed Laminaria sp, Dyes Pigments, 76, 726, 10.1016/j.dyepig.2007.01.013 · DOI
  45. Vijayaraghavan, 2009, Treatment of complex, J. Hazard. Mat., 167, 790, 10.1016/j.jhazmat.2009.01.055 · DOI
  46. Werther, 1999, Sewage sludge combustion, Prog. Energy Combust. Sci., 25, 55, 10.1016/S0360-1285(98)00020-3 · DOI
  47. Zhang, 2011, Mechanism of wet sewage sludge pyrolysis in a tubular furnace, Int. J. Hydrogen Energy, 36, 355, 10.1016/j.ijhydene.2010.05.100 · DOI

Cited by

Sorted by citations

Metadata

Authors
Sonai, G. G., de Souza, S. M. A. G. U., de Oliveira, D., & de Souza, A. A. U.
Venue
Journal of Environmental Management
Publisher
Elsevier BV
Published
2016-03
Volume
168
Pages
149-156
ISSN
0301-4797
DOI
10.1016/j.jenvman.2015.12.003
Cited by
78
References
0
Language
en
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Funders
CNPq – National Counsel of Technological and Scientific Development, Brazil

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review