Porous carbons derived from polyethylene terephthalate (PET) waste for CO2 capture studies
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Oxygen augmented carbon adsorbent has been developed using polyethylene terephthalate (PET) waste by first carbonizing at different temperatures (500-800 °C) and then chemically activating using different ratios of KOH: PET (mass ratio 1 to 4). The textural characterization divulges the effect of activation in terms of the development of the high surface area and micropore volume of 1690 m2 g-1 and 0.78 cm3 g-1 respectively, for the optimum sample (PET-3-700). Elemental analysis of PET-3-700 illustrates the presence of 34.33% oxygen and XPS results confirmed the occurrence of oxygen moieties which enhance the basicity of the adsorbent and promote CO2 capture. The CO2 adsorption capacity of prepared carbons was determined thermogravimetrically under dynamic conditions, at different concentrations of CO2 (6-100%) and temperatures. The maximum CO2 uptake capacity of 2.31 mmol g-1 was exhibited by PET-3-700 at an adsorption temperature of 30 °C under 100% pure CO2 flow. Four adsorption-desorption cycles corroborate almost complete regenerability of the prepared adsorbent. Adsorption kinetics at all adsorption conditions was described best by fractional order kinetic model. Freundlich isotherm fit indicates the surface of adsorbent being heterogeneous and low values of isosteric heat shows physisorption behavior of the process. Negative values of thermodynamic parameters indicate exothermic and feasible nature of adsorption process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Advances in principal factors influencing carbon dioxide adsorption on zeolites
Bonenfant, D., Kharoune, M., Niquette, P., Mimeault, M., & Hausler, R. (2008) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/9/1/013007 · Cited by 351
Activated carbons prepared from peanut shell and sunflower seed shell for high CO2 adsorption
Deng, S., Hu, B., Chen, T., Wang, B., Huang, J., Wang, Y., & Yu, G. (2015) · Adsorption · doi:10.1007/s10450-015-9655-y · Cited by 159
Development of adsorbents for CO2 capture from waste materials: a review
Olivares‐Marín, M., & Maroto‐Valer, M. M. (2012) · Greenhouse Gases: Science and Technology · doi:10.1002/ghg.45 · Cited by 142
Adibfar, M., Kaghazchi, T., Asasian, N., & Soleimani, M. (2014) · Chemical Engineering & Technology · doi:10.1002/ceat.201200719 · Cited by 105
Esfandiari, A., Kaghazchi, T., & Soleimani, M. (2012) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2012.02.002 · Cited by 98
Song, C., Hu, J., Ling, Y., Feng, Y., Krishna, R., Chen, D.-L., & He, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05481h · Cited by 91
Shen, F., Wang, Y., Li, L., Zhang, K., Smith, R. L., & Qi, X. (2018) · Chemical Engineering Communications · doi:10.1080/00986445.2017.1367671 · Cited by 65
Cited by
Yuan, X., Lee, J. G., Yun, H., Deng, S., Kim, Y. J., Lee, J. E., Kwak, S. K., & Lee, K. B. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125350 · Cited by 194
Yuan, X., Li, S., Jeon, S., Deng, S., Zhao, L., & Lee, K. B. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123010 · Cited by 162
Upcycling plastic waste to carbon materials for electrochemical energy storage and conversion
Jiang, M., Wang, X., Xi, W., Zhou, H., Yang, P., Yao, J., Jiang, X., & Wu, D. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141962 · Cited by 112
Plastic wastes derived carbon materials for green energy and sustainable environmental applications
Chen, Z., Wei, W., Ni, B.-J., & Chen, H. (2022) · Environmental Functional Materials · doi:10.1016/j.efmat.2022.05.005 · Cited by 113
Upcycling of waste polyethylene terephthalate plastic bottles into porous carbon for CF4 adsorption
Yuan, X., Cho, M.-K., Lee, J. G., Choi, S. W., & Lee, K. B. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.114868 · Cited by 101
Metadata
- Authors
- Kaur, B., Singh, J., Gupta, R. K., & Bhunia, H.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 242
- Pages
- 68-80
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W2941293589
- Cited by
- 116
- References
- 9
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.