The DOI matches its Crossref record; 58 of the 58 references it cites were found in a registry or an index.
Adsorption of arsenic using chitosan magnetic graphene oxide nanocomposite
Abstract
Chitosan-magnetic-graphene oxide (CMGO) nanocomposite was prepared for arsenic adsorption. The nanocomposite was characterized through BET, FTIR, FESEM, EDX, and VSM analyses. These characterizations confirmed the formation of CMGO nanocomposites with high specific surface area (152.38 m2/g) and excellent saturation magnetization (49.30 emu/g). Batch adsorption experiments were conducted to evaluate the performance of the nanocomposite in the adsorption of arsenic from aqueous solution. The effects of operational parameters, adsorption kinetic, equilibrium isotherm and thermodynamics were evaluated. The removal efficiency of arsenic increased with increasing adsorbent dosage and contact time. However, the effect of pH followed a different pattern, with the removal efficiency increasing from acidic to neutral pH, and then decreasing at alkaline conditions. The highest adsorption capacity (45 mg/g) and removal efficiency (61%) were obtained at pH 7.3. The adsorption kinetic followed a pseudo-second-order kinetic model. The analysis of adsorption isotherm shows that the adsorption data fitted well to Langmuir isotherm model, indicating a homogeneous process. Thermodynamic analysis shows that the adsorption of As(III) is exothermic and spontaneous. The superparamagnetic properties of the nanocomposite enabled the separation and recovery of the nanoparticles using an external magnetic field. Thus, the developed nanocomposite has a potential for arsenic remediation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of second-order models for adsorption systems
HO, Y. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.12.043 · Cited by 4,120
Water-Dispersible Magnetite-Reduced Graphene Oxide Composites for Arsenic Removal
Chandra, V., Park, J., Chun, Y., Lee, J. W., Hwang, I.-C., & Kim, K. S. (2010) · ACS Nano · doi:10.1021/nn1008897 · Cited by 1,997
Arsenic toxicity and potential mechanisms of action
Hughes, M. F. (2002) · Toxicology Letters · doi:10.1016/s0378-4274(02)00084-x · Cited by 1,671
Acik, M., Lee, G., Mattevi, C., Pirkle, A., Wallace, R. M., Chhowalla, M., Cho, K., & Chabal, Y. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2052618 · Cited by 961
Equilibrium, kinetics and thermodynamic studies for adsorption of As(III) on activated alumina
Singh, T. S., & Pant, K. K. (2004) · Separation and Purification Technology · doi:10.1016/s1383-5866(03)00209-0 · Cited by 563
The global menace of arsenic and its conventional remediation - A critical review
Sarkar, A., & Paul, B. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.05.043 · Cited by 537
Jain, A., Raven, K. P., & Loeppert, R. H. (1999) · Environmental Science & Technology · doi:10.1021/es980722e · Cited by 533
Removal of arsenic (III) and arsenic (V) from aqueous medium using chitosan-coated biosorbent
Boddu, V. M., Abburi, K., Talbott, J. L., Smith, E. D., & Haasch, R. (2008) · Water Research · doi:10.1016/j.watres.2007.08.014 · Cited by 504
Relevance of isotherm models in biosorption of pollutants by agricultural byproducts
Rangabhashiyam, S., Anu, N., Giri Nandagopal, M. S., & Selvaraju, N. (2014) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2014.01.014 · Cited by 478
Adsorption of rare earth metals: A review of recent literature
Anastopoulos, I., Bhatnagar, A., & Lima, E. C. (2016) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.06.076 · Cited by 424
Cited by
Isotherm models for adsorption of heavy metals from water - a review
Chen, X., Hossain, M. F., Duan, C., Lu, J., Tsang, Y. F., Islam, M. S., & Zhou, Y. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.135545 · Cited by 623
Removal of heavy metals from aqueous solution using carbon-based adsorbents: A review
Duan, C., Ma, T., Wang, J., & Zhou, Y. (2020) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2020.101339 · Cited by 533
da Silva Alves, D. C., Healy, B., Pinto, L. A. D. A., Cadaval, T. R. S., & Breslin, C. B. (2021) · Molecules · doi:10.3390/molecules26030594 · Cited by 381
Hoang, A. T., Nižetić, S., Cheng, C. K., Luque, R., Thomas, S., Banh, T. L., Pham, V. V., & Nguyen, X. P. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131959 · Cited by 277
Nanomaterials usage as adsorbents for the pollutants removal from wastewater; a review
Naser, J. A., Ahmed, Z. W., & Ali, E. H. (2021) · Materials Today: Proceedings · doi:10.1016/j.matpr.2020.12.584 · Cited by 31
Metadata
- Authors
- Sherlala, A. I. A., Raman, A. A. A., Bello, M. M., & Buthiyappan, A.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 246
- Pages
- 547-556
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W2949992105
- Cited by
- 350
- References
- 58
- FWCI
- 16.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adsorption of arsenic using chitosan magnetic graphene oxide nanocomposite. https://app.cochat.ai/papers/10.1016/j.jenvman.2019.05.117
- The paper
- Sherlala, A. I. A., Raman, A. A. A., Bello, M. M., & Buthiyappan, A. (2019). Adsorption of arsenic using chitosan magnetic graphene oxide nanocomposite. Journal of Environmental Management. https://doi.org/10.1016/j.jenvman.2019.05.117
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.