The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Reviewing the thermo-chemical recycling of waste polyurethane foam
Open accessAbstract
The worldwide production of polymeric foam materials is growing due to their advantageous properties of light weight, high thermal insulation, good strength, resistance and rigidity. Society creates ever increasing amounts of poly-urethane (PU) waste. A major part of this waste can be recycled or recovered in order to be put into further use. The PU industry is committed to assist and play its part in the process. The recycling and recovery of PU foam cover a range of mechanical, physical, chemical and thermo-chemical processes. In addition to the well-documented mechanical and chemical processing options, thermo-chemical treatments are important either as ultimate disposal (incineration) or towards feedstock recovery, leading to different products according to the thermal conditions of the treatment. The review focuses on these thermo-chemical and thermal processes. As far as pyrolysis is concerned, TDI and mostly polyol can be recovered. The highest recovery yields of TDI and polyols occur at low temperatures (150-200 °C). It is however clear from literature that pure feedstock will not be produced, and that a further upgrading of the condensate will be needed, together with a thermal or alternative treatment of the non-condensables. Gasification towards syngas has been studied on a larger and industrial scale. Its application would need the location of the PU treatment plant close to a chemical plant, if the syngas is to be valorized or considered in conjunction with a gas-fired CHP plant. Incineration has been studied mostly in a co-firing scheme. Potentially toxic emissions from PU combustion can be catered for by the common flue gas cleaning behind the incineration itself, making this solution less evident as a stand-alone option: the combination with other wastes (such as municipal solid waste) in MSWI's seems the indicated route to go.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemical modification of lignins: Towards biobased polymers
Laurichesse, S., & Avérous, L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.11.004 · Cited by 2,058
Microbial Degradation and Valorization of Plastic Wastes
Ru, J., Huo, Y., & Yang, Y. (2020) · Frontiers in Microbiology · doi:10.3389/fmicb.2020.00442 · Cited by 609
Cited by
Yang, X., Ullah, Z., Stoddart, J. F., & Yavuz, C. T. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00667 · Cited by 458
Polyurethane foam materials and their industrial applications
Ates, M., Karadag, S., Eker, A. A., & Eker, B. (2022) · Polymer International · doi:10.1002/pi.6441 · Cited by 265
Recent Advances in Development of Waste-Based Polymer Materials: A Review
Formela, K., Kurańska, M., & Barczewski, M. (2022) · Polymers · doi:10.3390/polym14051050 · Cited by 70
Lechuga-Islas, V. D., Bourguignon, M., Anas, M., Müller, A. J., Grignard, B., & Detrembleur, C. (2026) · Chem · doi:10.1016/j.chempr.2026.103145
Metadata
- Authors
- Deng, Y., Dewil, R., Appels, L., Ansart, R., Baeyens, J., & Kang, Q.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 278
- Issue
- Pt 1
- Pages
- 111527
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W3094885990
- Cited by
- 208
- References
- 2
- FWCI
- 12.01
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reviewing the thermo-chemical recycling of waste polyurethane foam. https://app.cochat.ai/papers/10.1016/j.jenvman.2020.111527
- The paper
- Deng, Y., Dewil, R., Appels, L., Ansart, R., Baeyens, J., & Kang, Q. (2021). Reviewing the thermo-chemical recycling of waste polyurethane foam. Journal of Environmental Management. https://doi.org/10.1016/j.jenvman.2020.111527
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.