The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world
Open accessAbstract
Natural fiber reinforced polymer composites have emerged as a potential environmentally friendly and cost-effective alternative to synthetic fiber reinforced composites. Therefore, in the past decade, a number of major industries, such as the automotive, construction and packaging industries, have shown a considerable interest in the progress of new natural fiber reinforced composite materials. The availability of natural fibers and the ease of manufacturing have tempted researchers to study their feasibility of their application as reinforcement and the extent to which they satisfy the required specifications in tribological applications. However, less information concerning the tribological performance of natural fiber reinforced composite material is available in the literature. Hence, the aim of this bibliographic review is to demonstrate the tribological behavior of natural fiber reinforced composites and find a knowledge about their usability for various applications that tribology plays a dominant role. This review presents the reported work on natural fiber reinforced composites with special reference to the type of fibers, matrix polymers, treatment of fibers and test parameters. The results show that composites reinforced with natural fibers have an improvement in tribological properties and their properties are comparable with conventional fibers. In addition, fiber treatment and fiber orientation are two important factors can affect tribological properties where treated fibers and normal oriented fibers exhibit better friction and wear behavior. This review is trying to evaluate the effect of test parameter including normal load and sliding speed on tribological properties, and the results vary based on type of reinforcement. Generally, due to their positive economic and environmental aspects, as well as their good tribological properties, natural composites are showing a good potential for employing in several applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
Mohammed, L., Ansari, M. N. M., Pua, G., Jawaid, M., & Islam, M. S. (2015) · International Journal of Polymer Science · doi:10.1155/2015/243947 · Cited by 1,657
Green composites from sustainable cellulose nanofibrils: A review
Abdul Khalil, H. P. S., Bhat, A. H., & Ireana Yusra, A. F. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.078 · Cited by 1,573
A review on the degradability of polymeric composites based on natural fibres
Azwa, Z. N., Yousif, B. F., Manalo, A. C., & Karunasena, W. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.11.025 · Cited by 1,530
Critical review of recent publications on use of natural composites in infrastructure
Dittenber, D. B., & GangaRao, H. V. S. (2012) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.11.019 · Cited by 1,515
John, M. J., & Anandjiwala, R. D. (2008) · Polymer Composites · doi:10.1002/pc.20461 · Cited by 1,291
Green composites: A review of adequate materials for automotive applications
Koronis, G., Silva, A., & Fontul, M. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.07.004 · Cited by 1,198
A short review on basalt fiber reinforced polymer composites
Dhand, V., Mittal, G., Rhee, K. Y., Park, S.-J., & Hui, D. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.12.011 · Cited by 1,080
Rong, M. Z., Zhang, M. Q., Liu, Y., Yang, G. C., & Zeng, H. M. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00046-x · Cited by 1,047
Processing and characterization of natural cellulose fibers/thermoset polymer composites
Thakur, V. K., & Thakur, M. K. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.039 · Cited by 990
Dorri Moghadam, A., Omrani, E., Menezes, P. L., & Rohatgi, P. K. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.03.014 · Cited by 906
Self-citationReview: Raw Natural Fiber–Based Polymer Composites
Thakur, V. K., Thakur, M. K., & Gupta, R. K. (2014) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2014.880016 · Cited by 750
A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683
Ahmad, F., Choi, H. S., & Park, M. K. (2015) · Macromolecular Materials and Engineering · doi:10.1002/mame.201400089 · Cited by 672
Ecodesign of automotive components making use of natural jute fiber composites
Alves, C., Ferrão, P. M. C., Silva, A. J., Reis, L. G., Freitas, M., Rodrigues, L. B., & Alves, D. E. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.10.022 · Cited by 644
HUDA, M., DRZAL, L., MOHANTY, A., & MISRA, M. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.10.015 · Cited by 489
Properties and performance of natural-fibre composites
Pickering, K. L. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845694593 · Cited by 484
Goriparthi, B. K., Suman, K. N. S., & Rao, N. M. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.05.007 · Cited by 400
Development of flax/carbon fibre hybrid composites for enhanced properties
Dhakal, H. N., Zhang, Z., Guthrie, R. I. L., MacMullen, J., & Bennett, N. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.03.074 · Cited by 338
Liu, L., Yu, J., Cheng, L., & Qu, W. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.03.002 · Cited by 335
Arrakhiz, F. Z., El Achaby, M., Malha, M., Bensalah, M. O., Fassi-Fehri, O., Bouhfid, R., Benmoussa, K., & Qaiss, A. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.06.056 · Cited by 315
Potential of kenaf fibres as reinforcement for tribological applications
Chin, C. W., & Yousif, B. F. (2009) · Wear · doi:10.1016/j.wear.2009.06.002 · Cited by 288
Luo, S., & Netravali, A. N. (1999) · Polymer Composites · doi:10.1002/pc.10363 · Cited by 283
Polymeric Nanocomposites for Tribological Applications
Burris, D. L., Boesl, B., Bourne, G. R., & Sawyer, W. G. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600416 · Cited by 269
State-of-the-art of polymer tribology
Zhang, S. W. (1998) · Tribology International · doi:10.1016/s0301-679x(98)00007-3 · Cited by 225
The potential of using date palm fibres as reinforcement for polymeric composites
Alsaeed, T., Yousif, B. F., & Ku, H. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.06.061 · Cited by 188
Omrani, E., Moghadam, A. D., Menezes, P. L., & Rohatgi, P. K. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7528-x · Cited by 182
Self-citationNatural fibres: types and properties
Rowell, R. M. (2008) · Elsevier eBooks · doi:10.1533/9781845694593.1.3 · Cited by 139
Dubrovski, P. D. (2010) · Sciyo eBooks · doi:10.5772/295 · Cited by 130
Renewable Resource-Based Green Polymer Composites: Analysis and Characterization
Thakur, V. K., Singha, A. S., & Mehta, I. K. (2010) · International Journal of Polymer Analysis and Characterization · doi:10.1080/10236660903582233 · Cited by 108
Barari, B., Ellingham, T., Qamhia, I. I. A., Pillai, K. M., Elhajjar, R. F., Turng, L., & Sabo, R. C. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.08.040 · Cited by 92
Roumeli, E., Terzopoulou, Z. N., Pavlidou, E., Chrissafis, K., Papadopoulou, E., Athanassiadou, E., Triantafyllidis, K., & Bikiaris, D. Ν. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4596-y · Cited by 91
Riccieri, J. E., Vázquez, A., & de Carvalho, L. H. (1999) · Polymer Composites · doi:10.1002/pc.10332 · Cited by 77
Tensile Strength of Banana Fiber Reinforced Epoxy Composites Materials
Irawan, A. P., & Sukania, I. W. (2015) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.776.260 · Cited by 39
Ishikawa, H., Takagi, H., Nakagaito, A. N., Yasuzawa, M., Genta, H., & Saito, H. (2014) · Composite Interfaces · doi:10.1080/15685543.2013.876322 · Cited by 30
Laniado-Jácome, E. (2012) · Journal of Mechanical Engineering and Automation · doi:10.5923/j.jmea.20110101.01 · Cited by 22
Cited by
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Self-citationCharacterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
Applications of Natural Fibers and Its Composites: An Overview
Sanjay, M. R., Arpitha, G. R., Naik, L. L., Gopalakrishna, K., & Yogesha, B. (2016) · Natural Resources · doi:10.4236/nr.2016.73011 · Cited by 550
Sustainable Fiber‐Reinforced Composites: A Review
Maiti, S., Islam, M. R., Uddin, M. A., Afroj, S., Eichhorn, S. J., & Karim, N. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200258 · Cited by 493
Metadata
- Authors
- Omrani, E., Menezes, P. L., & Rohatgi, P. K.
- Venue
- Engineering Science and Technology, an International Journal
- Publisher
- Elsevier BV
- Published
- 2016-06
- Volume
- 19
- Issue
- 2
- Pages
- 717-736
- ISSN
- 2215-0986 (ISSN-L)
- OpenAlex
- W2218782192
- Cited by
- 353
- References
- 40
- FWCI
- 14.17
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.