The DOI matches its Crossref record.
High entropy carbide ceramics from different starting materials
Abstract
Abstract Three typical ceramic processing were respectively used to synthesize (Ti0.2Zr0.2Nb0.2Ta0.2W0.2)C high-entropy carbide (HEC) ceramics by spark plasma sintering. Although single-phase composition characterized by X-ray diffraction were obtained by the three processes, the microstructures and elemental distributions are different. The reasons for the formation of these features are preliminarily discussed. The results demonstrate that the particle sizes of the starting metallic powders was a key factor for obtaining a homogeneous distribution of each elements in the HEC. Carbide process with relatively finer starting carbide powders compared to the above metallic starting powders resulted in an HEC with homogeneous distribution of elements, but the obtained ceramics showed the lowest relative density. For oxide process, it is considered that the obviously higher reaction temperature between ZrO2 and graphite resulted in a two-phase structure of an HEC and a zirconium-rich phase, but the obtained HEC showed the highest relative density.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Advances in ultra-high temperature ceramics, composites, and coatings
Ni, D., Cheng, Y., Zhang, J., Liu, J.-X., Zou, J., Chen, B., Wu, H., Li, H., Dong, S., Han, J., et al. (2022) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0550-6 · Cited by 789
Self-citationHigh-Entropy 2D Carbide MXenes: TiVNbMoC 3 and TiVCrMoC 3
Nemani, S. K., Zhang, B., Wyatt, B. C., Hood, Z. D., Manna, S., Khaledialidusti, R., Hong, W., Sternberg, M. G., Sankaranarayanan, S. K. R. S., & Anasori, B. (2021) · ACS Nano · doi:10.1021/acsnano.1c02775 · Cited by 423
High-entropy silicide superconductors with W5Si3 -type structure
Liu, B., Yang, W., Xiao, G., Zhu, Q., Song, S., Cao, G.-H., & Ren, Z. (2023) · Physical Review Materials · doi:10.1103/physrevmaterials.7.014805 · Cited by 24
Metadata
- Authors
- Wei, X.-F., Liu, J.-X., Li, F., Qin, Y., Liang, Y.-C., & Zhang, G.-J.
- Venue
- Journal of the European Ceramic Society
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 39
- Issue
- 10
- Pages
- 2989-2994
- ISSN
- 0955-2219 (ISSN-L)
- OpenAlex
- W2930146320
- Cited by
- 224
- References
- 0
- FWCI
- 15.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High entropy carbide ceramics from different starting materials. https://app.cochat.ai/papers/10.1016/j.jeurceramsoc.2019.04.006
- The paper
- Wei, X.-F., Liu, J.-X., Li, F., Qin, Y., Liang, Y.-C., & Zhang, G.-J. (2019). High entropy carbide ceramics from different starting materials. Journal of the European Ceramic Society. https://doi.org/10.1016/j.jeurceramsoc.2019.04.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.