The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Preparation and characterization of activated carbon from waste biomass
Abstract
Lignocellulosic materials are good and cheap precursors for the production of activated carbon. In this study, activated carbons were prepared from the pyrolysis of soybean oil cake at 600 and 800 degrees C by chemical activation with K(2)CO(3) and KOH. The influence of temperature and type of chemical reagents on the porosity development was investigated and discussed. K(2)CO(3) was found more effective than KOH as a chemical reagent under identical conditions in terms of both porosity development and yields of the activated carbons. The maximum surface area (1352.86 m(2)g(-1)) was obtained at 800 degrees C with K(2)CO(3) activation which lies in the range of commercial activated carbons. Elemental analyses of the activated carbons indicate insignificant sulphur content for all activated carbons. The ash and sulphur contents of the activated carbons obtained with chemical activation by K(2)CO(3) were lower than those by chemical activation with KOH.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Agricultural residues as precursors for activated carbon production—A review
Ioannidou, O., & Zabaniotou, A. A. (2006) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.03.013 · Cited by 1,534
Activated carbons from yellow poplar and white oak by H3PO4 activation
Jagtoyen, M., & Derbyshire, F. J. (1998) · Carbon · doi:10.1016/s0008-6223(98)00082-7 · Cited by 701
Activated carbons from lignocellulosic materials by chemical and/or physical activation: an overview
Rodríguez-Reinoso, F., & Molina-Sabio, M. (1992) · Carbon · doi:10.1016/0008-6223(92)90143-k · Cited by 585
Fast pyrolysis of biomass in free-fall reactor for hydrogen-rich gas
Li, S., Xu, S., Liu, S., Yang, C., & Lu, Q. (2004) · Fuel Processing Technology · doi:10.1016/j.fuproc.2003.11.043 · Cited by 517
High surface area activated carbon prepared from cassava peel by chemical activation
Sudaryanto, Y., Hartono, S. B., Irawaty, W., Hindarso, H., & Ismadji, S. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2005.04.029 · Cited by 457
Adsorption by Powders and Porous Solids
Rouquérol, F., Rouquérol, J., & Sing, K. S. W. (2014) · Elsevier eBooks · doi:10.1016/c2010-0-66232-8 · Cited by 444
About reactions occurring during chemical activation with hydroxides
Lillo-Ródenas, M. A., Juan-Juan, J., Cazorla-Amorós, D., & Linares-Solano, A. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.008 · Cited by 389
Preparation and characteristics of activated carbon from olive stones and walnut shells
Martínez, M. L., Torres, M. M., Guzmán, C. A., & Maestri, D. (2005) · Industrial Crops and Products · doi:10.1016/j.indcrop.2005.03.001 · Cited by 225
Phenol adsorption onto powdered and granular activated carbon, prepared from Eucalyptus wood
Tancredi, N., Medero, N., Möller, F., Píriz, J., Plada, C., & Cordero, T. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.06.067 · Cited by 182
Activated carbons prepared by pyrolysis of mixtures of carbon precursor/alkaline hydroxide
Lillo-Ródenas, M. A., Marco-Lozar, J. P., Cazorla‐Amorós, D., & Linares-Solano, A. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.01.014 · Cited by 175
Cited by
Sorted by citations
Methods for preparation and activation of activated carbon: a review
Heidarinejad, Z., Dehghani, M. H., Heidari, M., Javedan, G., Ali, I., & Sillanpää, M. E. T. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-019-00955-0 · Cited by 1,480
Production and utilization of biochar: A review
Cha, J. S., Park, S. H., Jung, S.-C., Ryu, C., Jeon, J.-K., Shin, M.-C., & Park, Y.-K. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.06.002 · Cited by 1,293
González-García, P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.117 · Cited by 984
Abioye, A. M., & Ani, F. N. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.129 · Cited by 833
Dye Sequestration Using Agricultural Wastes as Adsorbents
Adegoke, K. A., & Bello, O. S. (2015) · Water Resources and Industry · doi:10.1016/j.wri.2015.09.002 · Cited by 533
Metadata
- Authors
- Tay, T., Ucar, S., & Karagöz, S.
- Affiliations
- Anadolu University (TR)
- Dokuz Eylül University (TR)
- Corresponding author
- Karagöz, Selhan
- ORCID
- Karagöz, Selhan
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2009-06-15
- Volume
- 165
- Issue
- 1-3
- Pages
- 481-485
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2038967466
- Cited by
- 446
- References
- 14
- Citations by year
- 2026: 20 · 2025: 33 · 2024: 43 · 2023: 40 · 2022: 30 · 2021: 39 · 2020: 42 · 2019: 28 · 2018: 24 · 2017: 28 · 2016: 19 · 2015: 27 · 2014: 16 · 2013: 12 · 2012: 13
- FWCI
- 11.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Hazardous Materials (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Dokuz Eylül Üniversitesi
- Anadolu Üniversitesi
- Topics
- Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Keywords
- activated carbon, lignocellulosic biomass, chemical activation, potassium carbonate, potassium hydroxide, pyrolysis temperature, porosity, surface area, ash content, sulfur content, biomass waste valorization
- MeSH terms
- Charcoal, Hot Temperature, Indicators and Reagents, Soybean Oil, Porosity, Biomass
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
