The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Effect of heat treatment on hydrophobic silica aerogel
Abstract
Hydrophobic silica aerogels were heat treated under various conditions. Physical and chemical analyses were conducted to study the effect of the heat treatments on the silica aerogels. The O/Si and C/Si values in the hydrophobic silica aerogels increased and decreased, respectively, with the increase in the heating temperature. C-O, -OH, and CO were detected during pyrolysis. Pyrolysis of the silica aerogels in air could be divided into 3 steps: the hydroxylation of methyl groups, the splitting of the alcoholic hydroxyl, and the oxidisation of CO. When the heat treatment temperature was lower than 350 °C, the properties of the silica aerogels showed little change. With further increase in the heat treatment temperature, the variation in the relevant parameters became more prominent. The secondary particles coalesced with one another, and the mesopores were destroyed. Consequently, the thermal conductivity and bulk density rose greatly. The carbon within the silica aerogels was released after heat treatment. As a result, the heat released in the thermal gravimetry and oxygen bomb analyses dropped remarkably with the increase in the heat treatment temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption Surface Area and Porosity
Gregg, S. J., Sing, K. S. W., & Salzberg, H. W. (1967) · Journal of The Electrochemical Society · doi:10.1149/1.2426447 · Cited by 9,507
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
Aerogel insulation for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2011) · Energy and Buildings · doi:10.1016/j.enbuild.2010.12.012 · Cited by 1,091
Toward aerogel based thermal superinsulation in buildings: A comprehensive review
Cuce, E., Cuce, P. M., Wood, C. J., & Riffat, S. B. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.03.017 · Cited by 775
Advances in carbon nanostructure–silica aerogel composites: a review
Lamy-Mendes, A., Silva, R. F., & Durães, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08959g · Cited by 212
Haukka, S., & Root, A. (1994) · The Journal of Physical Chemistry · doi:10.1021/j100057a025 · Cited by 152
Buratti, C., Merli, F., & Moretti, E. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.07.071 · Cited by 146
Synthesis of nanometre silicon carbide whiskers from binary carbonaceous silica aerogels
Li, X. K., Liu, L., Zhang, Y. X., Shen, S. D., Ge, S. N., & Ling, L. C. (2001) · Carbon · doi:10.1016/s0008-6223(00)00020-8 · Cited by 142
Perspective of aerogel glazings in energy efficient buildings
Gao, T., Ihara, T., Grynning, S., Jelle, B. P., & Lien, A. G. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.10.001 · Cited by 119
Characteristics of nanoporous silica aerogel under high temperature from 950 °C to 1200 °C
Huang, D., Guo, C., Zhang, M., & Shi, L. X. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.024 · Cited by 117
Cited by
Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture
He, S., Chen, G., Xiao, H., Shi, G., Ruan, C., Ma, Y., Dai, H., Yuan, B., Chen, X., & Yang, X. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.08.021 · Cited by 375
Self-citationIn-situ immobilization of ZIF-67 on wood aerogel for effective removal of tetracycline from water
Chen, G., He, S., Shi, G., Ma, Y., Ruan, C., Jin, X., Chen, Q., Liu, X., Dai, H., Chen, X., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130184 · Cited by 289
Self-citationParale, V. G., Kim, T., Choi, H., Phadtare, V. D., Dhavale, R. P., Kanamori, K., & Park, H. (2024) · Advanced Materials · doi:10.1002/adma.202307772 · Cited by 146
PVA-assisted CNCs/SiO2 composite aerogel for efficient sorption of ciprofloxacin
Ruan, C., Chen, G., Ma, Y., Du, C., He, C., Liu, X., Jin, X., Chen, Q., He, S., & Huang, Y. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.10.020 · Cited by 49
Self-citationJadhav, S. B., Makki, A., Hajjar, D., & Sarawade, P. B. (2022) · Journal of Porous Materials · doi:10.1007/s10934-022-01231-3 · Cited by 24
Metadata
- Authors
- He, S., Huang, Y., Chen, G., Feng, M., Dai, H., Yuan, B., & Chen, X.
- Venue
- Journal of Hazardous Materials
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 362
- Pages
- 294-302
- ISSN
- 0304-3894 (ISSN-L)
- OpenAlex
- W2891766502
- Cited by
- 269
- References
- 22
- FWCI
- 8.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of heat treatment on hydrophobic silica aerogel. https://app.cochat.ai/papers/10.1016/j.jhazmat.2018.08.087
- The paper
- He, S., Huang, Y., Chen, G., Feng, M., Dai, H., Yuan, B., & Chen, X. (2019). Effect of heat treatment on hydrophobic silica aerogel. Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2018.08.087
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.