A study on electrode fabrication and operation variables affecting the performance of anion exchange membrane water electrolysis
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Abstract Polymer electrolyte membrane water electrolysis has been proposed to address production of high purity hydrogen for storage of excess renewable energy. Among them, alkaline electrolyte membrane based water electrolysis (AEMWE) has an advantage in the aspect of material costs, e.g. from non-noble catalysts and membrane, but suffers from lower performance compared to proton exchange membrane based water electrolysis (PEMWE). However, there are fewer researches on single cell MEA and operation study compared to material research to enhance AEMWE performance. Here, we analyze the effect of the cell construction and operation factors, i.e MEA pressing, torque of cell assembly, electrolyte pre-feed methods, and operation temperature, to obtain high performance in AEMWE single cell operation. 97.5 % current improves at 1.8 V by applying optimized torque. 94 % decrease of ohmic resistance are achieved from electrolyte pre-feeding. 50 mA cm−2 of current density is enhanced at 0.591 V of overvoltage per 10 °C temperature increase due to higher ionic conductivity and reaction kinetics. These factors significantly affect internal factors such as not only material property during operation but also, catalysts structure and contact in MEA, leading 4.3 times progress of current density from 0.242 to 1.045 A cm−2 at 1.8 Vcell.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on production, storage of hydrogen and its utilization as an energy resource
Dutta, S. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.07.037 · Cited by 797
Benchmarking nanoparticulate metal oxide electrocatalysts for the alkaline water oxidation reaction
Jung, S., McCrory, C. C. L., Ferrer, I. M., Peters, J. C., & Jaramillo, T. F. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta07586f · Cited by 600
First implementation of alkaline polymer electrolyte water electrolysis working only with pure water
Xiao, L., Zhang, S., Pan, J., Yang, C., He, M., Zhuang, L., & Lu, J. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22146b · Cited by 313
Cited by
Miller, H. A., Bouzek, K., Hnat, J., Loos, S., Bernäcker, C. I., Weißgärber, T., Röntzsch, L., & Meier-Haack, J. (2020) · Sustainable Energy & Fuels · doi:10.1039/c9se01240k · Cited by 785
Anion-exchange membrane water electrolyzers and fuel cells
Yang, Y., Li, P., Zheng, X., Sun, W., Dou, S. X., Ma, T., & Pan, H. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00038e · Cited by 575
The promise of hydrogen production from alkaline anion exchange membrane electrolyzers
Li, C., & Baek, J.-B. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106162 · Cited by 425
Overview: State-of-the Art Commercial Membranes for Anion Exchange Membrane Water Electrolysis
Henkensmeier, D., Najibah, M., Harms, C., Žitka, J., Hnát, J., & Bouzek, K. (2021) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4047963 · Cited by 382
Self-citationWan, L., Xu, Z., Xu, Q., Pang, M., Lin, D., Liu, J., & Wang, B. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00142c · Cited by 371
Metadata
- Authors
- Lim, A., Kim, H.-J., Henkensmeier, D., Jong Yoo, S., Young Kim, J., Young Lee, S., Sung, Y.-E., Jang, J. H., & Park, H. S.
- Venue
- Journal of Industrial and Engineering Chemistry
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 76
- Pages
- 410-418
- ISSN
- 1226-086X (ISSN-L)
- OpenAlex
- W2936123755
- Cited by
- 139
- References
- 3
- FWCI
- 4.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.