The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
Advanced ceramic components: Materials, fabrication, and applications
Open accessAbstract
The global demand for ceramic materials with wide-ranging applications in the environment, precision tools, biomedical, and electronics, and environmental fields is on the increase. Several ceramic materials and methods of fabrication have been developed with task-specific properties. The material, the fabrication methods, and processing conditions impel characteristics including corrosion-resistant, outstanding optical and electrical properties, hardness and anti-aging. In this review, various materials for the preparation of ceramics and ceramic composites components were investigated to demonstrate the contribution of the materials and different fabrication methods to the properties of the ceramics components. The material properties, sintering temperature, casting technique, and pressure influences the ceramics grain size and porosity, which have an explicit effect on mechanical strength, corrosion-resistant, and optical properties of the ceramic components. The finishing of the ceramic components into a machinable shape requires careful attention to avoid defects. However, most conventional finishing methods are cost-intensive, hence, the need to commercialize 3-D printing for large scale and long-run applications. It is hoped that this review would propagate wider research on low cost and energy effective pathways to produce ceramics with dynamic properties, which can be applied in several fields with outstanding performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Otitoju, T. A., Li, Y., Liu, R., Wang, J., Ouyang, Y., Jiang, D., & Li, S. (2019) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2019.101072 · Cited by 9
Self-citationRetractedProgress in the production and modification of PVDF membranes
Liu, F., Hashim, N. A., Liu, Y., Abed, M. R. M., & Li, K. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.03.014 · Cited by 2,275
Processing Routes to Macroporous Ceramics: A Review
Studart, A. R., Gonzenbach, U. T., Tervoort, E., & Gauckler, L. J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01044.x · Cited by 1,839
Fundamentals of microfabrication : the science of miniaturization
Madou, M. J. (2002) · Cited by 1,593
Microwave Dielectric Ceramics for Resonators and Filters in Mobile Phone Networks
Reaney, I. M., & Iddles, D. M. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01025.x · Cited by 1,281
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
Ordered macroporous materials by emulsion templating
Imhof, A., & Pine, D. J. (1997) · Nature · doi:10.1038/40105 · Cited by 1,150
Microwave Processing of Materials
Clark, D. E. (1996) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.26.1.299 · Cited by 1,030
Current ceramic materials and systems with clinical recommendations: A systematic review
Conrad, H. J., Seong, W.-J., & Pesun, I. J. (2007) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(07)60124-3 · Cited by 981
Spark Plasma Sintering of Alumina
Shen, Z. J., Johnsson, M., Zhe Zhao, B., & Nygren, M. (2002) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2002.tb00381.x · Cited by 810
Paralinear Oxidation of CVD SiC in Water Vapor
Opila, E. J., & Hann, R. E. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb02810.x · Cited by 565
Scotti, K. L., & Dunand, D. C. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.01.001 · Cited by 377
Samaei, S. M., Gato-Trinidad, S., & Altaee, A. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.02.041 · Cited by 377
Silver nanoparticle-decorated porous ceramic composite for water treatment
Lv, Y., Liu, H., Wang, Z., Liu, S., Hao, L., Sang, Y., Liu, D., Wang, J., & Boughton, R. I. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.01.007 · Cited by 322
Joining of engineering ceramics
Fernie, J. A., Drew, R. A. L., & Knowles, K. M. (2009) · International Materials Reviews · doi:10.1179/174328009x461078 · Cited by 282
Colloidal Stabilization of Nanoparticles in Concentrated Suspensions
Studart, A. R., Amstad, E., & Gauckler, L. J. (2007) · Langmuir · doi:10.1021/la062042s · Cited by 261
Liu, R., Xu, T., & Wang, C.-A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2015.10.148 · Cited by 248
Lin, H., Niu, J., Liang, S., Wang, C., Wang, Y., Jin, F., Luo, Q., & Huang, Q. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.07.210 · Cited by 248
Directionally freeze-cast titanium foam with aligned, elongated pores
Chino, Y., & Dunand, D. C. (2008) · Acta Materialia · doi:10.1016/j.actamat.2007.09.002 · Cited by 244
Fundamental Research in Structural Ceramics for Service Near 2000°C
Raj, R. (1993) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1993.tb07750.x · Cited by 240
WETTLAUFER, J. S., WORSTER, M. G., & HUPPERT, H. E. (1997) · Journal of Fluid Mechanics · doi:10.1017/s0022112097006022 · Cited by 191
Macroporous Ceramics from Particle‐stabilized Emulsions
Akartuna, I., Studart, A. R., Tervoort, E., & Gauckler, L. J. (2008) · Advanced Materials · doi:10.1002/adma.200801888 · Cited by 149
Cellular Ceramics by Direct Foaming of Emulsified Ceramic Powder Suspensions
Barg, S., Soltmann, C., Andrade, M., Koch, D., & Grathwohl, G. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02553.x · Cited by 141
Microsystem technologies for implantable applications
Receveur, R. A. M., Lindemans, F. W., & de Rooij, N. F. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/5/r02 · Cited by 138
Preparation and characterization of novel ceramic membranes for micro-filtration applications
Das, B., Chakrabarty, B., & Barkakati, P. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.06.125 · Cited by 121
Yuan, Y., Li, Z., Cao, L., Tang, B., & Zhang, S. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.05.194 · Cited by 98
Ko, C., Ali, A., Drioli, E., Tung, K., Chen, C., Chen, Y., & Macedonio, F. (2018) · Desalination · doi:10.1016/j.desal.2018.03.011 · Cited by 86
Gao, N., & Xu, Z. (2018) · Separation and Purification Technology · doi:10.1016/j.seppur.2018.11.084 · Cited by 77
Devlopment of palladium/ceramic membranes for hydrogen separation
David, E. D., & Kopač, J. (2011) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.12.032 · Cited by 66
Wang, S., Tian, J., Wang, Q., Zhao, Z., Cui, F., & Li, G. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.10.078 · Cited by 65
Freeze-casting for the fabrication of solid oxide fuel cells: A review
Du, Y., Hedayat, N., Panthi, D., Ilkhani, H., Emley, B. J., & Woodson, T. (2018) · Materialia · doi:10.1016/j.mtla.2018.07.005 · Cited by 64
Krause, T., Molotnikov, A., Carlesso, M., Rente, J., Rezwan, K., Estrin, Y., & Koch, D. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201100244 · Cited by 62
Liu, Y., Ma, H., Hsiao, B. S., Chu, B., & Tsou, A. H. (2016) · Polymer · doi:10.1016/j.polymer.2016.11.020 · Cited by 47
Hierarchical micro-nanostructured albite-based glass-ceramic for high dielectric strength insulators
Fuertes, V., Cabrera, M. J., Seores, J., Muñoz, D., Fernández, J. F., & Enríquez, E. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.02.009 · Cited by 46
Hydroxyapatite/SiO2 Composites via Freeze Casting for Bone Tissue Engineering
Blindow, S., Pulkin, M., Koch, D., Grathwohl, G., & Rezwan, K. (2009) · Advanced Engineering Materials · doi:10.1002/adem.200900208 · Cited by 41
Comparison of micropatterning methods for ceramic surfaces
Holthaus, M. G., Treccani, L., & Rezwan, K. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.07.020 · Cited by 40
Directional Solidification with Constant Ice Front Velocity in the Ice‐Templating Process
Stolze, C., Janoschka, T., Schubert, U. S., Müller, F. A., & Flauder, S. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201500235 · Cited by 38
Tomina, V. V., Stolyarchuk, N. V., Melnyk, I., Zub, Y. L., Kouznetsova, T. F., Прозорович, В. Г., & Ivanets, A. I. (2016) · Separation and Purification Technology · doi:10.1016/j.seppur.2016.11.040 · Cited by 37
Freeze casting of composite system with stable fiber network and movable particles
Hu, X., Yang, L., Li, L., Xie, D., & Du, H. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.05.049 · Cited by 34
Wang, L., Kang, W.-T., Gao, P., et al. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.12.052 · Cited by 32
Mallick, K. K., & Winnett, J. (2012) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2012.05071.x · Cited by 31
Seuba, J., Leloup, J., Richaud, S., Deville, S., Guizard, C., & Stevenson, A. J. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.01.014 · Cited by 31
Porous ceramics with tailored pore size and morphology as substrates for coral larval settlement
Antink, M. M. H., Roepke, L. K., Bartels, J., Soltmann, C., Kunzmann, A., Rezwan, K., & Kroll, S. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.06.078 · Cited by 24
Ahmad, A. L., Otitoju, T. A., & Ooi, B. S. (2018) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2018.08.021 · Cited by 23
Design and preparation of a novel degradable low-temperature co-fired ceramic (LTCC) composites
Sun, Z. P., Li, W., Liu, Y., Zhang, H., Zhu, D., Sun, H., Hu, C., & Chen, S. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.12.201 · Cited by 21
Self-supported ceramic substrates with directional porosity by mold freeze casting
Gurauskis, J., Graves, C., Moreno, R., & Nieto, M. I. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.08.031 · Cited by 18
Ba2BiSbO6: A novel microwave dielectric ceramic with monoclinic structure
Xing, C. F., Bao, J., Sun, Y. F., Sun, J., & Wu, H. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.12.248 · Cited by 17
Processing and microstructure of freeze-cast silica foams
Verma, J., Vijayakumar, M., & Mitra, R. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.04.019 · Cited by 9
Cited by
A Comprehensive Review of Nanomaterials: Types, Synthesis, Characterization, and Applications
(2022) · Biointerface Research in Applied Chemistry · doi:10.33263/briac131.041 · Cited by 269
Metadata
- Authors
- Ayode Otitoju, T., Ugochukwu Okoye, P., Chen, G., Li, Y., Onyeka Okoye, M., & Li, S.
- Venue
- Journal of Industrial and Engineering Chemistry
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 85
- Pages
- 34-65
- ISSN
- 1226-086X (ISSN-L)
- OpenAlex
- W3004696880
- Cited by
- 368
- References
- 48
- FWCI
- 18.58
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.