The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Joining of engineering ceramics
Abstract
Engineering ceramics such as alumina, zirconia, silicon nitride and silicon carbide can now be manufactured reliably with reproducible properties. As such, they are of increasing interest to industry, particularly for use in demanding environments, where their thermomechanical performance is of critical importance, with applications ranging from fuel cells to cutting tools. One aspect common to virtually all applications of engineering ceramics is that eventually they must be joined with another material, most usually a metal. The joining of engineering ceramics to metals is not always easy. There are two main considerations. The first consideration is the basic difference in atomic bonding: the ionic or covalent bonding of the ceramic, compared to the metallic bond. The second consideration is the mismatch in the coefficient of thermal expansion. In general, ceramics have a lower coefficient of thermal expansion than metals and, if high tensile forces are produced in the ceramic, either as a consequence of operating conditions or from the joining procedure itself, failure can occur. The plethora of joining processes available will be reviewed in this article, placing them in context from both an academic and commercial perspective. Comment will be made on research reporting advances on known technology, as well as introducing ‘newer’ technologies developed over the last 10 years. Finally, reviews and commentary will be made on the potential applications of the various joining processes in the commercial environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Structural Inorganic Chemistry
(1971) · Nature · doi:10.1038/229453c0 · Cited by 5,766
The Superalloys: Fundamentals and Applications
Reed, R. C. (2008) · Cited by 3,725
The Superalloys: Fundamentals and Applications
Reed, R. C. (2006) · Cambridge University Press eBooks · doi:10.1017/cbo9780511541285 · Cited by 2,369
Silicon Nitride and Related Materials
Riley, F. L. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01182.x · Cited by 1,566
CRC Materials Science and Engineering Handbook
Shackelford, J. F., Han, Y.-H., Kim, S., & Kwon, S.-H. (2016) · CRC Press eBooks · doi:10.1201/b18971 · Cited by 1,274
Current ceramic materials and systems with clinical recommendations: A systematic review
Conrad, H. J., Seong, W.-J., & Pesun, I. J. (2007) · The Journal of Prosthetic Dentistry · doi:10.1016/s0022-3913(07)60124-3 · Cited by 981
The application of the specular reflection of neutrons to the study of surfaces and interfaces
Penfold, J., & Thomas, R. K. (1990) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/2/6/001 · Cited by 621
Ceramic microstructures : property control by processing
Lee, W. E., & Rainforth, W. M. (1994) · Chapman & Hall eBooks · Cited by 361
Ordered Liquid Aluminum at the Interface with Sapphire
Oh, S. H., Kauffmann, Y., Scheu, C., Kaplan, W. D., & Rühle, M. (2005) · Science · doi:10.1126/science.1118611 · Cited by 361
Current Concepts in Orthopaedic Biomaterials and Implant Fixation
FRIEDMAN, R. J., BLACK, J., GALANTE, J. O., JACOBS, J. J., & SKINNER, H. B. (1993) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-199307000-00017 · Cited by 210
Research works printed but not linked: 273
- 10.1179/096797803225009274 · doi:10.1179/096797803225009274
- 10.1111/j.1151-2916.2000.tb01221.x · doi:10.1111/j.1151-2916.2000.tb01221.x
- 10.2109/jcersj.114.905 · doi:10.2109/jcersj.114.905
- M. F. Ashby: ‘Cambridge engineering selector v4’; 2007, Cambridge, Granta Design Limited.
- 10.1016/j.applthermaleng.2003.11.019 · doi:10.1016/j.applthermaleng.2003.11.019
- Fernie J. A., 1999, Ind Ceram, 19, 172
- D. M. Jacobson and G. Humpston: ‘Principles of brazing’; 2005, Materials Park, OH, ASM International. · doi:10.31399/asm.tb.pb.9781627083515
- 10.1143/JJAP.40.3789 · doi:10.1143/jjap.40.3789
- 10.1299/jsmea.48.317 · doi:10.1299/jsmea.48.317
- Imai H., 2006, JSME Int. J. Ser. A, 49, 450
- 10.1016/0955-2219(95)00076-7 · doi:10.1016/0955-2219(95)00076-7
- 10.1016/S0042-207X(01)00456-0 · doi:10.1016/s0042-207x(01)00456-0
- 10.1111/j.1151-2916.1999.tb01902.x · doi:10.1111/j.1151-2916.1999.tb01902.x
- 10.1109/TPS.2006.883409 · doi:10.1109/tps.2006.883409
- Lindner P., 2004, Solid State Technol, 47, 55
- 10.1088/0960-1317/5/2/010 · doi:10.1088/0960-1317/5/2/010
- 10.1088/0960-1317/9/4/305 · doi:10.1088/0960-1317/9/4/305
- 10.1080/14786430310001637015 · doi:10.1080/14786430310001637015
- 10.4028/www.scientific.net/AST.45.1558 · doi:10.4028/www.scientific.net/ast.45.1558
- 10.1111/j.1151-2916.2003.tb03553.x · doi:10.1111/j.1151-2916.2003.tb03553.x
- 10.1007/s00542-005-0040-8 · doi:10.1007/s00542-005-0040-8
- 10.1016/j.ssi.2006.12.012 · doi:10.1016/j.ssi.2006.12.012
- 10.1557/JMR.1994.2574 · doi:10.1557/jmr.1994.2574
- 10.1080/01418619708209859 · doi:10.1080/01418619708209859
- 10.1080/01418619708209860 · doi:10.1080/01418619708209860
- 10.1016/S1359-6462(99)00271-7 · doi:10.1016/s1359-6462(99)00271-7
- 10.1023/A:1004319100692 · doi:10.1023/a:1004319100692
- 10.1023/A:1004367016622 · doi:10.1023/a:1004367016622
- 10.1016/S0167-577X(98)00166-9 · doi:10.1016/s0167-577x(98)00166-9
- 10.1016/S0924-0136(01)00892-5 · doi:10.1016/s0924-0136(01)00892-5
- 10.1016/S0167-577X(01)00536-5 · doi:10.1016/s0167-577x(01)00536-5
- 10.1111/j.1151-2916.2001.tb01039.x · doi:10.1111/j.1151-2916.2001.tb01039.x
- 10.1016/j.ceramint.2003.09.017 · doi:10.1016/j.ceramint.2003.09.017
- 10.1016/0956-716X(95)00206-B · doi:10.1016/0956-716x(95)00206-b
- 10.1557/JMR.1998.0224 · doi:10.1557/jmr.1998.0224
- 10.1016/S1359-6462(99)00190-6 · doi:10.1016/s1359-6462(99)00190-6
- 10.1016/S0955-2219(99)00154-5 · doi:10.1016/s0955-2219(99)00154-5
- 10.1016/S1359-6454(02)00161-1 · doi:10.1016/s1359-6454(02)00161-1
- 10.1557/JMR.2000.0248 · doi:10.1557/jmr.2000.0248
- 10.1023/A:1013804301381 · doi:10.1023/a:1013804301381
- 10.1016/S0263-8223(02)00077-6 · doi:10.1016/s0263-8223(02)00077-6
- 10.1016/j.jeurceramsoc.2006.05.055 · doi:10.1016/j.jeurceramsoc.2006.05.055
- 10.1016/S1359-6462(01)01092-2 · doi:10.1016/s1359-6462(01)01092-2
- 10.1007/s10853-005-2813-y · doi:10.1007/s10853-005-2813-y
- 10.1016/S0955-2219(98)80011-3 · doi:10.1016/s0955-2219(98)80011-3
- 10.1023/A:1004507124881 · doi:10.1023/a:1004507124881
- 10.1016/S0924-0136(02)00277-7 · doi:10.1016/s0924-0136(02)00277-7
- 10.1016/S0167-577X(01)00619-X · doi:10.1016/s0167-577x(01)00619-x
- 10.1016/S0955-2219(97)00056-3 · doi:10.1016/s0955-2219(97)00056-3
- 10.1016/S0272-8842(02)00118-9 · doi:10.1016/s0272-8842(02)00118-9
- 10.1111/j.1151-2916.2001.tb00730.x · doi:10.1111/j.1151-2916.2001.tb00730.x
- 10.1016/j.ceramint.2003.11.018 · doi:10.1016/j.ceramint.2003.11.018
- 10.1111/j.1151-2916.2000.tb01662.x · doi:10.1111/j.1151-2916.2000.tb01662.x
- 10.1080/01418619708209975 · doi:10.1080/01418619708209975
- 10.1016/S1359-6462(96)00330-2 · doi:10.1016/s1359-6462(96)00330-2
- 10.1023/A:1004397019927 · doi:10.1023/a:1004397019927
- 10.1016/S0955-2219(03)00339-X · doi:10.1016/s0955-2219(03)00339-x
- 10.1002/sia.1912 · doi:10.1002/sia.1912
- 10.1016/j.powtec.2004.09.035 · doi:10.1016/j.powtec.2004.09.035
- 10.1016/S0167-577X(00)00232-9 · doi:10.1016/s0167-577x(00)00232-9
- 10.1179/096797800680947 · doi:10.1179/096797800680947
- 10.1016/S0955-2219(01)00227-8 · doi:10.1016/s0955-2219(01)00227-8
- 10.1016/j.apsusc.2004.05.290 · doi:10.1016/j.apsusc.2004.05.290
- 10.1111/j.1151-2916.1999.tb02000.x · doi:10.1111/j.1151-2916.1999.tb02000.x
- 10.1111/j.1551-2916.2005.00381.x · doi:10.1111/j.1551-2916.2005.00381.x
- 10.1016/S1359-6462(00)00360-2 · doi:10.1016/s1359-6462(00)00360-2
- 10.1007/s10853-006-1491-8 · doi:10.1007/s10853-006-1491-8
- 10.1016/S0955-2219(03)00369-8 · doi:10.1016/s0955-2219(03)00369-8
- 10.1179/174328413X13789825316707 · doi:10.1179/174328413x13789825316707
- 10.1016/S1359-6454(98)00028-7 · doi:10.1016/s1359-6454(98)00028-7
- 10.1016/S1359-6454(02)00193-3 · doi:10.1016/s1359-6454(02)00193-3
- 10.1016/S1359-6454(02)00194-5 · doi:10.1016/s1359-6454(02)00194-5
- 10.1016/S1359-6454(99)00273-6 · doi:10.1016/s1359-6454(99)00273-6
- 10.1007/s10853-006-0728-x · doi:10.1007/s10853-006-0728-x
- 10.1016/j.actamat.2006.10.026 · doi:10.1016/j.actamat.2006.10.026
- Ito M., 1991, US Patent 5073085
- 10.1115/1.2906692 · doi:10.1115/1.2906692
- 10.1115/1.2906681 · doi:10.1115/1.2906681
- 10.1016/S1359-6454(01)00269-5 · doi:10.1016/s1359-6454(01)00269-5
- 10.1016/S0955-2219(99)00027-8 · doi:10.1016/s0955-2219(99)00027-8
- 10.1111/j.1551-2916.2005.00485.x · doi:10.1111/j.1551-2916.2005.00485.x
- 10.1023/A:1010950427079 · doi:10.1023/a:1010950427079
- 10.1179/026708304225016798 · doi:10.1179/026708304225016798
- 10.1016/0924-0136(96)85102-8 · doi:10.1016/0924-0136(96)85102-8
- 10.1016/S1044-5803(00)00095-4 · doi:10.1016/s1044-5803(00)00095-4
- 10.1023/A:1020669022776 · doi:10.1023/a:1020669022776
- 10.1016/j.jeurceramsoc.2006.04.102 · doi:10.1016/j.jeurceramsoc.2006.04.102
- 10.1007/s12034-007-0067-9 · doi:10.1007/s12034-007-0067-9
- 10.1023/A:1004378520526 · doi:10.1023/a:1004378520526
- 10.1016/S0955-2219(02)00426-0 · doi:10.1016/s0955-2219(02)00426-0
- 10.1016/S0955-2219(01)00165-0 · doi:10.1016/s0955-2219(01)00165-0
- 10.1149/1.2134293 · doi:10.1149/1.2134293
- 10.1111/j.1151-2916.1992.tb05500.x · doi:10.1111/j.1151-2916.1992.tb05500.x
- 10.1007/s10853-006-0073-0 · doi:10.1007/s10853-006-0073-0
- 10.1016/j.matlet.2007.01.036 · doi:10.1016/j.matlet.2007.01.036
- 10.1016/S0955-2219(00)00037-6 · doi:10.1016/s0955-2219(00)00037-6
- 10.1016/j.jeurceramsoc.2006.02.028 · doi:10.1016/j.jeurceramsoc.2006.02.028
- 10.1016/j.jeurceramsoc.2006.04.037 · doi:10.1016/j.jeurceramsoc.2006.04.037
- 10.1016/S0924-0136(00)00814-1 · doi:10.1016/s0924-0136(00)00814-1
- 10.1007/s10854-006-0024-1 · doi:10.1007/s10854-006-0024-1
- 10.1016/j.vacuum.2005.01.027 · doi:10.1016/j.vacuum.2005.01.027
- 10.1016/j.surfcoat.2006.01.090 · doi:10.1016/j.surfcoat.2006.01.090
- Duvall D. S., 1974, Weld, 1, 203
- 10.1016/S0272-8842(96)00024-7 · doi:10.1016/s0272-8842(96)00024-7
- 10.1016/S1359-8368(97)00039-5 · doi:10.1016/s1359-8368(97)00039-5
- 10.1016/S1359-6454(00)00229-9 · doi:10.1016/s1359-6454(00)00229-9
- 10.1111/j.1151-2916.2002.tb00491.x · doi:10.1111/j.1151-2916.2002.tb00491.x
- 10.1111/j.1151-2916.2002.tb00490.x · doi:10.1111/j.1151-2916.2002.tb00490.x
- 10.1016/j.jeurceramsoc.2005.06.034 · doi:10.1016/j.jeurceramsoc.2005.06.034
- 10.1016/S0254-0584(02)00072-X · doi:10.1016/s0254-0584(02)00072-x
- 10.1016/1359-6454(95)00187-5 · doi:10.1016/1359-6454(95)00187-5
- 10.1016/j.ijrmhm.2004.01.003 · doi:10.1016/j.ijrmhm.2004.01.003
- 10.1023/A:1017503503711 · doi:10.1023/a:1017503503711
- 10.1023/A:1018529228375 · doi:10.1023/a:1018529228375
- G. Humpston and D. M. Jacobson: ‘Principles of soldering’; 2005, Materials Park, OH, ASM International. · doi:10.31399/asm.tb.ps.9781627083522
- Fernie J. A., 1999, Mater. World, 7, 686
- Loehman R. E., 1989, Am. Ceram. Soc. Bull, 68, 891
- 10.1016/j.cossms.2006.04.004 · doi:10.1016/j.cossms.2006.04.004
- 10.1007/s11837-999-0209-1 · doi:10.1007/s11837-999-0209-1
- Eustathopoulos N., 1998, Acta Mater, 46, 2319
- 10.1016/S1359-6454(98)00100-1 · doi:10.1016/s1359-6454(98)00100-1
- 10.1016/S1359-6454(98)80016-5 · DOI
- 10.1007/s10853-007-1915-0 · doi:10.1007/s10853-007-1915-0
- 10.1016/S1359-6462(00)00549-2 · doi:10.1016/s1359-6462(00)00549-2
- 10.1016/S1359-6462(98)00030-X · doi:10.1016/s1359-6462(98)00030-x
- 10.1016/S1359-6462(00)00298-0 · doi:10.1016/s1359-6462(00)00298-0
- 10.1016/j.cossms.2006.07.006 · doi:10.1016/j.cossms.2006.07.006
- 10.1016/j.cossms.2006.04.005 · doi:10.1016/j.cossms.2006.04.005
- Sobczak N., 2005, Curr. Opin. Solid State Mater. Set, 9, 241 — 253
- 10.1016/j.cossms.2006.03.003 · doi:10.1016/j.cossms.2006.03.003
- 10.1016/S1359-6454(00)00228-7 · doi:10.1016/s1359-6454(00)00228-7
- 10.1016/j.cossms.2005.11.001 · doi:10.1016/j.cossms.2005.11.001
- 10.1016/S1359-6454(96)00170-X · doi:10.1016/s1359-6454(96)00170-x
- 10.1016/S0921-4526(98)00254-3 · doi:10.1016/s0921-4526(98)00254-3
- 10.1016/S0921-4526(98)00256-7 · doi:10.1016/s0921-4526(98)00256-7
- 10.1016/S1359-6454(98)80020-7 · doi:10.1016/s1359-6454(98)80020-7
- 10.1088/0022-3727/32/18/302 · doi:10.1088/0022-3727/32/18/302
- Derby B., 2004, Interf Set, 12, 29
- 10.1111/j.1551-2916.2004.00279.x · doi:10.1111/j.1551-2916.2004.00279.x
- 10.1016/j.scriptamat.2004.05.002 · doi:10.1016/j.scriptamat.2004.05.002
- 10.1016/j.msea.2004.06.002 · doi:10.1016/j.msea.2004.06.002
- 10.1016/j.actamat.2005.11.048 · doi:10.1016/j.actamat.2005.11.048
- 10.1111/j.1151-2916.1993.tb06652.x · doi:10.1111/j.1151-2916.1993.tb06652.x
- 10.1016/S1359-6454(00)00256-1 · doi:10.1016/s1359-6454(00)00256-1
- 10.1016/j.scriptamat.2003.10.015 · doi:10.1016/j.scriptamat.2003.10.015
- 10.1016/S0955-2219(00)00162-X · doi:10.1016/s0955-2219(00)00162-x
- 10.1016/S1359-6454(98)00375-9 · doi:10.1016/s1359-6454(98)00375-9
- 10.1111/j.1151-2916.1998.tb02342.x · doi:10.1111/j.1151-2916.1998.tb02342.x
- 10.1016/S0955-2219(00)00211-9 · doi:10.1016/s0955-2219(00)00211-9
- 10.1016/0956-7151(92)90266-H · doi:10.1016/0956-7151(92)90266-h
- 10.1007/s10853-006-0920-z · doi:10.1007/s10853-006-0920-z
- 10.1023/B:JMSC.0000040082.16505.be · doi:10.1023/b:jmsc.0000040082.16505.be
- 10.1007/s10853-005-1958-z · doi:10.1007/s10853-005-1958-z
- 10.1557/JMR.1989.1456 · doi:10.1557/jmr.1989.1456
- 10.1016/j.scriptamat.2005.01.034 · doi:10.1016/j.scriptamat.2005.01.034
- Ormston D. R., 2001, ‘The particulate reinforcement of active broze alloys for joining silicon carbide’, Cambridge
- 10.1016/j.scriptamat.2004.09.008 · doi:10.1016/j.scriptamat.2004.09.008
- Knowles K. M., 2002, Ceram. Trans, 138, 103
- 10.1179/174329306X113235 · doi:10.1179/174329306x113235
- 10.1016/j.jmatprotec.2007.01.031 · doi:10.1016/j.jmatprotec.2007.01.031
- 10.1016/j.ceramint.2006.03.010 · doi:10.1016/j.ceramint.2006.03.010
- 10.1002/adem.200500233 · doi:10.1002/adem.200500233
- 10.1111/j.1551-2916.2004.00055.x · doi:10.1111/j.1551-2916.2004.00055.x
- 10.1016/S0955-2219(03)00292-9 · doi:10.1016/s0955-2219(03)00292-9
- 10.1007/s10853-005-1952-5 · doi:10.1007/s10853-005-1952-5
- 10.1016/S0924-4247(00)00338-1 · doi:10.1016/s0924-4247(00)00338-1
- 10.1557/jmr.2006.0393 · DOI
- Nolte H. J., 1954, US Patent 2667432
- 10.1007/s11661-005-0240-y · doi:10.1007/s11661-005-0240-y
- 10.1016/S0042-207X(02)00660-7 · doi:10.1016/s0042-207x(02)00660-7
- 10.1007/s10853-005-0920-4 · doi:10.1007/s10853-005-0920-4
- 10.1016/S0040-6090(02)00950-1 · doi:10.1016/s0040-6090(02)00950-1
- 10.1111/j.1151-2916.1993.tb03996.x · doi:10.1111/j.1151-2916.1993.tb03996.x
- 10.1111/j.1151-2916.1998.tb02604.x · doi:10.1111/j.1151-2916.1998.tb02604.x
- 10.1016/j.scriptamat.2007.01.050 · doi:10.1016/j.scriptamat.2007.01.050
- 10.1007/BF01154485 · doi:10.1007/bf01154485
- 10.1023/A:1008942502309 · doi:10.1023/a:1008942502309
- Kim J. Y., 2003, Ceram. Trans, 138, 119, 10.1002/9781118405802.ch6 · doi:10.1002/9781118405802.ch6
- 10.1111/j.1551-2916.2005.00492.x · doi:10.1111/j.1551-2916.2005.00492.x
- 10.1557/JMR.2005.0088 · doi:10.1557/jmr.2005.0088
- 10.1016/j.scriptamat.2005.12.003 · doi:10.1016/j.scriptamat.2005.12.003
- 10.1361/105497106X92862 · doi:10.1361/105497106x92862
- 10.1023/A:1014912923977 · doi:10.1023/a:1014912923977
- 10.1007/s10853-006-1381-0 · doi:10.1007/s10853-006-1381-0
- 10.1149/1.1764782 · doi:10.1149/1.1764782
- 10.1149/1.2430691 · doi:10.1149/1.2430691
- Kim J. Y., 2005, J. Electrochem. Soc, 152, J52—J58
- 10.1149/1.1850391 · doi:10.1149/1.1850391
- 10.1016/j.jpowsour.2005.01.053 · doi:10.1016/j.jpowsour.2005.01.053
- 10.1361/10599490419261 · doi:10.1361/10599490419261
- 10.1557/jmr.2006.0178 · doi:10.1557/jmr.2006.0178
- 10.1016/j.ijhydene.2006.08.054 · doi:10.1016/j.ijhydene.2006.08.054
- 10.1016/j.ijhydene.2006.08.055 · doi:10.1016/j.ijhydene.2006.08.055
- 10.1557/JMR.2004.0221 · doi:10.1557/jmr.2004.0221
- Kim J. Y., 2007, J. Am. Ceram. Soc, 90, 3830, 10.1111/j.1551-2916.2007.02075.x · doi:10.1111/j.1551-2916.2007.02075.x
- 10.1557/JMR.1986.0081 · doi:10.1557/jmr.1986.0081
- Paulasto M., 1997, Ceram. Trans, 77, 91
- 10.1016/S1359-6462(99)00273-0 · doi:10.1016/s1359-6462(99)00273-0
- Peteves S. D., 1998, Acta. Mater, 46, 2407
- 10.1016/j.scriptamat.2005.02.010 · doi:10.1016/j.scriptamat.2005.02.010
200 of 273 shown
Cited by
Advanced ceramic components: Materials, fabrication, and applications
Ayode Otitoju, T., Ugochukwu Okoye, P., Chen, G., Li, Y., Onyeka Okoye, M., & Li, S. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.02.002 · Cited by 368
Ultrafast Laser Additive Manufacturing: A Review
Saunders, J., Elbestawi, M., & Fang, Q. (2023) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp7030089 · Cited by 35
Metadata
- Authors
- Fernie, J. A., Drew, R. A. L., & Knowles, K. M.
- Venue
- International Materials Reviews
- Publisher
- SAGE Publications
- Published
- 2009-09
- Volume
- 54
- Issue
- 5
- Pages
- 283-331
- ISSN
- 0950-6608 (ISSN-L)
- 1743-2804
- OpenAlex
- W1985755219
- Cited by
- 282
- References
- 21
- FWCI
- 10.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Joining of engineering ceramics. https://app.cochat.ai/papers/10.1179/174328009x461078
- The paper
- Fernie, J. A., Drew, R. A. L., & Knowles, K. M. (2009). Joining of engineering ceramics. International Materials Reviews. https://doi.org/10.1179/174328009x461078
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.