The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Insight of magnesium alloys and composites for orthopedic implant applications – a review
Open accessAbstract
Magnesium (Mg) and its alloys have been widely researched for orthopedic applications recently. Mg alloys have stupendous advantages over the commercially available stainless steel, Co-Cr-Ni alloy and titanium implants. Till date, extensive mechanical, in-vitro and in-vivo studies have been done to improve the biomedical performance of Mg alloys through alloying, processing conditions, surface modification etc. This review comprehensively describes the strategies for improving the mechanical and degradation performance of Mg alloys through properly tailoring the composition of alloying elements, reinforcements and processing techniques. It also highlights the status and progress of research in to (i) the selection of nutrient elements for alloying, reinforcement and its effects (ii) type of Mg alloy system (binary, ternary and quaternary) and composites (iii) grain refinement for strengthening through severe plastic deformation techniques. Furthermore it also emphasizes on the importance of Mg composites with regard to hard tissue applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Magnesium and its alloys as orthopedic biomaterials: A review
Staiger, M. P., Pietak, A. M., Huadmai, J., & Dias, G. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.003 · Cited by 4,452
Degradable biomaterials based on magnesium corrosion
Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R., & Feyerabend, F. (2008) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2009.04.001 · Cited by 1,820
The development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593
In vitro and in vivo corrosion measurements of magnesium alloys
Witte, F., Fischer, J., Nellesen, J., Crostack, H.-A., Kaese, V., Pisch, A., Beckmann, F., & Windhagen, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.037 · Cited by 1,386
In vitro corrosion and biocompatibility of binary magnesium alloys
Gu, X., Zheng, Y., Cheng, Y., Zhong, S., & Xi, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.10.021 · Cited by 1,343
Novel Magnesium Alloys Developed for Biomedical Application: A Review
Li, N., & Zheng, Y. (2013) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2013.02.005 · Cited by 744
Kannan, M. B., & Raman, R. K. S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.02.003 · Cited by 545
Zhang, E., Yin, D., Xu, L., Yang, L., & Yang, K. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.08.024 · Cited by 480
Gu, X. N., Xie, X. H., Li, N., Zheng, Y. F., & Qin, L. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.02.018 · Cited by 478
Magnesium and Magnesium Alloys
Ghali, E. (2011) · Uhlig's Corrosion Handbook · doi:10.1002/9780470872864.ch58 · Cited by 460
Eddy Jai Poinern, G., Brundavanam, S., & Fawcett, D. (2013) · American Journal of Biomedical Engineering · doi:10.5923/j.ajbe.20120206.02 · Cited by 361
Bakhsheshi-Rad, H. R., Abdul-Kadir, M. R., Idris, M. H., & Farahany, S. (2012) · Corrosion Science · doi:10.1016/j.corsci.2012.07.015 · Cited by 324
Bornapour, M., Muja, N., Shum-Tim, D., Cerruti, M., & Pekguleryuz, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.07.045 · Cited by 287
Biodegradable Magnesium Alloys: A Review of Material Development and Applications
Persaud-Sharma, D., & McGoron, A. (2012) · Journal of Biomimetics, Biomaterials and Tissue Engineering · doi:10.4028/www.scientific.net/jbbte.12.25 · Cited by 287
Preparation and characterization of a new biomedical magnesium–calcium alloy
Wan, Y., Xiong, G., Luo, H., He, F., Huang, Y., & Zhou, X. (2008) · Materials & Design · doi:10.1016/j.matdes.2008.04.017 · Cited by 280
Influence of Ca and Zn on the microstructure and corrosion of biodegradable Mg–Ca–Zn alloys
Zander, D., & Zumdick, N. A. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.01.027 · Cited by 260
Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance
Salahshoor, M., & Guo, Y. (2012) · Materials · doi:10.3390/ma5010135 · Cited by 254
Effects of secondary phase and grain size on the corrosion of biodegradable Mg–Zn–Ca alloys
Lu, Y., Bradshaw, A. R., Chiu, Y. L., & Jones, I. P. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.12.049 · Cited by 245
Nakamura, Y. (1997) · Fundamental and Applied Toxicology · doi:10.1006/faat.1997.2322 · Cited by 234
Kirkland, N. T., Birbilis, N., Walker, J., Woodfield, T., Dias, G. J., & Staiger, M. P. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31687 · Cited by 216
Cha, P.-R., Han, H.-S., Yang, G.-F., Kim, Y.-C., Hong, K.-H., Lee, S.-C., Jung, J.-Y., Ahn, J.-P., Kim, Y.-Y., Cho, S.-Y., et al. (2013) · Scientific Reports · doi:10.1038/srep02367 · Cited by 206
Influence of Ca on the corrosion properties of magnesium for biomaterials
Kim, W.-C., Kim, J.-G., Lee, J.-Y., & Seok, H.-K. (2008) · Materials Letters · doi:10.1016/j.matlet.2008.06.028 · Cited by 195
Preparation and properties of high purity Mg–Y biomaterials
Peng, Q., Huang, Y., Zhou, L., Hort, N., & Kainer, K. U. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.09.065 · Cited by 187
Biomaterials - Physics and Chemistry
Pignatello, R. (2011) · InTech eBooks · doi:10.5772/914 · Cited by 162
Purnama, A., Hermawan, H., Couet, J., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.027 · Cited by 161
Biodegradable Mg corrosion and osteoblast cell culture studies
Yun, Y., Dong, Z., Yang, D., Schulz, M. J., Shanov, V. N., Yarmolenko, S. N., Xu, Z., Kumta, P. N., & Sfeir, C. S. (2009) · Materials Science and Engineering C · doi:10.1016/j.msec.2009.02.008 · Cited by 146
Bornapour, M., Çelikin, M., Cerruti, M., & Pekguleryuz, M. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.11.011 · Cited by 109
In vitro mechanical and corrosion properties of biodegradable Mg-Ag alloys
Tie, D., Feyerabend, F., Hort, N., Höche, D., Kainer, K. U., Willumeit‐Römer, R., & Müeller, W. D. (2013) · Materials and Corrosion · doi:10.1002/maco.201206903 · Cited by 102
Evaluation of spinal loading during lowering and lifting
Davis, K. G., Marras, W. S., & Waters, T. (1998) · Clinical Biomechanics · doi:10.1016/s0268-0033(97)00037-5 · Cited by 99
Evaluation of the skin sensitizing potential of biodegradable magnesium alloys
Witte, F., Abeln, I.-D., Switzer, E., Kaese, V., Meyer‐Lindenberg, A., & Windhagen, H. J. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31713 · Cited by 92
Li, Y., Hodgson, P. D., & Wen, C. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4843-3 · Cited by 85
Synthesis and properties of topologically ordered porous magnesium
Kirkland, N. T., Kolbeinsson, I., Woodfield, T. B. F., Dias, G. J., & Staiger, M. P. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.04.006 · Cited by 78
Pereda, M. D., Alonso, C., Gamero, M., del Valle, J. A., & de Mele, M. F. L. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.01.010 · Cited by 65
Koleini, S., Idris, M. H., & Jafari, H. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.06.063 · Cited by 64
Dezfuli, S. N., Huan, Z., Mol, J. M. C., Leeflang, M. A., Chang, J., & Zhou, J. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.05.021 · Cited by 57
Gu, X., Li, X., Zhou, W., et al. (2010) · Biomedical Materials · doi:10.1088/1748-6041/5/3/035013 · Cited by 36
Cited by
The role and significance of Magnesium in modern day research-A review
Prasad, S. V. S., Prasad, S. B., Verma, K., Mishra, R. K., Kumar, V., & Singh, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.05.012 · Cited by 683
Biodegradable Mg alloys for orthopedic implants – A review
Tsakiris, V., Tardei, C., & Clicinschi, F. M. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.06.024 · Cited by 612
Kabir, H., Munir, K., Wen, C., & Li, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.09.013 · Cited by 397
Magnesium matrix composites for biomedical applications: A review
Bommala, V. K., Krishna, M. G., & Rao, C. T. (2019) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2018.11.001 · Cited by 393
Biodegradable magnesium alloys as temporary orthopaedic implants: a review
Kamrani, S., & Fleck, C. (2019) · BioMetals · doi:10.1007/s10534-019-00170-y · Cited by 325
Metadata
- Authors
- Radha, R., & Sreekanth, D.
- Venue
- Journal of Magnesium and Alloys
- Publisher
- Elsevier BV
- Published
- 2017-09
- Volume
- 5
- Issue
- 3
- Pages
- 286-312
- ISSN
- 2213-9567 (ISSN-L)
- OpenAlex
- W2753373802
- Cited by
- 533
- References
- 36
- FWCI
- 12.38
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.