The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility
Open accessAbstract
Nowadays, magnesium (Mg) alloys are promising lightweight structural materials, especially in transportation and aerospace fields, due to their inherent low density and high specific strength. Most of the high-strength Mg alloys exhibit poor formability and ductility at room temperature, which limit their wide applications. However, by proper alloying design and/or delicate microstructural control, some newly developed Mg alloys, including rare-earth (RE) and RE-free ones, show enhanced ductility without significant loss of strength. To identify the critical reasons, recent researches on ductile Mg alloys have been reviewed from the aspects of alloying design strategies and microstructural control via advanced processing technologies. Moreover, some outlooks on enhanced ductility of Mg alloys are suggested, e.g. enhancing the beneficial effect of solute atoms, introducing second phase particles, tailoring bimodal-grained structures, introducing pre-twinning structures, etc. The current research progresses in alloying design and/or novel microstructural control have shed some lights on designing and producing Mg alloys with enhanced ductility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Santos, A. G., da Rocha, G. O., & de Andrade, J. B. (2019) · Scientific Reports · doi:10.1038/s41598-018-37186-2 · Cited by 8,495
High tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Latest research advances on magnesium and magnesium alloys worldwide
Song, J., She, J., Chen, D., & Pan, F. (2020) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2020.02.003 · Cited by 1,371
Research advances in magnesium and magnesium alloys worldwide in 2020
Yang, Y., Xiong, X., Chen, J., Peng, X., Chen, D., & Pan, F. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.04.001 · Cited by 970
Huang, K., Marthinsen, K., Zhao, Q., & Logé, R. E. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.004 · Cited by 788
Mechanistic origin and prediction of enhanced ductility in magnesium alloys
Wu, Z., Ahmad, R., Yin, B., Sandlöbes, S., & Curtin, W. A. (2018) · Science · doi:10.1126/science.aap8716 · Cited by 689
The role and significance of Magnesium in modern day research-A review
Prasad, S. V. S., Prasad, S. B., Verma, K., Mishra, R. K., Kumar, V., & Singh, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.05.012 · Cited by 683
Recent research and developments on wrought magnesium alloys
You, S., Huang, Y., Kainer, K. U., & Hort, N. (2017) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2017.09.001 · Cited by 652
The relation between ductility and stacking fault energies in Mg and Mg–Y alloys
Sandlöbes, S., Friák, M., Zaefferer, S., Dick, A., Yi, S., Letzig, D., Pei, Z., Zhu, L.-F., Neugebauer, J., & Raabe, D. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.02.006 · Cited by 614
Sandlöbes, S., Pei, Z., Friák, M., Zhu, L.-F., Wang, F., Zaefferer, S., Raabe, D., & Neugebauer, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.02.011 · Cited by 337
Alloy design strategies to increase strength and its trade-offs together
Han, S. Z., Choi, E., Lim, S. H., Kim, S., & Lee, J.-H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100720 · Cited by 292
Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys
Nakata, T., Xu, C., AJIMA, R., Shimizu, K., HANAKI, S., Sasaki, T., Ma, L., Hono, K., & Kamado, S. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.03.046 · Cited by 235
A rare-earth free magnesium alloy with improved intrinsic ductility
Sandlöbes, S., Friák, M., Korte-Kerzel, S., Pei, Z., Neugebauer, J., & Raabe, D. (2017) · Scientific Reports · doi:10.1038/s41598-017-10384-0 · Cited by 190
Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process
Wang, H., Yu, Z., Zhang, L., Liu, C., Zha, M., Wang, C., & Jiang, Q. (2015) · Scientific Reports · doi:10.1038/srep17100 · Cited by 189
Self-citationChen, B., Lin, D.-L., Jin, L., Zeng, X.-Q., & Lu, C. (2008) · Materials Science and Engineering: A · doi:10.1016/j.msea.2006.10.199 · Cited by 162
Processing and microstructure–property relations of high-strength low-alloy (HSLA) Mg–Zn–Ca alloys
Hofstetter, J., Rüedi, S., Baumgartner, I., Kilian, H., Mingler, B., Povoden, E., Pogatscher, S., Uggowitzer, P. J., & Löffler, J. F. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.021 · Cited by 152
Li, Y., Zha, M., Jia, H. L., Wang, S., Zhang, H., Ma, X., Tian, T., Ma, P.-K., & Wang, H. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.01.008 · Cited by 135
Self-citationJin, Z.-Z., Cheng, X., Zha, M., Rong, J. H., Zhang, H., Wang, J., Wang, C., Li, Z., & Wang, H. (2019) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2019.05.017 · Cited by 105
Self-citationLi, Y., Zha, M., Rong, J. H., Jia, H. L., Jin, Z.-Z., Zhang, H., Ma, P.-K., Xu, H., Feng, T., & Wang, H. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.01.050 · Cited by 96
Self-citationLiu, H., Sun, C., Wang, C., Li, Y., Bai, J., Xue, F., Ma, A., & Jiang, J. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.02.092 · Cited by 85
Self-citationMalik, A., Wang, Y., Huanwu, C., Nazeer, F., Ahmed, B., Khan, M. A., & Mingjun, W. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138649 · Cited by 84
Wang, P., Wang, B.-Y., Wang, C., Wang, J., Ma, C.-Y., Li, J., Zha, M., & Wang, H. (2020) · Materials Science and Engineering A · doi:10.1016/j.msea.2020.139696 · Cited by 65
Self-citationRong, J. H., Wang, P., Zha, M., Wang, C., Xu, X., Wang, H., & Jiang, Q. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.348 · Cited by 60
Self-citationZha, M., Liang, J., Xing, H., Xu, H., Jiang, B., Wang, C., Jia, H. L., & Wang, H. (2022) · Materials Science and Engineering A · doi:10.1016/j.msea.2022.142598 · Cited by 51
Self-citationYu, Z., Zha, M., Li, Z., Wang, C., Wang, H., & Jiang, Q. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.03.108 · Cited by 29
Self-citation
Cited by
Ni, B., Glaser, B., & Taheri-Mousavi, S. M. (2025) · npj Computational Materials · doi:10.1038/s41524-025-01768-2 · Cited by 23
Metadata
- Authors
- Jin, Z.-Z., Zha, M., Wang, S.-Q., Wang, S.-C., Wang, C., Jia, H.-L., & Wang, H.-Y.
- Venue
- Journal of Magnesium and Alloys
- Publisher
- Elsevier BV
- Published
- 2022-05
- Volume
- 10
- Issue
- 5
- Pages
- 1191-1206
- ISSN
- 2213-9567 (ISSN-L)
- OpenAlex
- W4281647537
- Cited by
- 289
- References
- 25
- FWCI
- 12.83
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.