The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Laser surface texturing and related techniques for enhancing tribological performance of engineering materials: A review
Abstract
Abstract Surface texturing is one of the most efficient surface modification approaches for improving the tribological performance of engineering materials. Several surface texturing techniques have been developed in recent years. Among these methods, laser surface texturing (LST) has gained considerable interests due to its high flexibility, superior texturing accuracy, and good controllability. This paper reviews the recent advances and developments of LST for enhanced tribological properties of engineering materials. The process designs of LST by means of direct laser ablation, laser interference, and laser shock processing are discussed. The effects of laser parameters on the texture features are highlighted. The enhanced tribological properties of LST-processed materials and their applications on various fields are reviewed. The current challenges and future directions of LST techniques are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Femtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Albrektsson, T., Brånemark, P.-I., Hansson, H.-A., & Lindström, J. (1981) · Acta Orthopaedica Scandinavica · doi:10.3109/17453678108991776 · Cited by 2,690
State of the Art in Laser Surface Texturing
Etsion, I. (2005) · Journal of Tribology · doi:10.1115/1.1828070 · Cited by 1,409
Laser shock processing and its effects on microstructure and properties of metal alloys: a review
Montross, C. (2002) · International Journal of Fatigue · doi:10.1016/s0142-1123(02)00022-1 · Cited by 1,111
Laser-Induced Periodic Surface Structures— A Scientific Evergreen
Bonse, J., Hohm, S., Kirner, S. V., Rosenfeld, A., & Kruger, J. (2017) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2016.2614183 · Cited by 907
Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings
Gropper, D., Wang, L., & Harvey, T. J. (2015) · Tribology International · doi:10.1016/j.triboint.2015.10.009 · Cited by 905
Principles and applications of tribology
(2013) · Choice Reviews Online · doi:10.5860/choice.51-0907 · Cited by 856
A critical assessment of surface texturing for friction and wear improvement
Gachot, C., Rosenkranz, A., Hsu, S. M., & Costa, H. L. (2016) · Wear · doi:10.1016/j.wear.2016.11.020 · Cited by 774
Analytical and Experimental Investigation of Laser-Textured Mechanical Seal Faces
Etsion, I., Kligerman, Y., & Halperin, G. (1999) · Tribology Transactions · doi:10.1080/10402009908982248 · Cited by 615
Short-pulse laser ablation of solid targets
Momma, C., Chichkov, B. N., Nolte, S., von Alvensleben, F., Tünnermann, A., Welling, H., & Wellegehausen, B. (1996) · Optics Communications · doi:10.1016/0030-4018(96)00250-7 · Cited by 558
Gujba, A., & Medraj, M. (2014) · Materials · doi:10.3390/ma7127925 · Cited by 416
Review paper: Surface Modification for Bioimplants: The Role of Laser Surface Engineering
Kurella, A., & Dahotre, N. B. (2005) · Journal of Biomaterials Applications · doi:10.1177/0885328205052974 · Cited by 409
Automobile engine tribology — approaching the surface
Priest, M., & Taylor, C. M. (2000) · Wear · doi:10.1016/s0043-1648(00)00375-6 · Cited by 405
Laser-Induced Periodic Surface Structure on Solids: A Universal Phenomenon
van Driel, H. M., Sipe, J. E., & Young, J. F. (1982) · Physical Review Letters · doi:10.1103/physrevlett.49.1955 · Cited by 404
Recent progress in multiphoton microfabrication
Maruo, S., & Fourkas, J. T. (2008) · Laser & Photonics Reviews · doi:10.1002/lpor.200710039 · Cited by 390
Yu, H., Wang, X., & Zhou, F. (2010) · Tribology Letters · doi:10.1007/s11249-009-9497-4 · Cited by 355
Borghi, A., Gualtieri, E., Marchetto, D., Moretti, L., & Valeri, S. (2008) · Wear · doi:10.1016/j.wear.2008.02.011 · Cited by 300
Multi-Scale Surface Texturing in Tribology—Current Knowledge and Future Perspectives
Grützmacher, P. G., Profito, F. J., & Rosenkranz, A. (2019) · Lubricants · doi:10.3390/lubricants7110095 · Cited by 223
Wear and friction of 6061-T6 aluminum alloy treated by laser shock processing
Sánchez-Santana, U., Rubio‐González, C., Gómez-Rosas, G., Moreno, J. L. O., Molpeceres, C., Porro, J. A., & Morales, M. (2005) · Wear · doi:10.1016/j.wear.2005.04.014 · Cited by 169
Laser Surface Engineering of Magnesium Alloys: A Review
Singh, A. K., & Harimkar, S. P. (2012) · JOM · doi:10.1007/s11837-012-0340-2 · Cited by 163
Bonse, J., Koter, R., Hartelt, M., Spaltmann, D., Pentzien, S., Höhm, S., Rosenfeld, A., & Krüger, J. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.08.111 · Cited by 161
Anno, J. N., Walowit, J. A., & Allen, C. M. (1968) · Journal of Lubrication Technology · doi:10.1115/1.3601568 · Cited by 161
Enhancement of abrasion and corrosion resistance of duplex stainless steel by laser shock peening
Lim, H., Kim, P., Jeong, H., & Jeong, S. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.01.023 · Cited by 150
Convection-Induced Patterns in Phase-Separating Polymeric Fluids
Mitov, Z., & Kumacheva, E. (1998) · Physical Review Letters · doi:10.1103/physrevlett.81.3427 · Cited by 138
Effectiveness and design of surface texturing for different lubrication regimes
Podgornik, B., Vilhena, L., Sedlaček, M., Rek, Z., & Žun, I. (2012) · Meccanica · doi:10.1007/s11012-012-9540-7 · Cited by 135
Gachot, C., Rosenkranz, A., Reinert, L., Ramos‐Moore, E., Souza, N., Müser, M. H., & Mücklich, F. (2012) · Tribology Letters · doi:10.1007/s11249-012-0057-y · Cited by 131
Aguilar‐Morales, A. I., Alamri, S., & Lasagni, A. F. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.09.039 · Cited by 115
Increasing nanohardness and reducing friction of nitride steel by laser surface texturing
Gualtieri, E., Borghi, A., Calabri, L., Pugno, N. M., & Valeri, S. (2008) · Tribology International · doi:10.1016/j.triboint.2008.09.008 · Cited by 112
Guo, Y. B., & Caslaru, R. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.12.007 · Cited by 110
Oil film lifetime and wear particle analysis of laser-patterned stainless steel surfaces
Rosenkranz, A., Heib, T., Gachot, C., & Mücklich, F. (2015) · Wear · doi:10.1016/j.wear.2015.04.006 · Cited by 102
Wang, Z., Li, Y., Bai, F., Wang, C., & Zhao, Q. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.01.034 · Cited by 101
Rajab, F. H., Liauw, C. M., Benson, P. S., Li, L., & Whitehead, K. A. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.10.008 · Cited by 101
Rosenkranz, A., Hans, M., Gachot, C., Thome, A., Bonk, S., & Mücklich, F. (2016) · Lubricants · doi:10.3390/lubricants4010002 · Cited by 93
Gradient twinning microstructure generated by laser shock peening in an AZ31B magnesium alloy
Mao, B., Liao, Y., & Li, B. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.06.176 · Cited by 89
Self-citationSurface characterization and tribological performance of laser shock peened steel surfaces
Siddaiah, A., Mao, B., Liao, Y., & Menezes, P. L. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.07.087 · Cited by 85
Self-citationBoidi, G., Tertuliano, I. S., Profito, F. J., de Rossi, W., & Machado, I. F. (2019) · Tribology International · doi:10.1016/j.triboint.2019.02.021 · Cited by 78
Contact Splitting and the Effect of Dimple Depth on Static Friction of Textured Surfaces
Greiner, C., Schäfer, M., Popp, U., & Gumbsch, P. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500879m · Cited by 72
Femtosecond laser surface structuring of silicon with Gaussian and optical vortex beams
Nivas, J. J., He, S., Song, Z., Rubano, A., Vecchione, A., Paparo, D., Marrucci, L., Bruzzese, R., & Amoruso, S. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.10.162 · Cited by 72
Laser surface texturing of Ti6Al4V alloy, stainless steel and aluminium silicon alloy
Grabowski, A., Sozańska, M., Adamiak, M., Kępińska, M., & Florian, T. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.06.060 · Cited by 59
Studies on friction and transfer layer using inclined scratch
Menezes, P. L., Kishore, K., & Kailas, S. V. (2005) · Tribology International · doi:10.1016/j.triboint.2005.04.009 · Cited by 58
Self-citationSurface texturing by indirect laser shock surface patterning for manipulated friction coefficient
Mao, B., Siddaiah, A., Menezes, P. L., & Liao, Y. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.02.041 · Cited by 58
Self-citationEnhanced room temperature stretch formability of AZ31B magnesium alloy sheet by laser shock peening
Mao, B., Li, B., Lin, D. L., & Liao, Y. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.04.054 · Cited by 52
Self-citationMicroscale Laser Shock Processing—Modeling, Testing, and Microstructure Characterization
Zhang, W., & Yao, Y. L. (2001) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(01)70128-4 · Cited by 50
Surface modification of Co–Cr–Mo implant alloy by laser interference lithography
Wei, X., Li, W., Liang, B., Li, B., Zhang, J., Zhang, L., & Wang, Z. (2016) · Tribology International · doi:10.1016/j.triboint.2016.01.039 · Cited by 48
Abnormal twin-twin interaction in an Mg-3Al-1Zn magnesium alloy processed by laser shock peening
Mao, B., Liao, Y., & Li, B. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.02.028 · Cited by 47
Self-citationFang, Y., Zhang, Y., Fan, H., et al. (2015) · Wear · doi:10.1016/j.wear.2015.04.010 · Cited by 30
Effect of Laser Shock Peening on the Wear–Corrosion Synergistic Behavior of an AZ31B Magnesium Alloy
Siddaiah, A., Mao, B., Liao, Y., & Menezes, P. L. (2019) · Journal of Tribology · doi:10.1115/1.4045500 · Cited by 28
Self-citationLu, H., Ren, S., Zhang, P., Guo, J., Li, J., & Dong, G. (2017) · RSC Advances · doi:10.1039/c7ra02387a · Cited by 26
Zhang, X., Mao, B., Siddaiah, A., Menezes, P. L., & Liao, Y. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.116333 · Cited by 24
Self-citationFriction Reduction Induced by Elliptical Surface Patterns under Lubricated Conditions
Rosenkranz, A., Szurdak, A., Grützmacher, P. G., Hirt, G., & Mücklich, F. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700731 · Cited by 22
Studies On Friction And Transfer Layer Using Inclined Scratch
(2006) · Tribology & interface engineering/Tribology and interface engineering · doi:10.1016/s0167-8922(06)80050-7 · Cited by 8
Cited by
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.06.041 · Cited by 334
Metadata
- Authors
- Mao, B., Siddaiah, A., Liao, Y., & Menezes, P. L.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 53
- Pages
- 153-173
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W3007901884
- Cited by
- 489
- References
- 51
- FWCI
- 24.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.