The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Effect of Cr addition on microstructure and welding solidification cracking susceptibility of Co-Al-W based superalloys
Abstract
Abstract The novel γ′-strengthened cobalt-base superalloys are promising candidates for high temperature materials. However, the weldability has rarely been studied. In this work, the effect of Cr addition on microstructure and solidification cracking susceptibility during tungsten inert gas welding of the Co-Al-W-xCr-0.5C (where x = 2.5, 5 and 7.5 at%, named as 2.5Cr, 5Cr and 7.5Cr) alloys were investigated. Results show that there are M6C carbide, β phase and γ/γ′ phase existed in all alloys. Cr addition promotes the precipitation of M6C carbides and changes the morphology of γ′ phases from cubic to round-cornered, which is due to the occupied lattice of W atoms by Cr atoms. In addition, the welding solidification cracks length declines significantly with increasing Cr content. Further studies by differential thermal analysis and electron back scattering diffraction show that the relative low solidification cracking susceptibility of 7.5Cr is mainly attributed to the narrow solidification temperature range, sufficient liquid phases backfilling the grain boundary in partially melted zone, serrated grain boundaries and large numbers of solidification sub-grain boundaries.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Fig.8(c) shows the weld bead characteristics of a laser-welded Al-Cu joint without Ni plating, revealing prominent cracks characteristic of solidification cracking[35].”
From Effect of nickel interlayer thickness on intermetallic compound formation and interfacial integrity in pulsed laser welding of aluminum and copper (2026) · cites this paper as [35]
Citations
Cites
Cobalt-Base High-Temperature Alloys
Sato, J., Omori, T., Oikawa, K., Ohnuma, I., Kainuma, R., & Ishida, K. (2006) · Science · doi:10.1126/science.1121738 · Cited by 1,155
Nickel based superalloy welding practices for industrial gas turbine applications
Henderson, M. B., Arrell, D. J., Larsson, R., Heobel, M., & Marchant, G. (2004) · Science and Technology of Welding & Joining · doi:10.1179/136217104225017099 · Cited by 522
High-temperature strength and deformation of γ/γ′ two-phase Co–Al–W-base alloys
Suzuki, A. (2008) · Acta Materialia · doi:10.1016/j.actamat.2007.11.014 · Cited by 465
Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants
Bauer, A., Neumeier, S., Pyczak, F., & Göken, M. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.08.036 · Cited by 297
Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
Zhang, X., Chen, H., Xu, L., Xu, J., Ren, X., & Chen, X. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108105 · Cited by 231
Effect of serrated grain boundaries on the creep property of Inconel 718 superalloy
Yeh, A., Lu, K., Kuo, C., Bor, H., & Wei, C. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.10.014 · Cited by 153
Effect of alloying on the oxidation behaviour of Co–Al–W superalloys
Yan, H., Vorontsov, V. A., & Dye, D. (2014) · Corrosion Science · doi:10.1016/j.corsci.2014.03.002 · Cited by 138
The liquation cracking behavior of IN738LC superalloy during low power Nd:YAG pulsed laser welding
Montazeri, M., & Ghaini, F. M. (2012) · Materials Characterization · doi:10.1016/j.matchar.2012.02.019 · Cited by 131
Vishwakarma, K. R., Richards, N. L., & Chaturvedi, M. C. (2007) · Materials Science and Engineering A · doi:10.1016/j.msea.2007.08.002 · Cited by 126
Hu, Y., Lin, X., Yu, X., Xu, J., Lei, M., & Huang, W. D. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.03.355 · Cited by 123
Wang, B., Lei, B., Zhu, J.-X., Feng, Q., Wang, L., & Wu, D. X. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.060 · Cited by 117
Pandey, P., Makineni, S. K., Samanta, A., Sharma, A., Das, S. M., Nithin, B., Srivastava, C., Singh, A., Raabe, D., Gault, B., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.09.049 · Cited by 105
The investigation of carbides evolution in a cobalt-base superalloy at elevated temperature
Gui, W., Zhang, H., Yang, M., Jin, T., Sun, X., & Zheng, Q. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.256 · Cited by 99
Solute partitioning and site preference in γ/γ′ cobalt-base alloys
Meher, S., Yan, H., Nag, S., Dye, D., & Banerjee, R. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.08.006 · Cited by 98
Povstugar, I., Zenk, C. H., Li, R., Choi, P., Neumeier, S., Dolotko, O., Hoelzel, M., Göken, M., & Raabe, D. (2016) · Materials Science and Technology · doi:10.1179/1743284715y.0000000112 · Cited by 95
Yang, J., Wang, Y., Li, F., Huang, W., Jing, G., Wang, Z., & Zeng, X. (2019) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2019.04.017 · Cited by 91
Son, H.-W., Lee, J., & Hyun, S. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2019.09.003 · Cited by 87
A contemporary view of cobalt-base alloys
Sims, C. T. (1969) · JOM · doi:10.1007/bf03378800 · Cited by 78
Agarwal, G., Kumar, A., Richardson, I. M., & Hermans, M. J. M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108104 · Cited by 71
Analysis of cracks in the electron beam welded joint of K465 nickel-base superalloy
Han, K., Wang, H., Shen, L., & Zhang, B. (2018) · Vacuum · doi:10.1016/j.vacuum.2018.08.011 · Cited by 55
Microstructure and Mechanical Properties of Fiber Laser Welded GH3535 Superalloy
Yu, K., Jiang, Z., Li, C., Chen, S., Tao, W., Zhou, X., & Li, Z. (2016) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2016.11.026 · Cited by 52
Yu, K., Jiang, Z., Leng, B., Li, C., Chen, S., Tao, W., Zhou, X., & Li, Z. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.01.029 · Cited by 51
Wear properties of AISI 1015 steel coated with Stellite 6 by microlaser welding
Apay, S., & Gülenç, B. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.09.056 · Cited by 48
Klein, L., von Bartenwerffer, B., Killian, M. S., Schmuki, P., & Virtanen, S. (2013) · Corrosion Science · doi:10.1016/j.corsci.2013.10.022 · Cited by 45
Welding solidification cracking susceptibility and behavior of a Ni-28W-6Cr alloy
Chen, S., Ye, X., Tsang, D. K. L., Jiang, L., Yu, K., Li, C., & Li, Z. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.09.013 · Cited by 42
Chen, Y., Xue, F., Wang, C., Li, X., Deng, Q., Yang, X., Long, H., Li, W. N., Yang, L., & Li, A. (2019) · Corrosion Science · doi:10.1016/j.corsci.2019.108179 · Cited by 39
Costa, A. M. D. S., Oliveira, J. P., Salgado, M. V. S., Nunes, C. Â., Lopes, É. S. N., Mogili, N. V. V., Ramirez, A. J., & Tschiptschin, A. P. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.05.078 · Cited by 37
Secondary M6C precipitation in K40S cobalt-base alloy
Yang, F., Sun, X., Zhang, W., Kang, Y. P., Guan, H. R., & Hu, Z. Q. (2001) · Materials Letters · doi:10.1016/s0167-577x(00)00361-x · Cited by 35
Solidification behavior of inconel 713LC gas turbine blades during electron beam welding
Keshavarz, M. K., Turenne, S., & Bonakdar, A. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2017.11.021 · Cited by 34
Na, Z., Fu, H., Zhou, X., Zhang, Y., & Xie, J. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.09.058 · Cited by 33
Ojo, O. A. (2007) · Materials Science and Technology · doi:10.1179/174328407x213323 · Cited by 32
Secondary M6C Precipitation in a Cobalt–base Superalloy
Jiang, W., Yao, X., Guan, H. R., & Hu, Z. Q. (1999) · Journal of Materials Science Letters · doi:10.1023/a:1006627122234 · Cited by 30
Zhang, Y., Wang, T., Jiang, S., Zhang, B., Wang, Y., & Feng, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.03.008 · Cited by 30
Xiao, W., Xu, M., Chen, J., Yu, C., Chen, J., Lü, H., & Xu, J. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.08.024 · Cited by 27
Liu, J., Yu, J., Yang, Y., Zhou, Y., & Sun, X. F. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.11.087 · Cited by 26
Self-citationAzimzadegan, T., & Mousavi, S. A. A. A. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.06.005 · Cited by 23
Effect of serrated grain boundary on stress corrosion cracking of Alloy 600
Kim, H. P., Choi, M., Kim, S. W., Kim, D. J., Lim, Y. S., & Hwang, S. S. (2018) · Nuclear Engineering and Technology · doi:10.1016/j.net.2018.05.009 · Cited by 20
SZALA, J., Szczotok, A., Richter, J., Cwajna, J., & Maciejny, A. (2006) · Materials Characterization · doi:10.1016/j.matchar.2005.11.015 · Cited by 17
Odabaşı, A., Ünlü, N., Göller, G., Kayali, E. S., & Eruslu, N. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.09.017 · Cited by 16
Yin, H., Gao, Y., & Gu, Y. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.09.121 · Cited by 13
Molleda, F., Molleda, F., Mora, J., Molleda, F., Molleda, F., Mora, E., Carrillo, E., & Mellor, B. G. (2006) · Materials Characterization · doi:10.1016/j.matchar.2006.01.016 · Cited by 11
Effect of Cr on eutectic phase formation and solidification temperature range in Ni–Cr–Hf system
Feng, X., Hope, A. T., & Lippold, J. C. (2013) · Materials Letters · doi:10.1016/j.matlet.2013.10.115 · Cited by 9
Chen, S., Hu, H., Zhao, M., & Rong, L. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.01.127 · Cited by 9
Microstructure and wear resistance of TIG cladding novel Co-9Al-7.5W superalloy
Yang, X., Tian, X., Xiao, W., & Alloys, M. (2013) · Cited by 2
Improvement of Low-cycle Fatigue Strength by Serrated Grain Boundary
IIZUKA, H., Tanaka, M., & Ashihara, F. (1989) · Elsevier eBooks · doi:10.1016/b978-0-08-034804-9.50107-8 · Cited by 1
Cited by
Singh, R., Arora, N., & Choudhary, A. (2026) · Welding in the World · doi:10.1007/s40194-026-02375-5 · Cited by 6
“Figure 8(c) shows the weld bead characteristics of a laser-welded Al-Cu joint without Ni plating, revealing prominent cracks characteristic of solidification cracking [35].”
Metadata
- Authors
- Liu, C., Sun, Y., Wen, M., He, T., & Yu, J.
- Affiliations
- University of Science and Technology of China (CN)
- Chinese Academy of Sciences (CN)
- Northeastern University (CN)
- Corresponding author
- Sun, Yuan
- Yu, Jinjiang
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 56
- Pages
- 820-829
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W3014123941
- Cited by
- 27
- References
- 45
- Citations by year
- 2026: 6 · 2025: 4 · 2024: 3 · 2023: 3 · 2022: 3 · 2021: 7 · 2020: 1
- FWCI
- 1.72
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Journal of Manufacturing Processes (publishedVersion)
- Funders
- National Natural Science Foundation of China (51971214, 51771191)
- Aeronautics Power Foundation of China (DLJJ1825)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
- Physical Sciences › Engineering › Mechanical Engineering › High Entropy Alloys Studies
- Keywords
- cobalt-based superalloys, Co-Al-W superalloys, chromium addition, hot cracking, TIG welding, weldability, M6C carbides, solidification range, serrated grain boundaries, microstructure
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.