The DOI matches its Crossref record; 179 of the 179 references it cites were found in a registry or an index.
Metal additive manufacturing: Technology, metallurgy and modelling
Abstract
Abstract This paper provides a comprehensive review of metal additive manufacturing, a rapidly evolving field with innovative technologies and processes. The purpose of this review paper is to provide a complete picture of the current research on metal AM and its capabilities. An overview of metal AM and the current processing methods are provided, along with a brief introduction to the complex physics behind the melt pool formation. Common metal AM characteristic defects are discussed as well as the current metals and alloys that are commercially available. Furthermore, process optimization techniques and computational modelling methods are reviewed. Lastly, various post-processing methods to improve surface roughness, mechanical properties and dimensional precision are discussed. Although the library for printable alloys is increasing, there is still a need for alloy development outside of the commercial setting. Furthermore, there is currently not a complete numerical model of the AM process which is mainly due to the computational costs. Although metal AM is still in its infancy, the frequency and significance of new developments are driving AM to mainstream adoption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
A new finite element model for welding heat sources
Goldak, J., Chakravarti, A., & Bibby, M. (1984) · Metallurgical Transactions B · doi:10.1007/bf02667333 · Cited by 3,374
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Designing metallic glass matrix composites with high toughness and tensile ductility
Hofmann, D. C., Suh, J.-Y., Wiest, A., Duan, G., Lind, M.-L., Demetriou, M. D., & Johnson, W. L. (2008) · Nature · doi:10.1038/nature06598 · Cited by 1,501
Steady state columnar and equiaxed growth of dendrites and eutectic
Hunt, J. D. (1984) · Materials Science and Engineering · doi:10.1016/0025-5416(84)90201-5 · Cited by 1,470
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Read, N., Wang, W., Essa, K., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.044 · Cited by 1,218
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Qiu, C., Panwisawas, C., Ward, R., Basoalto, H., Brooks, J. W., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.004 · Cited by 1,041
Gong, H., Rafi, K., Gu, H., Starr, T., & Stucker, B. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.002 · Cited by 1,038
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Defect formation mechanisms in selective laser melting: a review
Zhang, B., Li, Y., & Bai, Q. (2017) · Chinese Journal of Mechanical Engineering · doi:10.1007/s10033-017-0121-5 · Cited by 924
Jia, Q., & Gu, D. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.09.171 · Cited by 905
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
Dinda, G. P., Dasgupta, A. K., & Mazumder, J. (2009) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.01.009 · Cited by 858
Mechanical Properties of AlSi10Mg Produced by Selective Laser Melting
Kempen, K., Thijs, L., Van Humbeeck, J., & Kruth, J.-P. (2012) · Physics Procedia · doi:10.1016/j.phpro.2012.10.059 · Cited by 849
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.04.099 · Cited by 821
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Leung, C. L. A., Marussi, S., Atwood, R. C., Towrie, M., Withers, P. J., & Lee, P. D. (2018) · Nature Communications · doi:10.1038/s41467-018-03734-7 · Cited by 817
An improved prediction of residual stresses and distortion in additive manufacturing
Mukherjee, T., Zhang, W., & DebRoy, T. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2016.10.003 · Cited by 812
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Gokuldoss, P. K., Kolla, S., & Eckert, J. (2017) · Materials · doi:10.3390/ma10060672 · Cited by 804
Hardened austenite steel with columnar sub-grain structure formed by laser melting
Saeidi, K., Gao, X., Zhong, Y., & Shen, Z. J. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.12.018 · Cited by 796
Wang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 789
Zhao, C., Fezzaa, K., Cunningham, R. W., Wen, H., De Carlo, F., Chen, L., Rollett, A. D., & Sun, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-03761-2 · Cited by 758
Surface texture metrology for metal additive manufacturing: a review
Townsend, A., Senin, N., Blunt, L., Leach, R. K., & Taylor, J. S. (2016) · Precision Engineering · doi:10.1016/j.precisioneng.2016.06.001 · Cited by 743
Parry, L., Ashcroft, I. A., & Wildman, R. D. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.05.014 · Cited by 739
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
Melt pool temperature and cooling rates in laser powder bed fusion
Hooper, P. A. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.05.032 · Cited by 707
Roberts, I. A., Wang, C., Esterlein, R., et al. (2009) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2009.07.004 · Cited by 705
Xu, W., Lui, E. W., Pateras, A., Qian, M., & Brandt, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.027 · Cited by 687
Aboulkhair, N. T., Maskery, I., Tuck, C., Ashcroft, I., & Everitt, N. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.04.092 · Cited by 675
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Wu, A. S., Brown, D. W., Kumar, M., Gallegos, G. F., & King, W. E. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-014-2549-x · Cited by 657
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
Mesoscopic simulation model of selective laser melting of stainless steel powder
Khairallah, S. A., & Anderson, A. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.001 · Cited by 616
Spierings, A. B., Herres, N., & Levy, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111124770 · Cited by 614
Tammas-Williams, S., Zhao, H., Léonard, F., Derguti, F., Todd, I., & Prangnell, P. B. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.02.008 · Cited by 590
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.10.075 · Cited by 580
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Takata, N., Kodaira, H., Sekizawa, K., Suzuki, A., & Kobashi, M. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.08.029 · Cited by 574
Trosch, T., Strößner, J., Völkl, R., & Glatzel, U. (2016) · Materials Letters · doi:10.1016/j.matlet.2015.10.136 · Cited by 556
Wang, T., Zhu, Y. Y., Zhang, S. Q., et al. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.01.256 · Cited by 530
Modeling metal deposition in heat transfer analyses of additive manufacturing processes
Michaleris, P. (2014) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2014.04.003 · Cited by 527
Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
Li, S., Wei, Q., Shi, Y., Zhu, Z., & Zhang, D. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2014.09.020 · Cited by 526
Printability of alloys for additive manufacturing
Mukherjee, T., Zuback, J. S., De, A., & DebRoy, T. (2016) · Scientific Reports · doi:10.1038/srep19717 · Cited by 523
X-ray computed tomography for additive manufacturing: a review
Thompson, A., Maskery, I., & Leach, R. K. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/7/072001 · Cited by 521
Characterization of Metal Powders Used for Additive Manufacturing
Slotwinski, J. A., Garboczi, E. J., Stutzman, P. E., Ferraris, C. F., Watson, S. S., & Peltz, M. A. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.018 · Cited by 506
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
Takaichi, A., Suyalatu, Nakamoto, T., Joko, N., Nomura, N., Tsutsumi, Y., Migita, S., Doi, H., Kurosu, S., Chiba, A., et al. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.01.021 · Cited by 489
Processing and biocompatibility evaluation of laser processed porous titanium
Xue, W., Krishna, B. V., Bandyopadhyay, A., & Bose, S. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.05.009 · Cited by 471
Murr, L. E., Martinez, E., Amato, K. N., Gaytan, S. M., Hernandez, J., Ramirez, D. A., Shindo, P. W., Medina, F., & Wicker, R. B. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70009-1 · Cited by 470
Modeling of additive manufacturing processes for metals: Challenges and opportunities
Francois, M. M., Sun, A., King, W. E., Henson, N. J., Tourret, D., Bronkhorst, C. A., Carlson, N. N., Newman, C. K., Haut, T., Bakosi, J., et al. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.001 · Cited by 462
Keller, T., Lindwall, G., Ghosh, S., Ma, L., Lane, B. M., Zhang, F., Kattner, U. R., Lass, E. A., Heigel, J. C., Idell, Y., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.003 · Cited by 457
Processing metallic glasses by selective laser melting
Pauly, S., Löber, L., Petters, R., Stoica, M., Scudino, S., Kühn, U., & Eckert, J. (2013) · Materials Today · doi:10.1016/j.mattod.2013.01.018 · Cited by 446
Stainless Steels for Design Engineers
McGuire, M. F. (2008) · ASM International eBooks · doi:10.31399/asm.tb.ssde.9781627082860 · Cited by 442
Clijsters, S., Craeghs, T., Buls, S., Kempen, K., & Kruth, J.-P. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6214-8 · Cited by 437
Microstructures of laser-deposited Ti–6Al–4V
Wu, X., Liang, J., Mei, J., Mitchell, C., Goodwin, P. S., & Voice, W. (2004) · Materials & Design · doi:10.1016/j.matdes.2003.09.009 · Cited by 436
Song, B., Zhao, X., Li, S., Han, C., Wei, Q., Wen, S., Liu, J., & Shi, Y. (2015) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-015-0341-2 · Cited by 427
Fatigue performance of additive manufactured metallic parts
Spierings, A. B., Starr, T. L., & Wegener, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311302932 · Cited by 426
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Murr, L. E., Martinez, E., Hernandez, J., Collins, S., Amato, K. N., Gaytan, S. M., & Shindo, P. W. (2012) · Journal of Materials Research and Technology · doi:10.1016/s2238-7854(12)70029-7 · Cited by 425
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.03.006 · Cited by 423
Casalino, G., Campanelli, S. L., Contuzzi, N., & Ludovico, A. D. (2015) · Optics & Laser Technology · doi:10.1016/j.optlastec.2014.07.021 · Cited by 412
Loh, L.-E., Chua, C.-K., Yeong, W.-Y., Song, J., Mapar, M., Sing, S.-L., Liu, Z.-H., & Zhang, D.-Q. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.09.014 · Cited by 408
Wetland Degradation and Ecological Restoration
Bai, J., Cui, B., Cao, H., Li, A., & Zhang, B. (2013) · The Scientific World Journal · doi:10.1155/2013/523632 · Cited by 406
Shevchik, S. A., Kenel, C., Leinenbach, C., & Wasmer, K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.012 · Cited by 403
AlMangour, B., & Yang, J.-M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.037 · Cited by 389
A model of deep penetration laser welding based on calculation of the keyhole profile
Kaplan, A. F. H. (1994) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/27/9/002 · Cited by 378
Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
Pegues, J., Roach, M., Scott Williamson, R., & Shamsaei, N. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.013 · Cited by 378
Duda, T., & Raghavan, L. V. (2016) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2016.11.111 · Cited by 374
Simulation of metal additive manufacturing microstructures using kinetic Monte Carlo
Rodgers, T. M., Madison, J. D., & Tikare, V. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2017.03.053 · Cited by 369
Bartolomeu, F., Buciumeanu, M., Pinto, E., Alves, N., Carvalho, O., Silva, F. S., & Miranda, G. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.007 · Cited by 364
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
Basak, A., & Das, S. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031728 · Cited by 363
Yan, C., Hao, L., Hussein, A., Bubb, S. L., Young, P., & Raymont, D. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.12.004 · Cited by 362
Hot isostatic pressing of IN718 components manufactured by selective laser melting
Tillmann, W., Schaak, C., Nellesen, J., Schaper, M., Aydinöz, M. E., & Hoyer, K.-P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.006 · Cited by 353
Gunenthiram, V., Peyre, P., Schneider, M., Dal, M., Coste, F., Koutiri, I., & Fabbro, R. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.08.012 · Cited by 345
Characterization and Control of Powder Properties for Additive Manufacturing
Strondl, A., Lyckfeldt, O., Brodin, H., & Ackelid, U. (2015) · JOM · doi:10.1007/s11837-015-1304-0 · Cited by 340
Prediction of microstructure in laser powder bed fusion process
Acharya, R., Sharon, J. A., & Staroselsky, A. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.018 · Cited by 331
Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication
Murr, L. E. (2016) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2016.08.011 · Cited by 329
Beese, A. M., & Carroll, B. E. (2015) · JOM · doi:10.1007/s11837-015-1759-z · Cited by 326
Analytical and numerical modelling of the direct metal deposition laser process
Peyre, P., Aubry, P., Fabbro, R., Neveu, R., & Longuet, A. (2008) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/41/2/025403 · Cited by 323
Bai, Y., Wagner, G., & Williams, C. B. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036640 · Cited by 314
Damage evolution and failure mechanisms in additively manufactured stainless steel
Carlton, H. D., Haboub, A., Gallegos, G. F., Parkinson, D. Y., & MacDowell, A. A. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.073 · Cited by 313
Maamoun, A. H., Xue, Y. F., Elbestawi, M. A., & Veldhuis, S. C. (2018) · Materials · doi:10.3390/ma11122343 · Cited by 311
Uddin, S. Z., Murr, L. E., Terrazas, C. A., Morton, P. A., Roberson, D. A., & Wicker, R. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.047 · Cited by 310
Part and material properties in selective laser melting of metals
Kruth, J., Badrossamay, M., Yasa, E., Deckers, J. P., Thijs, L., & Humbeeck, J. V. (2010) · Lirias · Cited by 303
Mertens, R., Vrancken, B., Holmstock, N., Kinds, Y., Kruth, J.-P., & Van Humbeeck, J. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.092 · Cited by 301
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.05.002 · Cited by 288
Manvatkar, V., De, A., & DebRoy, T. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000701 · Cited by 282
Selective laser melting of Invar 36: Microstructure and properties
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.10.020 · Cited by 277
Sun, Y., Hebert, R. J., & Aindow, M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.07.015 · Cited by 277
Uzan, N. E., Ramati, S., Shneck, R., Frage, N., & Yeheskel, O. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.030 · Cited by 274
An exploration of binder jetting of copper
Bai, Y., & Williams, C. B. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2014-0180 · Cited by 270
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3429-3 · Cited by 269
Laser polishing of parts built up by selective laser sintering
Lamikiz, A., Sánchez, J. A., López de Lacalle, L. N., & Arana, J. L. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.01.013 · Cited by 264
Modelling and simulation of electron beam melting
Zäh, M. F., & Lutzmann, S. (2010) · Production Engineering · doi:10.1007/s11740-009-0197-6 · Cited by 263
Jägle, E., Sheng, Z., Kürnsteiner, P., Ocylok, S., Weisheit, A., & Raabe, D. (2016) · Materials · doi:10.3390/ma10010008 · Cited by 262
Laser polishing of 3D printed mesoscale components
Bhaduri, D., Penchev, P., Batal, A., Dimov, S., Soo, S. L., Sten, S., Harrysson, U., Zhang, Z., & Dong, H. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.211 · Cited by 257
Girelli, L., Tocci, M., Gelfi, M., & Pola, A. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.10.026 · Cited by 255
Nandwana, P., Elliott, A. M., Siddel, D., Merriman, A., Peter, W. H., & Babu, S. S. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.002 · Cited by 249
Metallurgy of additive manufacturing: Examples from electron beam melting
Murr, L. E. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.002 · Cited by 247
Rosenthal, I., Stern, A., & Frage, N. (2014) · Metallography Microstructure and Analysis · doi:10.1007/s13632-014-0168-y · Cited by 240
Process planning for additive and subtractive manufacturing technologies
Newman, S. T., Zhu, Z., Dhokia, V., & Shokrani, A. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.04.109 · Cited by 231
Ramirez, D. A., Murr, L. E., Martinez, E., Hernandez, D. H., Martinez, J. L., Machado, B. I., Medina, F., Frigola, P., & Wicker, R. B. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.03.033 · Cited by 217
Current Trends of Additive Manufacturing in the Aerospace Industry
Kumar, L. J., & Krishnadas Nair, C. G. (2017) · Advances in 3D Printing & Additive Manufacturing Technologies · doi:10.1007/978-981-10-0812-2_4 · Cited by 210
Gockel, J., Beuth, J., & Taminger, K. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.09.004 · Cited by 209
On thermal modeling of Additive Manufacturing processes
Foteinopoulos, P., Papacharalampopoulos, A., & Stavropoulos, P. (2018) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2017.09.007 · Cited by 206
Phase field simulation of powder bed-based additive manufacturing
Lu, L., Sridhar, N., & Zhang, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.11.033 · Cited by 206
A Review on Melt‐Pool Characteristics in Laser Welding of Metals
Fotovvati, B., Wayne, S. F., Lewis, G., & Asadi, E. (2018) · Advances in Materials Science and Engineering · doi:10.1155/2018/4920718 · Cited by 202
Pang, S., Chen, X., Zhou, J., et al. (2015) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2015.05.003 · Cited by 201
Process development toward full-density stainless steel parts with binder jetting printing
Do, T., Kwon, P., & Shin, C. S. (2017) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2017.04.006 · Cited by 201
Selective Laser Melting of Pure Copper
Ikeshoji, T.-T., Nakamura, K., Yonehara, M., Imai, K., & Kyogoku, H. (2018) · JOM · doi:10.1007/s11837-017-2695-x · Cited by 199
Powder bed binder jet printed alloy 625: Densification, microstructure and mechanical properties
Mostafaei, A., Stevens, E. L., Hughes, E. T., Biery, S. D., Hilla, C., & Chmielus, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.067 · Cited by 192
Helmer, H. E., Körner, C., & Singer, R. F. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.192 · Cited by 189
3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
Koepf, J. A., Gotterbarm, M. R., Markl, M., & Körner, C. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.04.030 · Cited by 188
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
Jägle, E. A., Sheng, Z., Wu, L., Lu, L., Risse, J., Weisheit, A., & Raabe, D. (2016) · JOM · doi:10.1007/s11837-015-1764-2 · Cited by 187
Gonzalez, J. A., Mireles, J., Stafford, S. W., Perez, M. A., Terrazas, C. A., & Wicker, R. B. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.08.031 · Cited by 186
Urlea, V., & Brailovski, V. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.11.014 · Cited by 177
AlMangour, B., Grzesiak, D., & Yang, J.-M. (2017) · Powder Technology · doi:10.1016/j.powtec.2016.12.073 · Cited by 176
Further studies in selective laser melting of stainless and tool steel powders
Badrossamay, M., & Childs, T. H. C. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.09.013 · Cited by 174
Solid Freeform Fabrication Proceedings -1999
Bourell, D. L., Beaman, J. J., Jr., C., Richard H., M., Harris L., B., & Joel, W. (1999) · doi:10.21236/ada377264 · Cited by 173
Gu, H., Gong, H., Pal, D., Rafi, K., Starr, T. L., & Stucker, B. E. (2013) · doi:10.26153/tsw/15572 · Cited by 166
Simulation of Laser Beam Melting of Steel Powders using the Three-Dimensional Volume of Fluid Method
Gürtler, F.-J., Karg, M., Leitz, K.-H., & Schmidt, M. (2013) · Physics Procedia · doi:10.1016/j.phpro.2013.03.162 · Cited by 165
Experimental study and modeling of H13 steel deposition using laser hot-wire additive manufacturing
Nie, Z., Wang, G., McGuffin-Cawley, J. D., et al. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.04.006 · Cited by 162
Engineering Mathematics: Programmes and Problems
Stroud, K. A. (1970) · doi:10.1007/978-1-349-15394-7 · Cited by 159
Shunmugavel, M., Polishetty, A., & Littlefair, G. (2015) · Procedia Technology · doi:10.1016/j.protcy.2015.07.037 · Cited by 157
Microstructure and mechanical property considerations in additive manufacturing of aluminum alloys
Ding, Y., Muñiz-Lerma, J. A., Trask, M., et al. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.214 · Cited by 154
Selective laser melting of pure tantalum: Densification, microstructure and mechanical behaviors
Zhou, L., Yuan, T., Li, R., Tang, J., Wang, G., & Guo, K. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.09.083 · Cited by 153
Energy consumption model of Binder-jetting additive manufacturing processes
Xu, X. S., Meteyer, S., Perry, N., et al. (2014) · International Journal of Production Research · doi:10.1080/00207543.2014.937013 · Cited by 152
Srivatsan, T. S., & Sudarshan, T. S. (2015) · CRC Press eBooks · doi:10.1201/b19360 · Cited by 151
Javidani, M., Arreguin-Zavala, J., Danovitch, J., Tian, Y., & Brochu, M. (2016) · Journal of Thermal Spray Technology · doi:10.1007/s11666-016-0495-4 · Cited by 144
Real-time control of microstructure in laser additive manufacturing
Farshidianfar, M. H., Khajepour, A., & Gerlich, A. P. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7423-5 · Cited by 143
Additive Manufacturing of Metals: A Review
Herderick, E. D. (2011) · Cited by 140
Lundbäck, A., & Lindgren, L. (2011) · Finite Elements in Analysis and Design · doi:10.1016/j.finel.2011.05.005 · Cited by 132
Effects of Ni and Mo on the microstructure and some other properties of Co–Cr dental alloys
Matković, T., Matković, P., & Malina, J. (2003) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2003.07.004 · Cited by 127
Thermal expansion coefficients in Invar processed by selective laser melting
Harrison, N. J., Todd, I., & Mumtaz, K. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1169-4 · Cited by 117
Santos, E. C., Osakada, K., Shiomi, M., Kitamura, Y., & Abe, F. (2004) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/0954406041319545 · Cited by 116
The effects of Hot Isostatic Pressing on parts fabricated by binder jetting additive manufacturing
Kumar, A. Y., Bai, Y., Eklund, A., & Williams, C. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.09.021 · Cited by 116
Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders
Pinkerton, A. J., & Li, L. (2004) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-003-1844-2 · Cited by 112
Dinwiddie, R. B., Dehoff, R., Lloyd, P. D., Lowe, L. E., & Ulrich, J. B. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2018412 · Cited by 112
High-power laser-matter interaction during laser powder bed fusion
Yin, J., Yang, L., Xu, Y., Zhu, H., Wang, D., Ke, L., Wang, Z., Wang, G., & Zeng, X. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100778 · Cited by 107
Microfluidics: Modelling, Mechanics and Mathematics
(2016) · Elsevier eBooks · doi:10.1016/c2012-0-02230-2 · Cited by 107
Wheat, E., Vlasea, M., Hinebaugh, J., & Metcalfe, C. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.038 · Cited by 103
The production of copper parts using DMLR
Pogson, S. R., Fox, P., Sutcliffe, C. J., & O’Neill, W. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310502239 · Cited by 99
Cottam, R. E., Wang, J., & Luzin, V. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.190 · Cited by 98
Bisht, M., Ray, N., Verbist, F., & Coeck, S. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.004 · Cited by 95
Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing
Rishmawi, I., Salarian, M., & Vlasea, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.10.015 · Cited by 91
Effect of Melt Scan Rate on Microstructure and Macrostructure for Electron Beam Melting of Ti-6Al-4V
Puebla, K., Murr, L. E., Gaytan, S. M., Martinez, E., Medina, F. R., & Wicker, R. B. (2012) · Materials Sciences and Applications · doi:10.4236/msa.2012.35038 · Cited by 85
Rońda, J., & Oliver, G. J. (2000) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(99)00461-2 · Cited by 85
Selective Laser Melting (SLM) of pure gold
Khan, M., & Dickens, P. (2010) · Gold bulletin · doi:10.1007/bf03214976 · Cited by 84
Additive manufacturing of a novel Ti-Al-V-Fe alloy using selective laser melting
Azizi, H., Zurob, H. S., Bose, B., Ghiaasiaan, R., Wang, X., Coulson, S., Duz, V., & Phillion, A. B. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.006 · Cited by 82
Numerical methods for microstructural evolutions in laser additive manufacturing
Zhang, Z., Tan, Z., Yao, X., Hu, C., Ge, P., Wan, Z. Y., Li, J. Y., & Wu, Q. (2018) · Computers & Mathematics with Applications · doi:10.1016/j.camwa.2018.07.011 · Cited by 81
Tan, X., Wang, P., Kok, Y., Toh, W. Q., Sun, Z., Nai, M. L. S., Descoins, M., Mangelinck, D., Liu, E., & Tor, S. B. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.09.022 · Cited by 79
Advances in Maraging Steels for Additive Manufacturing
Türk, C., Zunko, H., Aumayr, C., Leitner, H., & Kapp, M. (2019) · BHM Berg- und Hüttenmännische Monatshefte · doi:10.1007/s00501-019-0835-z · Cited by 77
Matilainen, V., Piili, H., Salminen, A., & Nyrhilä, O. (2015) · Physics Procedia · doi:10.1016/j.phpro.2015.11.052 · Cited by 68
Li, G., Li, J., Tian, X., Cheng, X., He, B., & Wang, H. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.11.084 · Cited by 66
Dörfert, R., Zhang, J., Clausen, B., Freiße, H., Schumacher, J., & Vollertsen, F. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.01.010 · Cited by 57
Jerrard, P. G. E., Hao, L., & Evans, K. E. (2009) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1574 · Cited by 54
Sun, L. H., Kim, Y.-H., Kim, D., et al. (2009) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4000335 · Cited by 37
Palumbo, B., Re, F. D., Martorelli, M., Lanzotti, A., & Corrado, P. (2017) · Materials · doi:10.3390/ma10020144 · Cited by 37
Modelling of the Fraction of Martensite in Low-alloy Steels
Huyan, F., Hedström, P., & Borgenstam, A. (2015) · Materials Today Proceedings · doi:10.1016/j.matpr.2015.07.347 · Cited by 29
The Coupled CFD-FEM Model of Electron Beam Melting® (EBM)
Jamshidinia, M., Kong, F., & Kovacevic, R. (2013) · Cited by 14
Cited by
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Metadata
- Authors
- Cooke, S., Ahmadi, K., Willerth, S., & Herring, R.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 57
- Pages
- 978-1003
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W3048348312
- Cited by
- 378
- References
- 179
- FWCI
- 21.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.