The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
4D printing of shape memory polylactic acid (PLA) components: Investigating the role of the operational parameters in fused deposition modelling (FDM)
Open accessAbstract
Abstract Shape Memory Polymers (SMPs) are attracting considerable interest both in the scientific and industrial fields. Among them, polylactic acid (PLA) is particularly appreciated, as it is a bioderivation polymer, biodegradable and compostable with high thicknesses, with excellent shape memory properties, which can be activated by varying the temperature of the material across the glass transition temperature. In this study, PLA is used in the 4D printing process for the manufacturing of complex geometry components by Fused Deposition Modelling (FDM), with a potential as stress-absorbers. The shape memory properties of the manufactured component have been tested varying the operational parameters of the printing process (i.e., the temperature at the nozzle, the deposition speed, the layer thickness) as well as the activation temperature that allows the recovery of the initial shape. In particular, the time needed to recover the shape and the percentage of recovery with respect to the initial shape were assessed. Experimental results have shown that PLA components have adequate shape memory properties, with short recovery times and high recovery rates being easily achievable. Among process parameters, the activation temperature is found to be the most significant parameter to trigger the recovery of the initial shape in the shortest possible time.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique
Zhang, Q., Yan, D., Zhang, K., & Hu, G. (2015) · Scientific Reports · doi:10.1038/srep08936 · Cited by 188
Cited by
Poly(butylene succinate) (PBS): Materials, processing, and industrial applications
Barletta, M., Aversa, C., Ayyoob, M., Gisario, A., Hamad, K., Mehrpouya, M., & Vahabi, H. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101579 · Cited by 443
Self-citationKhalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
4D printing of shape memory polylactic acid (PLA)
Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S. (2021) · Polymer · doi:10.1016/j.polymer.2021.124080 · Cited by 258
Self-citation4D printing: Perspectives for the production of sustainable plastics for agriculture
Maraveas, C., Bayer, I. S., & Bartzanas, T. (2022) · Biotechnology Advances · doi:10.1016/j.biotechadv.2021.107785 · Cited by 63
Ponticelli, G. S., Tagliaferri, F., Venettacci, S., Horn, M., Giannini, O., & Guarino, S. (2021) · Applied Sciences · doi:10.3390/app11167375 · Cited by 23
Metadata
- Authors
- Barletta, M., Gisario, A., & Mehrpouya, M.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 61
- Pages
- 473-480
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W3112140910
- Cited by
- 194
- References
- 2
- FWCI
- 8.08
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 4D printing of shape memory polylactic acid (PLA) components: Investigating the role of the operational parameters in fused deposition modelling (FDM). https://app.cochat.ai/papers/10.1016/j.jmapro.2020.11.036
- The paper
- Barletta, M., Gisario, A., & Mehrpouya, M. (2021). 4D printing of shape memory polylactic acid (PLA) components: Investigating the role of the operational parameters in fused deposition modelling (FDM). Journal of Manufacturing Processes. https://doi.org/10.1016/j.jmapro.2020.11.036
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.