The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Dependence of mechanical properties of polyamide components on build parameters in the SLS process
Open accessAbstract
Abstract Customised properties of parts manufactured using the selective laser sintering process are achievable by variation of build parameters. The energy density, controlled by laser power, distance between scan lines and speed of the laser beam across the powder bed, all have a very strong influence on the density and the mechanical behaviour of the parts. The present paper investigates the influence of the energy density on physical and mechanical properties of parts produced using polyamide. Additionally, the effect of part orientation during the build is examined. Knowledge of the influence of these parameters allows one to establish trendlines which link build settings to resulting part properties, and hence to fabricate customised parts with predetermined properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Scaffold development using 3D printing with a starch-based polymer
Lam, C. X. F., Mo, X. M., Teoh, S. H., & Hutmacher, D. W. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00012-7 · Cited by 614
Sintering of commercially pure titanium powder with a Nd:YAG laser source
Fischer, P., Romano, V., Weber, H. P., Karapatis, N. P., Boillat, É., & Glardon, R. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00567-0 · Cited by 365
Effects of energy density on morphology and properties of selective laser sintered polycarbonate
Ho, H. C. H., Gibson, I., & Cheung, W. L. (1999) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(99)00007-2 · Cited by 167
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Metadata
- Authors
- Caulfield, B., McHugh, P. E., & Lohfeld, S.
- Venue
- Journal of Materials Processing Technology
- Publisher
- Elsevier BV
- Published
- 2007-02
- Volume
- 182
- Issue
- 1-3
- Pages
- 477-488
- ISSN
- 0924-0136 (ISSN-L)
- OpenAlex
- W2077862115
- Cited by
- 598
- References
- 3
- FWCI
- 26.21
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.