Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Physical properties of polymers handbook

Mark, J. (2007) · Springer eBooks · doi:10.1007/978-0-387-69002-5 · Cited by 1,670

The morphology of poly(aryl-ether-ether-ketone)

Blundell, D. J., & Osborn, B. N. (1983) · Polymer · doi:10.1016/0032-3861(83)90144-1 · Cited by 1,064

A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness

Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 771

Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing

Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 608

Extrusion-based additive manufacturing of PEEK for biomedical applications

Vaezi, M., & Yang, S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097053 · Cited by 418

Mechanical impact behavior of polyether–ether–ketone (PEEK)

Garcia‐Gonzalez, D., Rusinek, A., Jankowiak, T., & Árias, A. (2015) · Composite Structures · doi:10.1016/j.compstruct.2014.12.061 · Cited by 245

Crystallization behavior and morphological characterization of poly(ether ether ketone)

Jin, L., Ball, J., Bremner, T., & Sue, H. (2014) · Polymer · doi:10.1016/j.polymer.2014.08.045 · Cited by 140

Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printing

Wu, W., Geng, P., Zhao, J., Zhang, Y., Rosen, D. W., & Zhang, H. B. (2014) · Materials Research Innovations · doi:10.1179/1432891714z.000000000898 · Cited by 123

Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer

Zalaznik, M., Kalin, M., & Novak, S. (2015) · Tribology International · doi:10.1016/j.triboint.2015.08.016 · Cited by 117

Processing poly(ether etherketone) an a 3D printer for thermoplastic modelling

Valentan, B., Kadivnik, Ž., Brajlih, T., Anderson, A., & Drstvenšek, I. (2013) · University of Maribor digital library (University of Maribor) · Cited by 60

Study Of the compression behaviours of 3D-printed PEEK/CFR-PEEK sandwich composite structures

Jiang, H., Aihemaiti, P., Aiyiti, W., & Kasimu, A. (2021) · Virtual and Physical Prototyping · doi:10.1080/17452759.2021.2014636 · Cited by 37

Optimization of 3D Printed Rapid Prototype Deep Drawing Tools for Automotive and Railway Sheet Material Testing

Szalai, S., Herold, B., Kurhan, D., Németh, A., Sysyn, M., & Fischer, S. (2023) · Infrastructures · doi:10.3390/infrastructures8030043 · Cited by 36

Effects of physical and chemical ageing on 3D printed poly (ether ether ketone)/poly (ether imide) [PEEK/PEI] blend for aerospace applications

Magri, A. E., & Vaudreuil, S. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-08068-w · Cited by 37

Optimization and tribological performance of PEEK based composite coatings reinforced with PTFE for friction pairs of aviation hydraulic pumps

Xu, Y., Zhang, K., Wu, H., Yao, L., & Mahapatra, M. (2024) · Tribology International · doi:10.1016/j.triboint.2024.109661 · Cited by 35

A Comprehensive Review of Fused Filament Fabrication: Numerical Modeling Approaches and Emerging Trends

Enriconi, M., Rodríguez, R., de Araújo, M. S., Rocha, J., García-Martin, R., Ribeiro, J., Pisonero, J., & Rodríguez‐Martín, M. (2025) · Applied Sciences · doi:10.3390/app15126696 · Cited by 35

Fused Deposition Modeling of Polyamides: Crystallization and Weld Formation

Costanzo, A., Croce, U., Spotorno, R., Fenni, S. E., & Cavallo, D. (2020) · Polymers · doi:10.3390/polym12122980 · Cited by 35

An overview of additive manufacturing methods, materials, and applications for flexible structures

Jayswal, A., & Adanur, S. (2022) · Journal of Industrial Textiles · doi:10.1177/15280837221114638 · Cited by 38

The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabrication

Katalagarianakis, A., de Voorde, B. V., Pien, N., Polyzos, E., Ðuretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Hemelrijck, D. V., Vlierberghe, S. V., et al. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103246 · Cited by 35

Surface Functionalization of Three Dimensional-Printed Polycaprolactone-Bioactive Glass Scaffolds by Grafting GelMA Under UV Irradiation

Ghorbani, F., Sahranavard, M., Nejad, Z. M., Li, D., Zamanian, A., & Yu, B. (2020) · Frontiers in Materials · doi:10.3389/fmats.2020.528590 · Cited by 34

Fused filament printing of specialized biomedical devices: a state-of-the art review of technological feasibilities with PEEK

Ghomi, E. R., Eshkalak, S. K., Singh, S., Chinnappan, A., Ramakrishna, S., & Narayan, R. J. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2020-0139 · Cited by 36

Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material

Qu, H., Zhang, W., Li, Z., Hou, L., Li, G., Fuh, J. Y. H., & Wu, W. (2022) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-022-00650-1 · Cited by 34

In situ 3D printing of poly-ether-ether-ketone / poly-ether-imide hierarchical cellular foams containing electromagnetic absorbent

Zhang, J., Li, D., Zhu, W., & Li, Y. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103181 · Cited by 33

Effect of annealing treatment and infill percentage on 3D-printed PEEK samples by Fused Filament Fabrication

Lannunziata, E., Colucci, G., Minetola, P., & Giubilini, A. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-13347-8 · Cited by 33

Interlayer enhancement of 3D printed CF/PLA composites via localized microwave welding and annealing-induced crystallization

Li, H., Mu, Y., Wang, Q., Cai, D., Zhang, Y., Luo, Y., Liu, J., Liu, J., Niu, K., Wu, Y., et al. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111737 · Cited by 33

Mechanical performance of novel curved sandwich structures featuring 3D printed continuous carbon fiber/polyamide 6 composite corrugated core with rail interlocking

Um, H.-J., Rho, H.-J., Jeon, N.-H., Shin, J.-H., & Kim, H. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112222 · Cited by 33

Applications, modifications, and manufacturing of polyetheretherketone (PEEK) in dental implantology: A comprehensive critical review

Alqutaibi, A. Y., Alghauli, M. A., Algabri, R., Hamadallah, H. H., Aboalrejal, A., Zafar, M. S., & Fareed, M. A. (2025) · International Materials Reviews · doi:10.1177/09506608251314251 · Cited by 33

Enhancing concrete microstructure with carboxymethyl cellulose (CMC) and microcrystalline cellulose (MCC): A comprehensive characterization using FTIR, TGA, and XRD

Tufan, M. Z., Kaplan, A. N., & Özel, C. (2025) · Journal of Building Engineering · doi:10.1016/j.jobe.2025.112611 · Cited by 33

3D printing and continuous flow chemistry technology to advance pharmaceutical manufacturing in developing countries

Sagandira, C. R., Siyawamwaya, M., & Watts, P. (2020) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2020.09.020 · Cited by 33

The Surface Characterisation of Fused Filament Fabricated (FFF) 3D Printed PEEK/Hydroxyapatite Composites

Rodzeń, K., McIvor, M. J., Sharma, P. K., Acheson, J. G., McIlhagger, A., Mokhtari, M., McFerran, A., Ward, J., Meenan, B. J., & Boyd, A. (2021) · Polymers · doi:10.3390/polym13183117 · Cited by 33

Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone

Wang, P., Pan, A., Xia, L., Cao, Y., Zhang, H., & Wu, W. (2022) · High Performance Polymers · doi:10.1177/09540083211067388 · Cited by 33

Advancements in Functionally Graded Polyether Ether Ketone Components: Design, Manufacturing, and Characterisation Using a Modified 3D Printer

McNiffe, E., Ritter, T., Higgins, T., Sam-Daliri, O., Flanagan, T., Walls, M., Ghabezi, P., Finnegan, W. G., Mitchell, S., & Harrison, N. M. (2023) · Polymers · doi:10.3390/polym15142992 · Cited by 33

Improvement in Mechanical Properties of 3D‐Printed PEEK Structure by Nonsolvent Vapor Annealing

Chen, W., Zhang, X., Tan, D., Xu, P., Yang, B., Shi, K., Zhu, B., Liu, Q., Lei, Y., Liu, S., et al. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202100874 · Cited by 32

Design of a low-cost, high-temperature inverted build environment to enable desktop-scale additive manufacturing of performance polymers

Zawaski, C. E., & Williams, C. B. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101111 · Cited by 32

Covalent polymer functionalized graphene oxide/poly(ether ether ketone) composites for fused deposition modeling: improved mechanical and tribological performance

Yang, C., Xu, J., Xing, Y., Hao, S., & Ren, Z. (2020) · RSC Advances · doi:10.1039/d0ra04418k · Cited by 32

Prediction of temperature and crystal growth evolution during 3D printing of polymeric materials via extrusion

Yuan, Y., Abeykoon, C., Mirihanage, W. U., Fernando, A., Kao, Y.-C., & Harings, J. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109121 · Cited by 32

Effect of extruder temperature and printing speed on the tensile strength of fused deposition modeling (FDM) 3D printed samples: a meta-analysis study

Farashi, S., & Vafaee, F. (2022) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-021-00827-4 · Cited by 32

Study on the hot isostatic pressing post-treatment of FDM-3D printed continuous carbon fiber reinforced composites

Xu, Z., Zou, B., Ding, S., Zhuang, Y., & Wang, X. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.08.060 · Cited by 32

Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM

Pandelidi, C., Maconachie, T., Bateman, S. A., Kelbassa, I., Piegert, S., Leary, M., & Brandt, M. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-10-2019-0274 · Cited by 31

Increased strength in carbon-poly(ether ether ketone) composites from material extrusion with rapid microwave post processing

Ai, J.-R., Li, S., & Vogt, B. D. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103209 · Cited by 31

Recycled, Bio-Based, and Blended Composite Materials for 3D Printing Filament: Pros and Cons—A Review

Nguyen, K. Q., Vuillaume, P. Y., Hu, L., López‐Beceiro, J., Cousin, P., Elkoun, S., & Robert, M. (2023) · Materials Sciences and Applications · doi:10.4236/msa.2023.143010 · Cited by 31

Thermal, Tensile and Fatigue Behaviors of the PA6, Short Carbon Fiber-Reinforced PA6, and Continuous Glass Fiber-Reinforced PA6 Materials in Fused Filament Fabrication (FFF)

Ahmadifar, M., Benfriha, K., & Shirinbayan, M. (2023) · Polymers · doi:10.3390/polym15030507 · Cited by 30

Effect of high-temperature acid aging on microstructure and mechanical properties of PEEK

Badeghaish, W. O., Wagih, A., Rastogi, S., & Gilles Lubineau, A. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108429 · Cited by 30

Enhancing the mechanical properties of SCF/PEEK composites in FDM via process-parameter optimization

Hu, B., Xing, Z., Wu, W., Zhang, X., Zhou, H., Du, C., & Shan, B. (2021) · High Performance Polymers · doi:10.1177/09540083211003654 · Cited by 30

Mechanical reinforcement of additive-manufactured constructs using in situ auxiliary heating process

Lee, J. E., Park, S. J., Son, Y., Park, K., & Park, S.-H. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101995 · Cited by 30

A Multi-Criteria Assessment Strategy for 3D Printed Porous Polyetheretherketone (PEEK) Patient-Specific Implants for Orbital Wall Reconstruction

Sharma, N., Welker, D., Aghlmandi, S., Maintz, M., Zeilhofer, H., Honigmann, P., Seifert, T., & Thieringer, F. M. (2021) · Journal of Clinical Medicine · doi:10.3390/jcm10163563 · Cited by 30

3D PEEK Objects Fabricated by Fused Filament Fabrication (FFF)

Baek, I.-W., Kwon, O., Lim, C.-M., Park, K. Y., & Bae, C. (2022) · Materials · doi:10.3390/ma15030898 · Cited by 30

Mechanical Properties of 3D-Printed Porous Poly-ether-ether-ketone (PEEK) Orthopedic Scaffolds

Gummadi, S. K., Saini, A., Owusu-Danquah, J. S., & Sikder, P. (2022) · JOM · doi:10.1007/s11837-022-05361-6 · Cited by 30

Effect of Heat Treatment on Elastic Properties and Fracture Toughness of Fused Filament Fabricated PEEK for Biomedical Applications

Vindokurov, I., Pirogova, Y., Анатольевич, Т. М., & Silberschmidt, V. V. (2022) · Polymers · doi:10.3390/polym14245521 · Cited by 30

Experimental investigation of robotic 3D printing of high-performance thermoplastics (PEEK): a critical perspective to support automated fibre placement process

Velu, R., Vaheed, N. M., Ramachandran, M. K., & Raspall, F. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04623-z · Cited by 30

Application of machine learning to optimize process parameters in fused deposition modeling of PEEK material

Feng, Q., Maier, W., & Möhring, H. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.04.001 · Cited by 29

Correlation between welding behavior and mechanical anisotropy of long chain polyamide 12 manufactured with fused filament fabrication

Qi, S., Gao, X., Su, Y., Dong, X., Cavallo, D., & Wang, D. (2020) · Polymer · doi:10.1016/j.polymer.2020.123318 · Cited by 29

Poly-ether-ether-ketone – Neodymium-iron-boron bonded permanent magnets via fused filament fabrication

Pigliaru, L., Paleari, L., Bragaglia, M., Nanni, F. M. C., Ghidini, T., & Rinaldi, M. (2021) · Synthetic Metals · doi:10.1016/j.synthmet.2021.116857 · Cited by 29

Direct evidence of interfacial crystallization preventing weld formation during fused filament fabrication of poly(ether ether ketone)

Collinson, D. W., von Windheim, N., Gall, K., & Brinson, L. C. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102604 · Cited by 29

Preparation and Modification of Porous Polyetheretherketone (PEEK) Cage Material Based on Fused Deposition Modeling (FDM)

Zhang, H., Duan, M., Qin, S., & Zhang, Z. (2022) · Polymers · doi:10.3390/polym14245403 · Cited by 29

Optimization and manufacture of polyetheretherketone patient specific cranial implants by material extrusion – A clinical perspective

Smith, J. A. M., Petersmann, S., Arbeiter, F. J., & Schäfer, U. (2023) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2023.105965 · Cited by 29

Biomimetic design and fabrication of PEEK and PEEK/CF cage with minimal surface structures by fused filament fabrication

Zhang, H., Guo, Z., Zhang, Z., Wu, G., & Sang, L. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.08.236 · Cited by 29

Criteria selection for a comparative study of functional performance of Fused Deposition Modelling and Vacuum Casting processes

Puerta, A. P. V., Sánchez, D. M., Batista, M., & Salguero, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.033 · Cited by 29

Effects of thermal process conditions on crystallinity and mechanical properties in material extrusion additive manufacturing of discontinuous carbon fibre reinforced polyphenylene sulphide composites

Lyu, Y., Wu, J. Y., Zhang, H., Brádaigh, C. M. Ó., & Yang, D. (2023) · Journal of Composite Materials · doi:10.1177/00219983231194391 · Cited by 28

Polydimethylsiloxane and poly(ether) ether ketone functionally graded composites for biomedical applications

Smith, J. A. M., Mele, E., Rimington, R. P., Capel, A. J., Lewis, M. P., Silberschmidt, V. V., & Li, S. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.02.012 · Cited by 31

Functional design and biomechanical evaluation of 3D printing PEEK flexible implant for chest wall reconstruction

Kang, J., Tian, Y., Zheng, J., Lu, D., Cai, K., Wang, L., & Li, D. (2022) · Computer Methods and Programs in Biomedicine · doi:10.1016/j.cmpb.2022.107105 · Cited by 28

Fused filament fabrication-3D printing of poly-ether-ether-ketone (PEEK) spinal fusion cages

Saini, A., Elhattab, K., Gummadi, S. K., Nadkarni, G., & Sikder, P. (2022) · Materials Letters · doi:10.1016/j.matlet.2022.133206 · Cited by 28

Material extrusion-based additive manufacturing of polyetheretherketone cranial implants: Mechanical performance and print quality

Petersmann, S., Smith, J. A. M., Schäfer, U., & Arbeiter, F. J. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.11.143 · Cited by 28

Effect of Printing Parameters on Mechanical Performance of Material-Extrusion 3D-Printed PEEK Specimens at the Point-of-Care

Zarean, P., Malgaroli, P., Zarean, P., Seiler, D., de Wild, M., Thieringer, F. M., & Sharma, N. (2023) · Applied Sciences · doi:10.3390/app13031230 · Cited by 28

Battery thermal management systems for electric vehicles: an overview of cooling techniques and performance optimization

Koundal, S., Sharma, S. L., & Debbarma, A. (2025) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-025-14170-3 · Cited by 27

Modern Porous Polymer Implants: Synthesis, Properties, and Application

Kovylin, R. S., Aleynik, D. Y., & Fedushkin, I. L. (2021) · Polymer Science Series C · doi:10.1134/s1811238221010033 · Cited by 28

Additive Manufacturing of Polyamide 66: Effect of Process Parameters on Crystallinity and Mechanical Properties

Liao, G., Li, Z., Luan, C., Wang, Z., Yao, X., & Fu, J. (2021) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-021-06149-6 · Cited by 27

4D printing high temperature shape-memory poly(ether–ether–ketone)

Zhou, T., Zhou, Y., Hua, Z., Yang, Y., Zhou, C., Ren, L., Zhang, Z., & Zang, J. (2021) · Smart Materials and Structures · doi:10.1088/1361-665x/ac24f0 · Cited by 28

Thermoplastic Extrusion Additive Manufacturing of High-Performance Carbon Fiber PEEK Lattices

Santiago, C. C., Yelamanchi, B., Peña, J. Á., Lamb, J., Roguski, K., Turzyński, F., Faruqui, R., Choo, K., du Plessis, A., Sillani, F., et al. (2021) · Crystals · doi:10.3390/cryst11121453 · Cited by 27

Effect of heat treatment on crystallinity and mechanical properties of flexible structures 3D printed with fused deposition modeling

Jayswal, A., & Adanur, S. (2021) · Journal of Industrial Textiles · doi:10.1177/15280837211064937 · Cited by 27

Enhanced mechanical and tribological properties of 3D printed short carbon fiber reinforced polyether ether ketone composites

Lv, X., Yang, S., Pei, X., Zhang, Y., Wang, Q., & Wang, T. (2024) · Polymer Composites · doi:10.1002/pc.28380 · Cited by 27

In-house processing of carbon fiber-reinforced polyetheretherketone (CFR-PEEK) 3D printable filaments and fused filament fabrication-3D printing of CFR-PEEK parts

Naganaboyina, H. P. S., Nagaraju, P., Sonaye, S. Y., Bokam, V. K., & Sikder, P. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-12203-5 · Cited by 27

Systematic review of multiscale thermal prediction models for FDM/FFF additive manufacturing: Toward digital twin integration with physics-informed machine learning

Efa, D. A., & Ifa, D. A. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.108087 · Cited by 26

Effect of molecular weight on mechanical properties and microstructure of 3D printed poly(ether ether ketone)

Xu, Q., Shang, Y., Jiang, Z., Wang, Z., Zhou, C., Liu, X., Yan, Q., Li, X., & Zhang, H. (2020) · Polymer International · doi:10.1002/pi.6166 · Cited by 26

Effect of porosity and crystallinity on mechanical properties of laser in-situ consolidation thermoplastic composites

Zhang, C., Duan, Y., Xiao, H. L., Wang, B., Ming, Y., Zhu, Y., & Zhang, F. (2022) · Polymer · doi:10.1016/j.polymer.2022.124573 · Cited by 26

Mechanical Recycling of Low-Density Polyethylene/Carbon Nanotube Composites and Its Effect on Material Properties

Stan, F., Stanciu, N.-V., Fetecău, C., & Sandu, I.-L. (2019) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4044101 · Cited by 26

Effects of Low-pressure Annealing on the Performance of 3D Printed CF/PEEK Composites

Yu, X. H., Song, W., Zheng, J., Chen, Y., Luo, L., Fan, C., & Shan, Z. (2023) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2023.100076 · Cited by 26

Improving carbon fibre reinforced polyphenylene sulfide using amine and phenolic interphase modifications

Dabees, S., Borkar, A., Newman, B., Simon, Ž., Hayne, D. J., Coia, P., & Henderson, L. C. (2024) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2024.108045 · Cited by 26

Influence of polyether ether ketone (PEEK) viscosity on interlayer shear strength in screw extrusion additive manufacturing

Curmi, A., Rochman, A., & Buhagiar, J. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104086 · Cited by 25

Effect of the fibre length on the mechanical anisotropy of glass fibre–reinforced polymer composites printed by Multi Jet Fusion

Liu, X., Tey, W. S., Tan, P., Leong, K. K., Chen, J., Tian, Y., Ong, A. C. Y., Zhao, L., & Zhou, K. (2022) · Virtual and Physical Prototyping · doi:10.1080/17452759.2022.2059638 · Cited by 25

Additive manufacturing of continuous BF-reinforced PES composite material and mechanical and wear properties evaluation

Wu, W., Li, Z., Lin, G., Ma, J., Gao, Z., Qu, H., & Zhang, F. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07425-z · Cited by 25

Effect of annealing and carbon nanotube infill on the mechanical and electrical properties of additively manufactured polyether-ether-ketone nanocomposites via fused filament fabrication

Ye, X., Hu, Z., Li, X., Wang, S., Wang, B., Zhao, Y., He, J., Liu, J., & Zhang, J. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103188 · Cited by 25

A novel method to combine fused deposition modelling and inkjet printing in manufacturing multifunctional parts for aerospace application

Zhang, H., Hui, J., Lv, J., Lee, C.-H., Yan, Z., Wang, J. J., Guo, L., & Xu, Z. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.04.059 · Cited by 25

Rapid mold temperature rising method for PEEK microcellular injection molding based on induction heating

Guo, Z., Xie, J., Yang, J., Fu, J., & Zhao, P. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.08.081 · Cited by 25

Effect of hot-press thermal history on joint strength of A5052/Polyamide-6 hybrid structure via a porous layer

Kim, S., Suzuki, A., Takata, N., & Kobashi, M. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.116388 · Cited by 25

Innovating Gastronomy through Information Technology: A Bibliometric Analysis of 3D Food Printing for Present and Future Research

Elshaer, I. A., Azazz, A. M. S., Zayed, M. A., Ameen, F. A., Fayyad, S., Fouad, A. M., Khalil, N., & Fathy, E. A. (2024) · Information · doi:10.3390/info15080471 · Cited by 24

Melt‐impregnation and sizing optimization for the fabrication of high‐performance 3D printed continuous carbon fiber‐reinforced polyetheretherketone filaments

Yu, X. H., Zheng, J., Chen, Y., Fan, C., Song, W., & Shan, Z. (2025) · Polymer Composites · doi:10.1002/pc.29472 · Cited by 24

Hydrothermal aging of friction riveted thermoplastic composite joints for aircraft applications

Borba, N. Z., dos Santos, J. F., & Amancio‐Filho, S. T. (2020) · Composite Structures · doi:10.1016/j.compstruct.2020.112871 · Cited by 24

Investigating inexpensive polymeric 3D printed materials under extreme thermal conditions

Storck, J. L., Ehrmann, G., Uthoff, J., Diestelhorst, E., Błachowicz, T., & Ehrmann, A. (2022) · Materials Futures · doi:10.1088/2752-5724/ac4beb · Cited by 24

Functional engineering strategies of 3D printed implants for hard tissue replacement

Chen, C., Huang, B., Liu, Y., Liu, F., & Lee, I.-S. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac094 · Cited by 24

Insights into the Supramolecular Structure and Degradation Mechanisms of Starch from Different Botanical Sources as Affected by Extrusion-based 3D Printing

Shahbazi, M., Jäger, H., Ettelaie, R., & Ulbrich, M. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c00881 · Cited by 24

Effect of Strain Rates and Heat Exposure on Polyamide (PA12) Processed via Selective Laser Sintering

Morano, C., Alfano, M., & Pagnotta, L. (2023) · Materials · doi:10.3390/ma16134654 · Cited by 24

Revealing filler morphology in 3D-printed thermoset nanocomposites by scanning microbeam X-ray scattering

Trigg, E. B., Hmeidat, N. S., Smieska, L., Woll, A. R., Compton, B. G., & Koerner, H. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101729 · Cited by 24

Additive Manufacturing of High-Temperature Thermoplastic Polysulfone with Tailored Microstructure via Precipitation Printing

Tu, R., Kim, H. C., & Sodano, H. A. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c09048 · Cited by 23

Comprehensive analysis of fused deposition modeling process conditions for enhancing mechanical properties and surface quality of 3D-Printed poly-ether-ether-ketone

Gao, J., Li, W., Wang, J., Wang, X., Sha, C., & Zhao, K. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108432 · Cited by 23

Prediction and optimization of tensile strength of additively manufactured PEEK biopolymer using machine learning techniques

Borah, J., & Chandrasekaran, M. (2024) · Multiscale and Multidisciplinary Modeling Experiments and Design · doi:10.1007/s41939-024-00505-4 · Cited by 23

Redefining Medical Applications with Safe and Sustainable 3D Printing

Khan, S. B., Irfan, S., Zhang, Z., & Yuan, W. (2025) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c01923 · Cited by 23

Optimization of fused deposition modeling process parameters using the Taguchi method to improve the tensile properties of 3D-printed polyether ether ketone

Timoumi, M., Barhoumi, N., Lamnawar, K., Maazouz, A., & Znaidi, A. (2021) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1177/14644207211017572 · Cited by 23

Failure mechanism and heat treatment effect of 3D-printed bio-inspired helicoidal CF/PEEK composites

Li, W., Huang, W., Xiong, Y., Zhou, L., Gao, F., & Lin, J. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101464 · Cited by 23

Functionalization of aluminum alloy surface with reactive epoxide silane to induce ultra-high strength polyamide 6 / aluminum alloy composite joint

Wang, B., Li, X., Hu, Z., Wang, S., Dong, W., Wang, B., Wang, L., & Gong, N. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.157231 · Cited by 23

Non-planar material-extrusion additive manufacturing of multifunctional sandwich structures using carbon-reinforced polyetheretherketone (PEEK)

Pierre, J., Verville, M., Chenier, G., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104124 · Cited by 26

Assessments and investigation of process parameter impacts on surface roughness, microstructure, tensile strength, and porosity of 3D printed polyetherether ketone (PEEK) materials

Gobena, S. T., & Woldeyohannes, A. D. (2024) · Results in Engineering · doi:10.1016/j.rineng.2024.103317 · Cited by 23

Poly(arylene ether ketones): Thermostable, Heat Resistant, and Chemostable Thermoplastics and Prospects for Designing Various Materials on Their Basis

Salazkin, S. N., & Shaposhnikova, V. V. (2020) · Polymer Science Series C · doi:10.1134/s1811238220020125 · Cited by 22

Recent progress in 3D-printed polyaryletherketone (PAEK)-based high-performance polymeric implants for musculoskeletal reconstructions

Banerjee, K., Debroy, M., Balla, V. K., & Bodhak, S. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00231-4 · Cited by 22

Hangprinter for large scale additive manufacturing using fused particle fabrication with recycled plastic and continuous feeding

Rattan, R. S., Nauta, N., Romani, A., & Pearce, J. M. (2023) · HardwareX · doi:10.1016/j.ohx.2023.e00401 · Cited by 22

Fabrication of polyetheretherketone (PEEK)-based 3D electronics with fine resolution by a hydrophobic treatment assisted hybrid additive manufacturing method

Wu, L., Li, M., Wang, Y., Lv, M., Ouyang, T., Wang, Y., & Zeng, X. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acd826 · Cited by 22

High-Cycle Fatigue Behaviour of Polyetheretherketone (PEEK) Produced by Additive Manufacturing

Rendas, P., Imperadeiro, A., Martins, R. F., & Soares, B. A. R. (2023) · Polymers · doi:10.3390/polym16010018 · Cited by 22

3D printed sequence-controlled copolyimides with high thermal and mechanical performance

Du, X., Liu, Y., Song, M., Zhai, L., He, M., Fan, L., Wang, Y., Zhao, W. G., & Wang, G. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111262 · Cited by 22

Molding of polyether ether ketone (PEEK) and its composites: a review

Guo, Z., He, J., Gao, R., Pan, Y., Zhang, C., Fu, J., & Zhao, P. (2024) · Journal of Zhejiang University. Science A · doi:10.1631/jzus.a2400004 · Cited by 22

Influence of fused filament fabrication parameters on tensile properties of polylactide/layered silicate nanocomposite using response surface methodology

Ginoux, G., Vroman, I., & Alix, S. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50174 · Cited by 21

Heat transfer simulation of material extrusion additive manufacturing to predict weld strength between layers

Sinha, S., Lynch, S. P., & Meisel, N. A. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102117 · Cited by 21

Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material

Qu, H., Zhang, W., Li, Z., Hou, L., Li, G., Fuh, J. Y. H., & Wu, W. (2022) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-022-00650-1 · Cited by 34

Effect of 3D Printing Process Parameters and Heat Treatment Conditions on the Mechanical Properties and Microstructure of PEEK Parts

Zhen, H., Zhao, B., Quan, L., & Fu, J. (2023) · Polymers · doi:10.3390/polym15092209 · Cited by 68

Influence of Process Parameters of 3D Printed PEEK on Crystallinity and Mechanical Performances

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-28547-9_21

Evaluation of the influence of process parameters on crystallinity and tensile strength of 3D printed PEEK parts

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062231198784 · Cited by 2

Effect of printing parameters and heat treatment on the crystallinity of PEEK by fused filament fabrication

Sun, Q., Ma, J., Man, J., Ali, Z., Gao, C., Kamm, P. H., García‐Moreno, F., Tan, X., Yin, K., Eberl, C., et al. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.07.127 · Cited by 1