Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material

Physical properties of polymers handbook

Mark, J. (2007) · Springer eBooks · doi:10.1007/978-0-387-69002-5 · Cited by 1,670

The morphology of poly(aryl-ether-ether-ketone)

Blundell, D. J., & Osborn, B. N. (1983) · Polymer · doi:10.1016/0032-3861(83)90144-1 · Cited by 1,064

A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness

Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 771

Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing

Weng, Z., Wang, J., Senthil, T., & Wu, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.04.045 · Cited by 608

Extrusion-based additive manufacturing of PEEK for biomedical applications

Vaezi, M., & Yang, S. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097053 · Cited by 418

Mechanical impact behavior of polyether–ether–ketone (PEEK)

Garcia‐Gonzalez, D., Rusinek, A., Jankowiak, T., & Árias, A. (2015) · Composite Structures · doi:10.1016/j.compstruct.2014.12.061 · Cited by 245

Crystallization behavior and morphological characterization of poly(ether ether ketone)

Jin, L., Ball, J., Bremner, T., & Sue, H. (2014) · Polymer · doi:10.1016/j.polymer.2014.08.045 · Cited by 140

Manufacture and thermal deformation analysis of semicrystalline polymer polyether ether ketone by 3D printing

Wu, W., Geng, P., Zhao, J., Zhang, Y., Rosen, D. W., & Zhang, H. B. (2014) · Materials Research Innovations · doi:10.1179/1432891714z.000000000898 · Cited by 123

Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer

Zalaznik, M., Kalin, M., & Novak, S. (2015) · Tribology International · doi:10.1016/j.triboint.2015.08.016 · Cited by 117

Processing poly(ether etherketone) an a 3D printer for thermoplastic modelling

Valentan, B., Kadivnik, Ž., Brajlih, T., Anderson, A., & Drstvenšek, I. (2013) · University of Maribor digital library (University of Maribor) · Cited by 60

Recent Progress on Polymer Materials for Additive Manufacturing

Tan, L. J., Zhu, W., & Zhou, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003062 · Cited by 776

A critical review on the fused deposition modeling of thermoplastic polymer composites

Penumakala, P. K., Santo, J., & Thomas, A. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108336 · Cited by 719

Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling

Caminero, M. Á., Chacón, J. M., García-Moreno, I., & Rodríguez, G. P. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.04.054 · Cited by 483

Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK

Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 462

Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites

Rahim, T. N. A. T., Abdullah, A. M., & Akil, H. M. (2019) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2019.1597883 · Cited by 472

Interlaminar bonding performance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling

Caminero, M. Á., Chacón, J. M., García-Moreno, I., & Reverte, J. M. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.04.038 · Cited by 422

Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/PEEK

Wang, P., Zou, B., Ding, S., Li, L., & Huang, C. (2020) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.05.040 · Cited by 376

Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications

Arefin, A. M. E., Khatri, N. R., Kulkarni, N. N., & Egan, P. (2021) · Polymers · doi:10.3390/polym13091499 · Cited by 381

Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications

Han, X., Yang, D., Yang, C., Spintzyk, S., Scheideler, L., Li, P., Li, D., Geis‐Gerstorfer, J., & Rupp, F. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8020240 · Cited by 365

Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing

Bhandari, S., Lopez-Anido, R. A., & Gardner, D. J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100922 · Cited by 362

Preparation of short CF/GF reinforced PEEK composite filaments and their comprehensive properties evaluation for FDM-3D printing

Wang, P., Zou, B., Ding, S., Huang, C., Shi, Z., Ma, Y., & Yao, P. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108175 · Cited by 360

Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM

Ding, S., Zou, B., Wang, P., & Ding, H. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.105948 · Cited by 351

Advances in 3D printing for polymer composites: A review

Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 331

Effects of extrusion speed and printing speed on the 3D printing stability of extruded PEEK filament

Geng, P., Zhao, J., Wu, W., Ye, W., Wang, Y., Wang, S., & Zhang, S. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.11.023 · Cited by 321

Performance of biocompatible PEEK processed by fused deposition additive manufacturing

Arif, M. F., Kumar, S., Varadarajan, K. M., & Cantwell, W. J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.03.015 · Cited by 296

3D-printed PEEK-carbon fiber (CF) composites: Structure and thermal properties

Stepashkin, А. А., Chukov, D. I., Senatov, F. S., Salimon, A. I., Korsunsky, A. M., & Kaloshkin, S. D. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.05.032 · Cited by 293

Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)

Benwood, C., Anstey, A., Andrzejewski, J., Misra, M., & Mohanty, A. K. (2018) · ACS Omega · doi:10.1021/acsomega.8b00129 · Cited by 268

Mechanical Properties Optimization of Poly-Ether-Ether-Ketone via Fused Deposition Modeling

Deng, X., Zeng, Z. P., Peng, B., Yan, S., & Ke, W. (2018) · Materials · doi:10.3390/ma11020216 · Cited by 263

Material Anisotropy in Additively Manufactured Polymers and Polymer Composites: A Review

Zohdi, N., & Yang, C. (2021) · Polymers · doi:10.3390/polym13193368 · Cited by 261

Multifunctional performance of carbon nanotubes and graphene nanoplatelets reinforced PEEK composites enabled via FFF additive manufacturing

Arif, M. F., Alhashmi, H., Varadarajan, K. M., Koo, J. H., Hart, A. J., & Kumar, S. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107625 · Cited by 245

Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers

Das, A., Chatham, C. A., Fallon, J. J., Zawaski, C. E., Gilmer, E. L., Williams, C. B., & Bortner, M. J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101218 · Cited by 242

Fused filament fabrication of peek: A review of process-structure-property relationships

Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240

Semi-crystalline feedstock for filament-based 3D printing of polymers

Vaes, D., & Puyvelde, P. V. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101411 · Cited by 235

A Review of Multi-Material 3D Printing of Functional Materials via Vat Photopolymerization

Shaukat, U., Rossegger, E., & Schlögl, S. (2022) · Polymers · doi:10.3390/polym14122449 · Cited by 233

3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties

Coppola, B., Cappetti, N., Maio, L. D., Scarfato, P., & Incarnato, L. (2018) · Materials · doi:10.3390/ma11101947 · Cited by 230

3D printing of polyether-ether-ketone for biomedical applications

Singh, S., Prakash, C., & Ramakrishna, S. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.035 · Cited by 230

Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts

Valvez, S., Silva, A. P., & Reis, P. N. B. (2022) · Polymers · doi:10.3390/polym14132564 · Cited by 220

Crystallinity studies of PEKK and carbon fibre/PEKK composites: A review

Pérez-Martín, H., Mackenzie, P., Baidak, A., Ó Brádaigh, C. M., & Ray, D. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109127 · Cited by 212

Developments of PEEK (Polyetheretherketone) as a biomedical material: A focused review

Verma, S., Sharma, N., Kango, S., & Sharma, S. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110295 · Cited by 211

Characterization of 3D-printed PLA parts with different raster orientations and printing speeds

Khosravani, M. R., Berto, F., Ayatollahi, M. R., & Reinicke, T. (2022) · Scientific Reports · doi:10.1038/s41598-022-05005-4 · Cited by 209

A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures

Liu, S., Li, Y., & Li, N. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.007 · Cited by 210

Influence of PLA Filament Conditions on Characteristics of FDM Parts

Puerta, A. P. V., Batista, M., Salguero, J., & Girot, F. A. (2018) · Materials · doi:10.3390/ma11081322 · Cited by 198

Nozzle condition monitoring in 3D printing

Tlegenov, Y., Hong, G. S., & Lu, W. F. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2018.05.010 · Cited by 195

Polyether ether ketone (PEEK) and its 3D printed implants applications in medical field: An overview

Haleem, A., & Javaid, M. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2019.01.003 · Cited by 190

Effect of 3D printing process parameters on surface and mechanical properties of FFF-printed PEEK

Pulipaka, A., Gide, K. M., Beheshti, A., & Bagheri, Z. S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.11.057 · Cited by 188

The thermal properties of FDM printed polymeric materials: A review

Shanmugam, V., Babu, K., Kannan, G., Mensah, R. A., Samantaray, S. K., & Das, O. (2024) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2024.110902 · Cited by 180

Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication: A Review of Recent Developments

Harris, M., Potgieter, J., Archer, R. H., & Arif, K. M. (2019) · Materials · doi:10.3390/ma12101664 · Cited by 178

3D printing: An appealing route for customized drug delivery systems

ElKasabgy, N. A., Mahmoud, A. A. K., & Maged, A. (2020) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2020.119732 · Cited by 177

Screw extrusion-based additive manufacturing of PEEK

Tseng, J.-W., Liu, C.-Y., Yen, Y.-K., Belkner, J., Bremicker, T., Liu, B. H., Sun, T.-J., & Wang, A.-B. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.032 · Cited by 175

Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling

Magri, A. E., Mabrouk, K. E., Vaudreuil, S., & Touhami, M. E. (2019) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705719847244 · Cited by 170

Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts

Magri, A. E., Mabrouk, K. E., Vaudreuil, S., Chibane, H., & Touhami, M. E. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49087 · Cited by 170

Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling

Ceretti, D. V. A., Edeleva, M., Cardon, L., & D’hooge, D. (2023) · Molecules · doi:10.3390/molecules28052344 · Cited by 169

Investigating the Effects of Annealing on the Mechanical Properties of FFF-Printed Thermoplastics

Butt, J., & Bhaskar, R. (2020) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp4020038 · Cited by 164

Additive Manufacturing Post-Processing Treatments, a Review with Emphasis on Mechanical Characteristics

Diniță, A., Neacșa, A., Portoacă, A. I., Tănase, M., Ilinca, C. N., & RAMADAN, I. N. (2023) · Materials · doi:10.3390/ma16134610 · Cited by 161

Recent advances and challenges in materials for 3D bioprinting

Mao, H., Yang, L., Zhu, H., Wu, L., Ji, P., Yang, J., & Gu, Z. (2020) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2020.09.015 · Cited by 164

Flexural Properties and Fracture Behavior of CF/PEEK in Orthogonal Building Orientation by FDM: Microstructure and Mechanism

Li, Q., Zhao, W. G., Li, Y., Yang, W., & Wang, G. (2019) · Polymers · doi:10.3390/polym11040656 · Cited by 156

Effects of crystallinity control on mechanical properties of 3D-printed short-carbon-fiber-reinforced polyether ether ketone composites

Yang, D., Cao, Y., Zhang, Z., Yin, Y., & Li, D. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107149 · Cited by 155

Modification of polyetheretherketone implants: From enhancing bone integration to enabling multi-modal therapeutics

He, M., Huang, Y. X., Xu, H., Feng, G., Liu, L., Li, Y., Sun, D., & Zhang, L. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.05.009 · Cited by 152

Mechanical characterization of biocompatible PEEK by FDM

Zhao, Y., Zhao, K., Li, Y., & Chen, F. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.063 · Cited by 146

3D printing of biodegradable polymers and their composites – Current state-of-the-art, properties, applications, and machine learning for potential future applications

Dananjaya, V., Chevali, V. S., Dear, J. P., Potluri, P., & Abeykoon, C. (2024) · Progress in Materials Science · doi:10.1016/j.pmatsci.2024.101336 · Cited by 144

Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective

Peterson, A. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.03.030 · Cited by 134

Polyether ether ketone (PEEK) and its manufacturing of customised 3D printed dentistry parts using additive manufacturing

Haleem, A., & Javaid, M. (2019) · Clinical Epidemiology and Global Health · doi:10.1016/j.cegh.2019.03.001 · Cited by 132

Fabrication and properties of poly(vinyl alcohol)/β-tricalcium phosphate composite scaffolds via fused deposition modeling for bone tissue engineering

Chen, G., Chen, N., & Wang, Q. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.01.004 · Cited by 130

Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts

Hu, B., Duan, X., Xing, Z., Xu, Z., Du, C., Zhou, H., Chen, R., & Shan, B. (2019) · Mechanics of Materials · doi:10.1016/j.mechmat.2019.103139 · Cited by 128

Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: Application to PEEK

Barba, D., Árias, A., & Garcia‐Gonzalez, D. (2019) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2019.08.021 · Cited by 132

Interlayer bonding strength of 3D printed PEEK specimens

Liaw, C., Tolbert, J. W., Chow, L. W., & Güvendiren, M. (2021) · Soft Matter · doi:10.1039/d1sm00417d · Cited by 128

Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?

Başgül, C., Yu, T., MacDonald, D. W., Siskey, R. L., Marcolongo, M. S., & Kurtz, S. M. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103455 · Cited by 123

Improvement of the layer-layer adhesion in FFF 3D printed PEEK/carbon fibre composites

Rodzeń, K., Harkin‐Jones, E., Wegrzyn, M., Sharma, P. K., & Zhigunov, A. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106532 · Cited by 122

Biomimetic Shape–Color Double‐Responsive 4D Printing

Wang, J., Wang, Z., Song, Z., Ren, L., Liu, Q., & Ren, L. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900293 · Cited by 121

Mechanical properties of fused filament fabricated PEEK for biomedical applications depending on additive manufacturing parameters

Wang, Y., Müller, W., Rumjahn, A., Schmidt, F., & Schwitalla, A. D. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.104250 · Cited by 120

A comprehensive analysis on the processing-structure-property relationships of FDM-based 3-D printed polyetheretherketone (PEEK) structures

Sikder, P., Challa, B. T., & Gummadi, S. K. (2022) · Materialia · doi:10.1016/j.mtla.2022.101427 · Cited by 118

Modeling of surface roughness based on heat transfer considering diffusion among deposition filaments for FDM 3D printing heat-resistant resin

Wang, P., Zou, B., & Ding, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114064 · Cited by 116

Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties

Geng, P., Zhao, J. X., Wu, W., Wang, Y., Wang, B., Wang, S., & Li, G. (2018) · Polymers · doi:10.3390/polym10080875 · Cited by 109

Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment

Chalgham, A., Ehrmann, A., & Wickenkamp, I. (2021) · Polymers · doi:10.3390/polym13081239 · Cited by 113

An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts

Magri, A. E., Vanaei, S., & Vaudreuil, S. (2021) · High Performance Polymers · doi:10.1177/09540083211009961 · Cited by 106

Additively-manufactured PEEK/HA porous scaffolds with highly-controllable mechanical properties and excellent biocompatibility

Zheng, J., Zhao, H., Dong, E., Kang, J., Liu, C., Sun, C., Li, D., & Wang, L. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112333 · Cited by 106

An In Vitro Study of Osteoblast Response on Fused-Filament Fabrication 3D Printed PEEK for Dental and Cranio-Maxillofacial Implants

Han, X., Sharma, N., Xu, Z., Scheideler, L., Geis‐Gerstorfer, J., Rupp, F., Thieringer, F. M., & Spintzyk, S. (2019) · Journal of Clinical Medicine · doi:10.3390/jcm8060771 · Cited by 105

Engineered 3D Polymer and Hydrogel Microenvironments for Cell Culture Applications

Fan, D., Staufer, U., & Accardo, A. (2019) · Bioengineering · doi:10.3390/bioengineering6040113 · Cited by 105

Impact of nanosilica on the friction and wear of a PEEK/CF composite coating manufactured by fused deposition modeling (FDM)

Lin, L., Ecke, N., Huang, M., Pei, X., & Schlarb, A. K. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107428 · Cited by 103

Recent developments in improving the fracture toughness of 3D-printed fiber-reinforced polymer composites

Khan, T., Ali, M., Riaz, Z., Butt, H., Al‐Rub, R. K. A., Dong, Y., & Umer, R. (2024) · Composites Part B Engineering · doi:10.1016/j.compositesb.2024.111622 · Cited by 102

Investigating the hot isostatic pressing of an additively manufactured continuous carbon fiber reinforced PEEK composite

van de Werken, N., Koirala, P., Ghorbani, J., Doyle, D., & Tehrani, M. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101634 · Cited by 99

Additive manufacturing of polyetheretherketone and its composites: A review

Francis, J. N., Banerjee, I., Chugh, A., & Singh, J. (2022) · Polymer Composites · doi:10.1002/pc.26961 · Cited by 99

Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing

Chen, P., Wang, H., Su, J. D., Tian, Y., Wen, S., Su, B., Cao, Y., Chen, B., Zhou, K., Yan, C., et al. (2022) · Advanced Materials · doi:10.1002/adma.202200750 · Cited by 101

Custom design and biomechanical analysis of 3D-printed PEEK rib prostheses

Kang, J., Wang, L., Wang, L., Wang, L., Cao, Y. Q., He, J., & Li, D. (2018) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-018-1015-x · Cited by 96

Influence of Fused Deposition Modelling Nozzle Temperature on the Rheology and Mechanical Properties of 3D Printed β-Tricalcium Phosphate (TCP)/Polylactic Acid (PLA) Composite

Elhattab, K., Bhaduri, S. B., & Sikder, P. (2022) · Polymers · doi:10.3390/polym14061222 · Cited by 95

Parameters Influencing the Outcome of Additive Manufacturing of Tiny Medical Devices Based on PEEK

Wang, Y., Müller, W., Rumjahn, A., & Schwitalla, A. D. (2020) · Materials · doi:10.3390/ma13020466 · Cited by 92

Additive manufacturing of short carbon fiber-reinforced polyamide composites by fused filament fabrication: Formulation, manufacturing and characterization

Abderrafai, Y., Mahdavi, M. H., Sosa-Rey, F., Hérard, C., Navas, I. O., Piccirelli, N., Lévesque, M., & Therriault, D. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110358 · Cited by 89

3D printed antibacterial silver nanowire/polylactide nanocomposites

Bayraktar, I., Doğanay, D., Coşkun, Ş., Kaynak, C., Akca, G., & Ünalan, H. E. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.05.059 · Cited by 88

Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review

Bakır, A. A., Atik, R., & Özerinç, S. (2021) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2020-0061 · Cited by 88

Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties

de Voorde, B. V., Katalagarianakis, A., Huysman, S., Toncheva, A., Raquez, J., Ðuretek, I., Holzer, C., Cardon, L., Bernaerts, K. V., Hemelrijck, D. V., et al. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102518 · Cited by 88

Experimental Design of Sustainable 3D-Printed Poly(Lactic Acid)/Biobased Poly(Butylene Succinate) Blends via Fused Deposition Modeling

Qahtani, M., Wu, F., Misra, M., Gregori, S., Mielewski, D. F., & Mohanty, A. K. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01830 · Cited by 87

Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering

Magri, A. E., Bencaid, S.-E., Vanaei, H. R., & Vaudreuil, S. (2022) · Polymers · doi:10.3390/polym14173674 · Cited by 87

Preliminary Investigation of Poly-Ether-Ether-Ketone Based on Fused Deposition Modeling for Medical Applications

Zhao, F., Li, D., & Jin, Z. M. (2018) · Materials · doi:10.3390/ma11020288 · Cited by 86

Additive manufacturing of continuous carbon fiber reinforced poly-ether-ether-ketone with ultrahigh mechanical properties

Chang, B., Li, X., Parandoush, P., Ruan, S., Shen, C., & Lin, D. L. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106563 · Cited by 86

Effects of FDM parameters and annealing on the mechanical and tribological properties of PEEK

He, Y., Shen, M., Wang, Q., Wang, T., & Pei, X. (2023) · Composite Structures · doi:10.1016/j.compstruct.2023.116901 · Cited by 86

Advancements in 3D printing techniques for biomedical applications: a comprehensive review of materials consideration, post processing, applications, and challenges

Ali, F., Kalva, S. N., & Koç‬, M. (2024) · Discover Materials · doi:10.1007/s43939-024-00115-4 · Cited by 91

Controllable interlayer shear strength and crystallinity of PEEK components by laser-assisted material extrusion

Luo, M., Tian, X., Zhu, W., & Li, D. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.131 · Cited by 84

Influence of sanding and plasma treatment on shear bond strength of 3D-printed PEI, PEEK and PEEK/CF

Li, W., Sang, L., Jian, X., & Wang, J. (2020) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2020.102614 · Cited by 84

Challenges in the Technology Development for Additive Manufacturing in Space

Zocca, A., Wilbig, J., Waske, A., Günster, J., Widjaja, M. P., Neumann, C., Clozel, M., Meyer, A., Ding, J., Zhou, Z., et al. (2022) · Chinese Journal of Mechanical Engineering Additive Manufacturing Frontiers · doi:10.1016/j.cjmeam.2022.100018 · Cited by 88

3D printed continuous carbon fiber reinforced thermoplastic composite sandwich structure with corrugated core for high stiffness/load capability

Um, H.-J., Lee, J.-S., Shin, J.-H., & Kim, H. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.115590 · Cited by 84

3D printing of acellular scaffolds for bone defect regeneration: A review

Ghorbani, F., Li, D., Ni, S., Zhou, Y., & Yu, B. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.100979 · Cited by 84

In situ Consolidation of Carbon Fiber PAEK via Laser-Assisted Automated Fiber Placement

Heathman, N., Koirala, P., Yap, T., Emami, A., & Tehrani, M. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110405 · Cited by 83

The Direct 3D Printing of Functional PEEK/Hydroxyapatite Composites via a Fused Filament Fabrication Approach

Rodzeń, K., Sharma, P. K., McIlhagger, A., Mokhtari, M., Dave, F., Tormey, D., Sherlock, R. J., Meenan, B. J., & Boyd, A. (2021) · Polymers · doi:10.3390/polym13040545 · Cited by 82

Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites

Wang, P., & Zou, B. (2022) · Coatings · doi:10.3390/coatings12060827 · Cited by 82

Additive manufacturing and characterization of high temperature thermoplastic blends for potential aerospace applications

Abderrafai, Y., Diouf-Lewis, A., Sosa-Rey, F., Farahani, R. D., Piccirelli, N., Lévesque, M., & Therriault, D. (2023) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109839 · Cited by 80

Additive manufacturing in the new space economy: Current achievements and future perspectives

Ghidini, T., Grasso, M., Gumpinger, J., Makaya, A., & Colosimo, B. M. (2023) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2023.100959 · Cited by 87

Advanced additive manufacturing in implant dentistry: 3D printing technologies, printable materials, current applications and future requirements

Alqutaibi, A. Y., Alghauli, M. A., Aljohani, M., & Zafar, M. S. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00356 · Cited by 87

Optimization of FDM 3D printing parameters for high strength PEEK using the Taguchi method and experimental validation

Jiang, C., Cheng, Y., Lin, H., Chang, Y.-L., Pasang, T., & Lee, S. (2022) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2021-0166 · Cited by 79

Effects of printing path and material components on mechanical properties of 3D-printed polyether-ether-ketone/hydroxyapatite composites

Zheng, J., Kang, J., Sun, C., Yang, C., Wang, L., & Li, D. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104475 · Cited by 77

Additive Manufacturing of Carbon Fiber-reinforced Composites: A Review

Hu, Y. L., Lin, Y., Yang, L., Wu, S., Tang, D., Yan, C., & Shi, Y. (2023) · Applied Composite Materials · doi:10.1007/s10443-023-10178-w · Cited by 76

Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material

Qu, H., Zhang, W., Li, Z., Hou, L., Li, G., Fuh, J. Y. H., & Wu, W. (2022) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-022-00650-1 · Cited by 34

Effect of 3D Printing Process Parameters and Heat Treatment Conditions on the Mechanical Properties and Microstructure of PEEK Parts

Zhen, H., Zhao, B., Quan, L., & Fu, J. (2023) · Polymers · doi:10.3390/polym15092209 · Cited by 68

Influence of Process Parameters of 3D Printed PEEK on Crystallinity and Mechanical Performances

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-3-031-28547-9_21

Evaluation of the influence of process parameters on crystallinity and tensile strength of 3D printed PEEK parts

Triminì, V., Varetti, S., Percoco, G., Corvaglia, S. G., Gallo, N., & Scavo, I. (2023) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/09544062231198784 · Cited by 2

Effect of printing parameters and heat treatment on the crystallinity of PEEK by fused filament fabrication

Sun, Q., Ma, J., Man, J., Ali, Z., Gao, C., Kamm, P. H., García‐Moreno, F., Tan, X., Yin, K., Eberl, C., et al. (2026) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2026.07.127 · Cited by 1