The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Microarchitected 3D printed polylactic acid (PLA) nanocomposite scaffolds for biomedical applications
Open accessAbstract
Anti-bacterial scaffolds made of copper, bronze and silver particles filled PLA nanocomposites were realized via fused filament fabrication (FFF), additive manufacturing. The thermal, mechanical and biological characteristics including bioactivity and bactericidal properties of the scaffolds were evaluated. The incorporation of bronze particles into the neat PLA increases the elastic modulus up to 10% and 27% for samples printed in 0° and 90° configurations respectively. The stiffness increases, up to 103% for silver filled PLA nanocomposite scaffolds. The surface of scaffolds was treated with acetic acid to create a thin porous network. Significant increase (~20-25%) in the anti-bacterial properties and bioactivity (~18-100%) is attributed to the synergetic effect of reinforcement of metallic/metallic alloy particles and acid treatment. The results indicate that PLA nanocomposites could be a potential candidate for bone scaffold applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Almeida, C. R., Serra, T., Oliveira, M. I., Planell, J. A., Barbosa, M. A., & Navarro, M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.035 · Cited by 290
Nakagaito, A. N., Fujimura, A., Sakai, T., Hama, Y., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.03.004 · Cited by 280
Cited by
Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
Bikiaris, N. D., Koumentakou, I., Samiotaki, C., Meimaroglou, D., Varytimidou, D., Karatza, A., Kalantzis, Z., Roussou, M., Bikiaris, R. D., & Papageorgiou, G. Z. (2023) · Polymers · doi:10.3390/polym15051196 · Cited by 279
Biomaterials / bioinks and extrusion bioprinting
Chen, X. B., Fazel Anvari-Yazdi, A., Duan, X., Zimmerling, A., Gharraei, R., Sharma, N. K., Sweilem, S., & Ning, L. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.06.006 · Cited by 244
Asadollahi, M., Gerashi, E., Zohrevand, M., Zarei, M., Sayedain, S. S., Alizadeh, R., Labbaf, S., & Atari, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00228 · Cited by 59
Metadata
- Authors
- Alam, F., Shukla, V. R., Varadarajan, K. M., & Kumar, S.
- Venue
- Journal of the Mechanical Behavior of Biomedical Materials
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 103
- Pages
- 103576
- ISSN
- 1751-6161 (ISSN-L)
- OpenAlex
- W2993197710
- Cited by
- 212
- References
- 2
- FWCI
- 6.63
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Microarchitected 3D printed polylactic acid (PLA) nanocomposite scaffolds for biomedical applications. https://app.cochat.ai/papers/10.1016/j.jmbbm.2019.103576
- The paper
- Alam, F., Shukla, V. R., Varadarajan, K. M., & Kumar, S. (2020). Microarchitected 3D printed polylactic acid (PLA) nanocomposite scaffolds for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials. https://doi.org/10.1016/j.jmbbm.2019.103576
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.