The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: Simulations & experiments
Abstract
A novel family of smooth-shell structures is introduced as mechanical metamaterials of exceptional specific energy absorption capacity. The proposed shell structures respect all symmetries of the face-centered cubic crystal. To obtain a smooth curvature shell structure, the exact shape of the shell mid-plane is determined through the minimization of a bending-energy based measure of the overall curvature. Among the members of this new family, the mechanical properties of a Triply Periodic Minimal Surface (TPMS) -like architecture and an elastically-isotropic derivate are investigated in detail. The TPMS-like structure showed important anisotropy in both its small and large strain responses, with loading-direction dependent differences in stiffness of more than 100%. The mechanical properties of the elastically-isotropic shell-lattice turned out to be close to the mean value for all directions of loading for the TPMS-like structures. For relative densities ranging from 1% to 50%, the shell-lattices always exhibited a higher mechanical performance than truss-lattices of equal density. For relative densities greater than 20%, the mechanical response of the shell-lattices is more stable than that of truss-lattices which makes them particularly suitable as higher order structures in hierarchical metamaterial design. The computational results are partially confirmed through compression experiments on additively-manufactured stainless steel specimens. A direct comparison of the stress–strain curve of additively-manufactured stainless steel 316 L with that of sheets made from the same alloy revealed an increase in yield strength of about 30% related to the selective laser melting process.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A variational approach to the theory of the elastic behaviour of multiphase materials
Hashin, Z., & Shtrikman, S. (1963) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(63)90060-7 · Cited by 5,882
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Foam topology: bending versus stretching dominated architectures
Deshpande, V. S., Ashby, M. F., & Fleck, N. A. (2001) · Acta Materialia · doi:10.1016/s1359-6454(00)00379-7 · Cited by 1,623
Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness
Berger, J. B., Wadley, H. N. G., & McMeeking, R. M. (2017) · Nature · doi:10.1038/nature21075 · Cited by 914
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Resilient 3D hierarchical architected metamaterials
Meza, L. R., Zelhofer, A. J., Clarke, N., Mateos, A. J., Kochmann, D. M., & Greer, J. R. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509120112 · Cited by 706
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Tancogne‐Dejean, T., Diamantopoulou, M., Gorji, M. B., Bonatti, C., & Mohr, D. (2018) · Advanced Materials · doi:10.1002/adma.201803334 · Cited by 506
Self-citationPeriodic area-minimizing surfaces in block copolymers
Thomas, E. L., Anderson, D. M., Henkee, C. S., & Hoffman, D. (1988) · Nature · doi:10.1038/334598a0 · Cited by 462
A New Type of Low Density Material: Shellular
Han, S. C., Lee, J. W., & Kang, K. (2015) · Advanced Materials · doi:10.1002/adma.201501546 · Cited by 328
Tancogne‐Dejean, T., & Mohr, D. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.03.027 · Cited by 299
Self-citationThe Influence of Processing Parameters on the Mechanical Properties of SLM Parts
Hanzl, P., Zetek, M., Bakša, T., & Kroupa, T. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.01.510 · Cited by 291
Bonatti, C., & Mohr, D. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.02.003 · Cited by 275
Self-citationAl-Ketan, O., Adel Assad, M., & Abu Al-Rub, R. K. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.05.026 · Cited by 200
Ultra-strong architected Cu meso-lattices
Wendy Gu, X., & Greer, J. R. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.01.006 · Cited by 182
Advanced Micro‐Lattice Materials
Xiong, J., Mines, R., Ghosh, R., Vaziri, A., Ma, L., Ohrndorf, A., Christ, H., & Wu, L. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201400471 · Cited by 174
Dalaq, A. S., Abueidda, D., Al‐Rub, R. K. A., & Jasiuk, I. (2016) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2016.01.011 · Cited by 136
Periodic Bicontinuous Composites for High Specific Energy Absorption
Lee, J., Wang, L., Boyce, M. C., & Thomas, E. L. (2012) · Nano Letters · doi:10.1021/nl302234f · Cited by 126
Mapping local deformation behavior in single cell metal lattice structures
Carlton, H. D., Lind, J. F., Messner, M. C., Volkoff-Shoemaker, N. A., Barnard, H. S., Barton, N. R., & Kumar, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.023 · Cited by 82
Mechanical properties of copper octet-truss nanolattices
He, Z., Wang, F., Zhu, Y., Wu, H., & Park, H. S. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.01.019 · Cited by 81
Multiscale structural design of columns made of regular octet-truss lattice material
ElSayed, M. S. A., & Pasini, D. (2010) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2010.03.003 · Cited by 75
Maldovan, M., Ullal, C. K., Jang, J., & Thomas, E. L. (2007) · Advanced Materials · doi:10.1002/adma.200700811 · Cited by 62
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Inverse-designed spinodoid metamaterials
Kumar, S., Tan, S., Zheng, L., & Kochmann, D. M. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0341-6 · Cited by 444
Metadata
- Authors
- Bonatti, C., & Mohr, D.
- Venue
- Journal of the Mechanics and Physics of Solids
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 122
- Pages
- 1-26
- ISSN
- 0022-5096 (ISSN-L)
- OpenAlex
- W2888972551
- Cited by
- 330
- References
- 24
- FWCI
- 15.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.