The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Review on effect of heat input for wire arc additive manufacturing process
Open accessAbstract
Wire arc additive manufacturing (WAAM) is steadily increasing with significant research work are underway. The ability of WAAM to manufacture a large-scale product at a lower cost and shorter lead times has increased its development. The efficiency or potential of WAAM to become a new lead in the additive manufacturing industry is believed to be realized by a few factors. High efficiency and performance require a higher metal deposition rate, which implies higher heat input that negatively affects the manufacturing process. This paper review works for factors associated with heat input on the WAAM process. The factor affecting these properties were explained to identify the optimized WAAM process in terms of heat input. The paper focuses on the impact of heat input on the macrostructure, microstructure and mechanical properties of the parts deposited in the WAAM process. This review also discussed the effect of heat input used by eight different types of arc welding technologies, with appropriate use of wire materials. The study also highlights that heat input affected the microstructure of the WAAM, causing significant changes in grain structure, grain size and pore area percentage. Besides, it can be suggested that grain structure has a strong influence on the WAAM materials' mechanical properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
PRISMA-P Group, Moher, D., Shamseer, L., Clarke, M., Ghersi, D., Liberati, A., Petticrew, M., Shekelle, P., & Stewart, L. A. (2015) · Systematic Reviews · doi:10.1186/2046-4053-4-1 · Cited by 26,223
The rise of 3-D printing: The advantages of additive manufacturing over traditional manufacturing
Attaran, M. (2017) · Business Horizons · doi:10.1016/j.bushor.2017.05.011 · Cited by 1,822
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Thompson, S. M., Bian, L., Shamsaei, N., & Yadollahi, A. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2015.07.001 · Cited by 1,179
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Rodrigues, T. A., Duarte, V., Miranda, R. M., Santos, T. G., & Oliveira, J. P. (2019) · Materials · doi:10.3390/ma12071121 · Cited by 779
Rapid manufacturing of metal components by laser forming
Santos, E. C., Shiomi, M., Osakada, K., & Laoui, T. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.09.005 · Cited by 740
Wu, B., Ding, D., Pan, Z. S., et al. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.07.037 · Cited by 352
Brandl, E., Baufeld, B., Leyens, C., & Gault, R. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.087 · Cited by 348
Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing
Ding, D., Pan, Z. S., van Duin, S., Li, H., & Shen, C. (2016) · Materials · doi:10.3390/ma9080652 · Cited by 238
Cited by
Wire arc additive manufacturing of low alloyed steels, copper aluminum alloys, and their bimetals
Karamimoghadam, M., Aghayar, Y., Forooghi, F., Denora, V., Mohammadi, M., Contuzzi, N., & Casalino, G. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-16436-4 · Cited by 18
Metadata
- Authors
- Rosli, N. A., Alkahari, M. R., Abdollah, M. F. B., Maidin, S., Ramli, F. R., & Herawan, S. G.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 11
- Pages
- 2127-2145
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W3128858548
- Cited by
- 322
- References
- 28
- FWCI
- 20.59
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review on effect of heat input for wire arc additive manufacturing process. https://app.cochat.ai/papers/10.1016/j.jmrt.2021.02.002
- The paper
- Rosli, N. A., Alkahari, M. R., Abdollah, M. F. B., Maidin, S., Ramli, F. R., & Herawan, S. G. (2021). Review on effect of heat input for wire arc additive manufacturing process. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2021.02.002
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
