Atomic layer deposition and other thin film deposition techniques: from principles to film properties
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Thin film is a modern technology aimed at improving the structural, electrical, magnetic, optical, and mechanical properties of bulk materials. This technology has so far found applications in integrated circuits, semiconductor devices, transistors, light-emitting diodes, light crystal displays and photoconductors , rectifiers, solar cells, sensors, and micro-electromechanical systems (MEMS). Methods of thin film deposition such as physical and chemical vapor deposition (PVD and CVD), sputtering, spin and dip coatings, and spray pyrolysis have been utilized for several years. But in recent times, the atomic layer deposition (ALD) technique has attracted the attention of researchers. In this current review, we have explored the most used techniques in the depositions of thin film materials with a focus on the properties of film produced, and the advantages and disadvantages of each technique. Generally, it was observed that the quality of films produced by these techniques depends greatly on the choice of substrate, deposition temperature, temperature window, and precursor used. It concluded by identifying ALD as an optimum technique in depositing ultra-thin film materials due to its simplicity, reproducibility, control over film composition and thickness, and high conformal deposited films at the atomic level. This study has established the opportunity for upcoming researchers to have an insight of selecting the most suitable technique for their study in various fields of research. Finally, the challenges and future perspectives of deposition techniques were highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rare-earth nickelates R NiO 3 : thin films and heterostructures
Catalano, S., Gibert, M., Fowlie, J., Íñiguez, J., Triscone, J.-M., & Kreisel, J. (2018) · Reports on Progress in Physics · doi:10.1088/1361-6633/aaa37a · Cited by 453
Cited by
Esposito, F., Burnat, D., Mihalcea, R., Negut, D., Srivastava, A., Campopiano, S., Sansone, L., Giordano, M., Stancalie, A., Iadicicco, A., et al. (2024) · Optics & Laser Technology · doi:10.1016/j.optlastec.2024.111019 · Cited by 14
Giordano, L., Merízio, L. G., de Mattos, E. A., Nicolai, Y. M., da Silva, V. M. P., Marques, I. D., Teixeira, V. C., Bonturim, E., Gonçalves, R. R., Manzani, D., et al. (2026) · Advanced Optical Materials · doi:10.1002/adom.202503550 · Cited by 5
Metadata
- Authors
- Oke, J. A., & Jen, T.-C.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2022-11
- Volume
- 21
- Pages
- 2481-2514
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W4306770847
- Cited by
- 206
- References
- 1
- FWCI
- 10.10
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.