CoChat

3D printing of PLA-TPU with different component ratios: Fracture toughness, mechanical properties, and morphology

Open access
Rahmatabadi, D., Ghasemi, I., Baniassadi, M., Abrinia, K., Baghani, M. · 2022 · Journal of Materials Research and Technology
Cited by 235

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

In this study, three PLA-TPU compounds were prepared by the melt mixing method and after the process of compounding, filament preparation, and 3D printing with Fused Deposition Modeling (FDM). The mechanical properties under compression, tensile, bending, shear modes, and fracture toughness were comprehensively and experimentally assessed. Also, for thermal analysis and microstructural evaluation, Dynamic Mechanical Thermal Analysis (DMTA) and Scanning Electron Microscopy (SEM) were used. The thermal analysis of the PLA-TPU compounds showed an increase and decrease in the loss and storage modulus with increasing PLA value, while all compounds had almost the same glass transition temperature. The results of mechanical tests showed that by raising the amount of PLA, the strength and formability increased and decreased, respectively in all loading modes. The UTS values for PLA50, PLA70, and PLA90 were achieved 27.27 MPa, 40.91 MPa, and 54.18 MPa, respectively. Also, the fracture toughness results were consistent with the mechanical properties. The PLA90 had 1.69 and 2.36 times higher fracture toughness than the PLA70 and PLA50 compounds, respectively. SEM images showed that with the increase in the amount of TPU, the voids caused by the printing and neck growth due to the incomplete integration of the inter and intralayer rasters rises, which is the reason for the decrease in strength and printability. The shear test results also confirmed the SEM images quantitatively and showed that the connection between the layers and density improves with increasing the amount of PLA.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jmrt.2022.11.024

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 235

Metadata

Authors
Rahmatabadi, D., Ghasemi, I., Baniassadi, M., Abrinia, K., & Baghani, M.
Venue
Journal of Materials Research and Technology
Publisher
Elsevier BV
Published
2022-11
Volume
21
Pages
3970-3981
ISSN
  • 2214-0697 (ISSN-L)
  • 2238-7854
OpenAlex
W4308579523
Cited by
235
References
2
FWCI
11.52
Type
journal article
Language
en
Open access
gold

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.