The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
Progress in additive manufacturing on new materials: A review
Abstract
Abstract Recent efforts and advances in additive manufacturing (AM) on different types of new materials are presented and reviewed. Special attention is paid to the material design of cladding layers, the choice of feedstock materials, the metallurgical behavior and synthesis principle during the AM process, and the resulted microstructures and properties, as well as the relationship between these factors. Thereafter, the trend of development in the future is forecasted, including: Effects of the particles size and size distribution of powders; Approaches for producing fine microstructures; Opportunities for creating new materials by AM; Wide applications in reconditioning of damaged components; Challenges for deep understanding and applications of the AMed new materials. The idea of “Develop Materials” or “Create Materials” by AM is highlighted, but a series of scientific, technological and engineering problems remain to be solved in future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Materials Science of Thin Films
Ohring, M. (2002) · Elsevier eBooks · doi:10.1016/b978-0-12-524975-1.x5000-9 · Cited by 2,931
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
Amato, K. N., Gaytan, S. M., Murr, L. E., Martinez, E., Shindo, P. W., Hernandez, J., Collins, S., & Medina, F. (2012) · Acta Materialia · doi:10.1016/j.actamat.2011.12.032 · Cited by 1,166
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Yang, C., Wang, Q., & Li, D. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.05.032 · Cited by 1,162
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Additive manufacturing of metallic components by selective electron beam melting — a review
Körner, C. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1176289 · Cited by 1,106
Exploration and Development of High Entropy Alloys for Structural Applications
Miracle, D., Miller, J., Senkov, O., Woodward, C., Uchic, M., & Tiley, J. (2014) · Entropy · doi:10.3390/e16010494 · Cited by 1,012
Creep resistance of CMSX-3 nickel base superalloy single crystals
Pollock, T. M., & Argon, A. S. (1992) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(92)90195-k · Cited by 1,000
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Wang, Z., Guan, K., Gao, M., Li, X., Chen, X., & Zeng, X. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.107 · Cited by 812
The materials science of thin films
(1992) · Choice Reviews Online · doi:10.5860/choice.30-0953 · Cited by 797
A review of very-high-temperature Nb-silicide-based composites
Bewlay, B. P., Jackson, M. R., Subramanian, P. R., & Zhao, J. C. (2003) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-003-0269-8 · Cited by 728
Tan, X., Kok, Y., Tan, Y. J., Descoins, M., Mangelinck, D., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.036 · Cited by 718
Lu, K. (2010) · Science · doi:10.1126/science.1185866 · Cited by 717
Parametric analysis of the selective laser melting process
Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.02.088 · Cited by 650
Spierings, A. B., Herres, N., & Levy, G. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111124770 · Cited by 614
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Baufeld, B., Brandl, E., & der Biest, O. V. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.01.018 · Cited by 537
Murr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., Medina, F., Collins, S., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.11.032 · Cited by 526
3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance
Yang, C., Tian, X., Liu, T., Cao, Y., & Li, D. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0098 · Cited by 515
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.03.006 · Cited by 423
Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing
Spierings, A. B., Voegtlin, M., Bauer, T., & Wegener, K. (2015) · Progress in Additive Manufacturing · doi:10.1007/s40964-015-0001-4 · Cited by 415
Solid-state additive manufacturing and repairing by cold spraying: A review
Li, W., Yang, K., Yin, S., Yang, X., Xu, Y., & Lupoi, R. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.09.015 · Cited by 414
Study on microstructure and mechanical properties of laser rapid forming Inconel 718
Zhao, X., Chen, J., Lin, X., & Huang, W. (2008) · Materials Science and Engineering: A · doi:10.1016/j.msea.2007.05.079 · Cited by 401
Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
Wilkes, J., Hagedorn, Y., Meiners, W., & Wissenbach, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311292736 · Cited by 398
Additive fabrication technologies applied to medicine and health care: a review
Giannatsis, J., & Dedoussis, V. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-1308-1 · Cited by 389
Schmidtke, K., Palm, F., Hawkins, A., & Emmelmann, C. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.047 · Cited by 389
Fabrication of functionally graded TiC/Ti composites by Laser Engineered Net Shaping
Liu, W., & DuPont, J. N. (2003) · Scripta Materialia · doi:10.1016/s1359-6462(03)00020-4 · Cited by 379
Self-citationEpitaxy and Microstructure Evolution in Metal Additive Manufacturing
Basak, A., & Das, S. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031728 · Cited by 363
Recent advances in 3D printing of porous ceramics: A review
Hwa, L. C., Rajoo, S., Noor, A. M., Ahmad, N., & Uday, M. B. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2017.08.002 · Cited by 343
Wei, K., Gao, M., Wang, Z., & Zeng, X. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.05.092 · Cited by 330
Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication
Murr, L. E. (2016) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2016.08.011 · Cited by 329
Murr, L. E., Martinez, E., Gaytan, S. M., Ramirez, D. A., Machado, B. I., Shindo, P. W., Martinez, J. L., Medina, F., Wooten, J., Ciscel, D., et al. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0748-2 · Cited by 291
Concept and P/M fabrication of functionally gradient materials
Kawasaki, A., & Watanabe, R. (1997) · Ceramics International · doi:10.1016/0272-8842(95)00143-3 · Cited by 284
Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.06.061 · Cited by 280
Net shaped high performance oxide ceramic parts by selective laser melting
Yves-Christian, H., Jan, W., Wilhelm, M., Konrad, W., & Reinhart, P. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.086 · Cited by 276
High density selective laser melting of Waspaloy®
Mumtaz, K. A., Erasenthiran, P., & Hopkinson, N. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.04.117 · Cited by 245
Rickenbacher, L., Etter, T., Hövel, S., & Wegener, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311323281 · Cited by 239
Hao, L., Dadbakhsh, S., Seaman, O., & Felstead, M. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.06.012 · Cited by 233
Brandl, E., Palm, F., Michailov, V., Viehweger, B., & Leyens, C. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.06.062 · Cited by 230
Facchini, L., Vicente, N., Lonardelli, I., Magalini, E., Robotti, P., & Molinari, A. (2010) · Advanced Engineering Materials · doi:10.1002/adem.200900259 · Cited by 218
3D-imaging of selective laser melting defects in a Co–Cr–Mo alloy by synchrotron radiation micro-CT
Zhou, X., Wang, D., Liu, X., Zhang, D., Qu, S., Ma, J., London, G., Shen, Z., & Liu, W. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.014 · Cited by 216
Self-citationLaser cladding of turbine blades
Shepeleva, L., Medres, B., Kaplan, W. D., Bamberger, M., & Weisheit, A. (2000) · Surface and Coatings Technology · doi:10.1016/s0257-8972(99)00603-9 · Cited by 206
Zhu, Y., Tian, X., Li, J., & Wang, H. (2015) · Materials & Design · doi:10.1016/j.matdes.2014.11.001 · Cited by 203
Shiratori, H., Fujieda, T., Yamanaka, K., Koizumi, Y., Kuwabara, K., Kato, T., & Chiba, A. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.01.019 · Cited by 203
Fujieda, T., Shiratori, H., Kuwabara, K., Kato, T., Yamanaka, K., Koizumi, Y., & Chiba, A. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.06.046 · Cited by 194
Alumina–zirconium ceramics synthesis by selective laser sintering/melting
Shishkovsky, I., Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.09.001 · Cited by 186
Wear behavior and microstructure of hypereutectic Al-Si alloys prepared by selective laser melting
Kang, N., Coddet, P., Liao, H., Baur, T., & Coddet, C. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.03.221 · Cited by 178
Ma, Y., Cuiuri, D., Hoye, N., Li, H., & Pan, Z. S. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.02.051 · Cited by 167
Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy
Löber, L., Schimansky, F. P., Kühn, U., Pyczak, F., & Eckert, J. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.04.002 · Cited by 166
Additive Manufacturing of High-Entropy Alloys by Laser Processing
Ocelík, V., Janssen, N., Smith, S. N., & De Hosson, J. T. M. (2016) · JOM · doi:10.1007/s11837-016-1888-z · Cited by 166
Processing conditions and microstructural features of porous 316L stainless steel components by DMLS
Gu, D., & Shen, Y. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.06.118 · Cited by 163
Li, W., Liu, J., Zhou, Y., Li, S., Wen, S., Wei, Q., Yan, C., & Shi, Y. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.07.206 · Cited by 157
Zhao, X., Lin, X., Chen, J., Xue, L., & Huang, W. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.12.024 · Cited by 154
In vitro -Osteoclastic Activity Studies on Surfaces of 3D Printed Calcium Phosphate Scaffolds
Detsch, R., Schaefer, S., Deisinger, U., Ziegler, G., Seitz, H., & Leukers, B. (2010) · Journal of Biomaterials Applications · doi:10.1177/0885328210373285 · Cited by 152
Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting
Murr, L. E., Martinez, E., Pan, X., Gaytan, S. M., de Castro, J. A., Terrazas, C. A., Medina, F. R., Wicker, R. B., & Abbott, D. H. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.002 · Cited by 145
Sun, S.-H., Koizumi, Y., Kurosu, S., Li, Y., & Chiba, A. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.012 · Cited by 145
Additive layer manufacture of Inconel 625 metal matrix composites, reinforcement material evaluation
Cooper, D. E., Blundell, N., Maggs, S. J., & Gibbons, G. J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.06.021 · Cited by 138
Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel
Lin, X., Cao, Y., Wu, X., Yang, H., Chen, J., & Huang, W. (2012) · Materials Science and Engineering A · doi:10.1016/j.msea.2012.05.095 · Cited by 135
Bi, G., Sun, C., Chen, H.-C., Ng, F. L., & Khin, C. C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.04.020 · Cited by 135
Li, Q., Lei, Y., & Fu, H. (2013) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2013.11.026 · Cited by 123
Effect of particle size gradation on the performance of glass-ceramic 3D printing process
Sun, C., Tian, X., Wang, L., Liu, Y., Wirth, C. M., Günster, J., Li, D., & Jin, Z. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.09.197 · Cited by 120
Direct laser cladding of SiC dispersed AISI 316L stainless steel
Majumdar, J. D., Kumar, A., & Li, L. (2008) · Tribology International · doi:10.1016/j.triboint.2008.10.016 · Cited by 109
Li, W., Liu, J., Wen, S., Wei, Q., Yan, C., & Shi, Y. (2016) · Materials Characterization · doi:10.1016/j.matchar.2016.01.012 · Cited by 102
Tian, Y., Chen, C. Z., Chen, L. X., & Huo, Q. (2005) · Scripta Materialia · doi:10.1016/j.scriptamat.2005.11.011 · Cited by 100
3D printing of ceramic implants
Vorndran, E., Moseke, C., & Gbureck, U. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.326 · Cited by 98
Acharya, R., Bansal, R., Gambone, J. J., & Das, S. (2014) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-014-0117-9 · Cited by 97
Microstructural control during direct laser deposition of a β-titanium alloy
Qiu, C., Ravi, G. A., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.05.031 · Cited by 92
Development of highly porous titanium scaffolds by selective laser melting
Wang, Y., Shen, Y., Wang, Z., Yang, J., Liu, N., & Wenrong, H. (2010) · Materials Letters · doi:10.1016/j.matlet.2009.12.035 · Cited by 87
Guo, Y., Jia, L., Sun, S., Kong, B., Liu, J., & Zhang, H. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.048 · Cited by 86
Design of experiments approach in AZ31 powder selective laser melting process optimization
Pawlak, A., Rosienkiewicz, M., & Chlebus, E. (2016) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2016.07.007 · Cited by 86
Li, R., Li, Z., Huang, J., & Zhu, Y. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.04.144 · Cited by 83
Industrial laser cladding: current state and future
Михайлович, Б. Е., Москвитин, Г. В., Polyakov, A. N., & Arkhipov, V. E. (2011) · Welding International · doi:10.1080/09507116.2010.540880 · Cited by 82
Characterizations and anisotropy of cold-spraying additive-manufactured copper bulk
Yang, K., Li, W., Guo, X., Yang, X., & Xu, Y. (2018) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2018.01.002 · Cited by 81
LIJAY, K. J., Selvam, J. D. R., Dinaharan, I., & Vijay, S. J. (2016) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(16)64255-3 · Cited by 78
Microstructure and mechanical properties of a graded structural material
Ren, H. S., Liu, D., Tang, H., Tian, X., Zhu, Y. Y., & Wang, H. M. (2014) · Materials Science and Engineering A · doi:10.1016/j.msea.2014.06.016 · Cited by 70
Gu, D., Shen, Y., & Meng, G. (2009) · Materials Letters · doi:10.1016/j.matlet.2009.08.043 · Cited by 56
Laser 3D micro/nanofabrication of polymers for tissue engineering applications
Danilevičius, P., Rekštytė, S., Balčiūnas, E., Kraniauskas, A., Širmenis, R., Baltriukienė, D., Bukelskienė, V., Gadonas, R. A., Sirvydis, V. J., Piskarskas, A., et al. (2012) · Optics & Laser Technology · doi:10.1016/j.optlastec.2012.05.038 · Cited by 54
Jerrard, P. G. E., Hao, L., & Evans, K. E. (2009) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem1574 · Cited by 54
Qu, X., Xia, P., He, J., & Li, D. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.09.035 · Cited by 52
Kenel, C., Dawson, K., Barras, J., Hauser, C., Dasargyri, G., Bauer, T., Colella, A., Spierings, A. B., Tatlock, G. J., Leinenbach, C., et al. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.07.004 · Cited by 51
A study on the effect of ultrasonic vibration in nanosecond laser machining
Kang, B., Kim, G. W., Yang, M., Cho, S.-H., & Park, J. K. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.06.013 · Cited by 50
Acharya, R., Bansal, R., Gambone, J. J., & Das, S. (2014) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-014-0226-5 · Cited by 44
Vibration assisted femtosecond laser machining on metal
Park, J. K., Yoon, J., & Cho, S.-H. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.01.017 · Cited by 40
Chunping, H., Xin, L., Fencheng, L., Cao, J., Fenggang, L., & Weidong, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7453-z · Cited by 27
Cited by
Additive manufacturing of high entropy alloys: A practical review
Ostovari Moghaddam, A., Shaburova, N. A., Samodurova, M. N., Abdollahzadeh, A., & Trofimov, E. A. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.11.029 · Cited by 474
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
A review of various materials for additive manufacturing: Recent trends and processing issues
Srivastava, M., Rathee, S., Patel, V., Kumar, A., & Koppad, P. G. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.10.015 · Cited by 311
Metadata
- Authors
- Li, N., Huang, S., Zhang, G., Qin, R., Liu, W., Xiong, H., Shi, G., & Blackburn, J.
- Venue
- Journal of Materials Science & Technology
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 35
- Issue
- 2
- Pages
- 242-269
- ISSN
- 1005-0302 (ISSN-L)
- OpenAlex
- W2891474511
- Cited by
- 776
- References
- 96
- FWCI
- 41.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.