The DOI matches its Crossref record.
High temperature material properties of IN738LC processed by selective laser melting (SLM) technology
Abstract
Purpose: Selective laser melting (SLM) is being investigated by Alstom and IWF due to its flexibility, cost‐ and lead‐time reduction potential for reconditioning of hot gas path components used in today's heavy‐duty gas turbines. This paper aims to address this issue. Design/methodology/approach: Tensile tests as well as relaxation and creep tests were carried out to assess SLM processed IN738LC for use in high temperature applications. To evaluate potential anisotropic material behaviour resulting from the layer‐wise build up process, all specimens were built in two directions: parallel and perpendicular to the build direction, respectively. Furthermore, extensive metallurgical investigations were made to analyse the chemical homogeneity as well as the correlation between microstructure and high temperature properties of SLM processed IN738LC. Findings: Tensile tests showed that strength properties superior to cast IN738LC can be achieved by processing this material by SLM alternatively. Due to differences in grain size, grain orientation as well as γ′size and morphology the relaxation behaviour of SLM specimens is inferior compared to cast material. However, creep tests have shown that values within the lower scatter band of cast material can still be achieved along the build direction. Originality/value: Very limited knowledge exists regarding the processing of γ′precipitation‐strengthened nickel‐base superalloys by SLM and the resulting high temperature material properties. Layered manufacturing and any lack‐of‐fusion porosity influences them as well as high temperature gradients, occurring during the process. This article presents the latest insights from material testing of selective laser molten IN738LC at elevated temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Progress in additive manufacturing on new materials: A review
Li, N., Huang, S., Zhang, G., Qin, R., Liu, W., Xiong, H., Shi, G., & Blackburn, J. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.002 · Cited by 776
Harrison, N. J., Todd, I., & Mumtaz, K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.04.035 · Cited by 690
Metadata
- Authors
- Rickenbacher, L., Etter, T., Hövel, S., & Wegener, K.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2013-06-07
- Volume
- 19
- Issue
- 4
- Pages
- 282-290
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2026557527
- Cited by
- 239
- References
- 0
- FWCI
- 11.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High temperature material properties of IN738LC processed by selective laser melting (SLM) technology. https://app.cochat.ai/papers/10.1108/13552541311323281
- The paper
- Rickenbacher, L., Etter, T., Hövel, S., & Wegener, K. (2013). High temperature material properties of IN738LC processed by selective laser melting (SLM) technology. Rapid Prototyping Journal. https://doi.org/10.1108/13552541311323281
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.