The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance
Abstract
This paper presents a comprehensive study conducted to optimize the selective laser melting (SLM) parameters and subsequent heat-treatment temperatures for near-α high-temperature titanium alloy Ti-6Al-2Zr-1Mo-1 V (TA15), which is widely used in the aerospace industry. Based on the surface morphology and relative density analysis, the optimized process parameters were: laser power from 230 W to 380 W, scan speed from 675 mm/s to 800 mm/s, scan spacing of 0.12 mm, and layer thickness of 0.03 mm. The effects of the laser power and the layer thickness on the phase constitutions, microstructure features, as well as room-temperature and high-temperature (500 °C) tensile properties, were then studied to obtain an in-depth understanding of SLM-built TA15. Six typical temperatures (650, 750, 850, 950, 1000 and 1100 °C) covering three representative temperature ranges, i.e., martensite partial decomposition temperature range, martensite complete decomposition temperature range and above β transus temperature, were subsequently selected as heat-treatment temperatures. The heat treatment-microstructure-mechanical property relationships of SLM-built TA15 were elucidated in detail. These results provide valuable information on the development of SLM-built TA15 alloy for industrial applications, and these findings are also beneficial to additive manufacturing of other near-α Ti alloys with desirable high-temperature properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Liverani, E., Toschi, S., Ceschini, L., & Fortunato, A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.05.042 · Cited by 990
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Yang, J., Yu, H., Yin, J., Gao, M. X., Wang, Z., & Zeng, X. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.117 · Cited by 913
Qiu, C., Adkins, N. J. E., & Attallah, M. M. (2013) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.04.099 · Cited by 821
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Modelling beta transus temperature of titanium alloys using artificial neural network
Guo, Z., Malinov, S., & Sha, W. (2004) · Computational Materials Science · doi:10.1016/j.commatsci.2004.05.004 · Cited by 112
Cai, C., Song, B., Xue, P., Wei, Q., Yan, C., & Shi, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.092 · Cited by 74
Self-citation
Cited by
Yang, Y., Chen, H., Heidari, A. A., & Gandomi, A. H. (2021) · Expert Systems with Applications · doi:10.1016/j.eswa.2021.114864 · Cited by 1,062
Self-citationWang, J., Zhu, R., Liu, Y., & Zhang, L. (2023) · Advanced Powder Materials · doi:10.1016/j.apmate.2023.100137 · Cited by 484
Melting process of nanoparticle enhanced PCM through storage cylinder incorporating fins
Li, F., Almarashi, A., Jafaryar, M., Hajizadeh, M. R., & Chu, Y.-M. (2021) · Powder Technology · doi:10.1016/j.powtec.2020.12.026 · Cited by 184
Metadata
- Authors
- Cai, C., Wu, X., Liu, W., Zhu, W., Chen, H., Qiu, J. C. D., Sun, C.-N., Liu, J., Wei, Q., & Shi, Y.
- Venue
- Journal of Materials Science & Technology
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 57
- Pages
- 51-64
- ISSN
- 1005-0302 (ISSN-L)
- OpenAlex
- W3025149229
- Cited by
- 260
- References
- 9
- FWCI
- 20.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance. https://app.cochat.ai/papers/10.1016/j.jmst.2020.05.004
- The paper
- Cai, C., Wu, X., Liu, W., Zhu, W., Chen, H., Qiu, J. C. D., Sun, C.-N., Liu, J., Wei, Q., & Shi, Y. (2020). Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance. Journal of Materials Science & Technology. https://doi.org/10.1016/j.jmst.2020.05.004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.