The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
MES-integrated digital twin frameworks
Open accessAbstract
Abstract Industry 4.0-based manufacturing systems are equipped with Cyber-Physical Systems that are characterized by a strong interlinkage between the real world and the digital one: actions in one world have an impact on the other. In this paradigm, Digital Twins (DT) are defined as simulation models that are both getting data from the field and triggering actions on the physical equipment. However, most of the claimed DT in literature are only replicating the real system in a synchronized fashion, without feeding back actions on the control system of the equipment. In literature, these are referred to as Digital Shadows (DS). The paper proposes a way to integrate a DS simulation model with the Manufacturing Execution System (MES) in this way creating a DT. The MES-integrated DT is used for decision making thanks to the presence of an intelligence layer that hosts the rules and the knowledge to choose among alternatives. The paper proposes two frameworks based on the MES-integrated DT: one for managing error states and one for triggering disassembly processes as a consequence of low assembly quality. The DT simulation is developed and integrated with the MES of the Industry 4.0 Laboratory at the School of Management of Politecnico di Milano, where the proposed frameworks have been tested and validated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Digital Twin: Mitigating Unpredictable, Undesirable Emergent Behavior in Complex Systems
Grieves, M., & Vickers, J. (2017) · Transdisciplinary Perspectives on Complex Systems · doi:10.1007/978-3-319-38756-7_4 · Cited by 3,727
Digital Twin in manufacturing: A categorical literature review and classification
Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2018.08.474 · Cited by 3,612
Enabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
About The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474
Review of digital twin applications in manufacturing
Cimino, C., Negri, E., & Fumagalli, L. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.103130 · Cited by 874
Self-citationLife Cycle Simulation for the design of Product–Service Systems
Garetti, M., Rosa, P., & Terzi, S. (2012) · Computers in Industry · doi:10.1016/j.compind.2012.02.007 · Cited by 156
FMU-supported simulation for CPS Digital Twin
Negri, E., Fumagalli, L., Cimino, C., & Macchi, M. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2018.12.033 · Cited by 89
Self-citationFramework for simulation software selection
Fumagalli, L., Polenghi, A., Negri, E., & Roda, I. (2019) · Journal of Simulation · doi:10.1080/17477778.2019.1598782 · Cited by 33
Self-citation
Cited by
Digital Twins: A Survey on Enabling Technologies, Challenges, Trends and Future Prospects
Mihai, S., Yaqoob, M., Hung, D. V., Davis, W., Towakel, P., Raza, M., Karamanoglu, M., Barn, B., Shetve, D., Prasad, R. V., et al. (2022) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2022.3208773 · Cited by 1,049
Digital twin: benefits, use cases, challenges, and opportunities
Attaran, M., & Celik, B. G. (2023) · Decision Analytics Journal · doi:10.1016/j.dajour.2023.100165 · Cited by 704
Rathore, M. M., Shah, S. A., Shukla, D., Bentafat, E., & Bakiras, S. (2021) · IEEE Access · doi:10.1109/access.2021.3060863 · Cited by 616
Digital Twin applications toward Industry 4.0: A Review
Javaid, M., Haleem, A., & Suman, R. (2023) · Cognitive Robotics · doi:10.1016/j.cogr.2023.04.003 · Cited by 421
Liu, X., Jiang, D., Tao, B., Xiang, F., Jiang, G., Sun, Y., Kong, J., & Li, G. (2023) · Advanced Engineering Informatics · doi:10.1016/j.aei.2023.101876 · Cited by 351
Metadata
- Authors
- Negri, E., Berardi, S., Fumagalli, L., & Macchi, M.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 56
- Pages
- 58-71
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W3029080454
- Cited by
- 190
- References
- 8
- FWCI
- 15.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: MES-integrated digital twin frameworks. https://app.cochat.ai/papers/10.1016/j.jmsy.2020.05.007
- The paper
- Negri, E., Berardi, S., Fumagalli, L., & Macchi, M. (2020). MES-integrated digital twin frameworks. Journal of Manufacturing Systems. https://doi.org/10.1016/j.jmsy.2020.05.007
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.