New Paradigm of Data-Driven Smart Customisation through Digital Twin
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Abstract Big data is one of the most important resources for the promotion of smart customisation. With access to data from multiple sources, manufacturers can provide on-demand and customised products. However, existing research of smart customisation has focused on data generated from the physical world, not virtual models. As physical data is constrained by what has already occurred, it is limited in the identification of new areas to improve customer satisfaction. A new technology called digital twin aims to achieve this integration of physical and virtual entities. Incorporation of digital twin into the paradigm of existing data-driven smart customisation will make the process more responsive, adaptable and predictive. This paper presents a new framework of data-driven smart customisation augmented by digital twin. The new framework aims to facilitate improved collaboration of all stakeholders in the customisation process. A case study of the elevator industry illustrates the efficacy of the proposed framework.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Digital Twin in Industry: State-of-the-Art
Tao, F., Zhang, H., Liu, A., & Nee, A. Y. C. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2873186 · Cited by 5,871
Self-citationDigital twin-driven product design, manufacturing and service with big data
Tao, F., Cheng, J., Qi, Q., Zhang, M., Zhang, H., & Sui, F. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0233-1 · Cited by 2,920
Self-citationDigital twin and big data towards smart manufacturing and Industry 4.0: 360 degree comparison
Qi, Q., & Tao, F. (2018) · IEEE Access · doi:10.1109/access.2018.2793265 · Cited by 1,716
Self-citationEnabling technologies and tools for digital twin
Qi, Q., Tao, F., Hu, T., Anwer, N., Liu, A., Wei, Y., Wang, L., & Nee, A. Y. C. (2021) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.10.001 · Cited by 1,579
Self-citationWang, G., Gunasekaran, A., Ngai, E. W. T., & Papadopoulos, T. (2016) · International Journal of Production Economics · doi:10.1016/j.ijpe.2016.03.014 · Cited by 1,545
About The Importance of Autonomy and Digital Twins for the Future of Manufacturing
Rosen, R., von Wichert, G., Lo, G., & Bettenhausen, K. D. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.06.141 · Cited by 1,474
Digital twin driven prognostics and health management for complex equipment
Tao, F., Zhang, M., Liu, Y., & Nee, A. Y. C. (2018) · CIRP Annals · doi:10.1016/j.cirp.2018.04.055 · Cited by 1,000
Self-citation
Cited by
Digital twin for smart manufacturing, A review
Soori, M., Arezoo, B., & Dastres, R. (2023) · Sustainable Manufacturing and Service Economics · doi:10.1016/j.smse.2023.100017 · Cited by 326
A framework for data-driven digital twins of smart manufacturing systems
Friederich, J., Francis, D. P., Lazarova-Molnar, S., & Mohamed, N. (2022) · Computers in Industry · doi:10.1016/j.compind.2021.103586 · Cited by 323
Zhao, J., Feng, H., Chen, Q., & Garcia de Soto, B. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.104028 · Cited by 192
Iliuţă, M.-E., Moisescu, M.-A., Pop, E., Ionita, A.-D., Caramihai, S.-I., & Mitulescu, T.-C. (2024) · Applied Sciences · doi:10.3390/app14135454 · Cited by 134
“At the beginning of life (in the product design stage), as mentioned in [32], DTs can be used to pre-identify customer requirements and correctly interpret the data based on some design parameters, using the results obtained by following the interaction with the product.”
Zeb, S., Mahmood, A., Hassan, S. A., Piran, M. J., Gidlund, M., & Guizani, M. (2022) · Journal of Network and Computer Applications · doi:10.1016/j.jnca.2021.103309 · Cited by 132
Metadata
- Authors
- Wang, X., Wang, Y., Tao, F., & Liu, A.
- Venue
- Journal of Manufacturing Systems
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 58
- Pages
- 270-280
- ISSN
- 0278-6125 (ISSN-L)
- OpenAlex
- W3049468025
- Cited by
- 147
- References
- 7
- FWCI
- 13.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.