Fiber-reinforced alkali-activated concrete: A review
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
of concrete, the roughness of interface, and the so-lution ’ s strength activated by alkalis. Regardless of fiber type, AAC ’ s modulus of elasticity is linearly correlated with compressive strength. Fibers can affect the modulus of concrete due to the stiffness of the fiber and the porosity of the composite. Poisson ’ s ratio for AAC corresponded to the ASTM C469-14 standard (about 0.22) and decreased to about 0.15 – 0.21 with silica fume addition. There are limited resources for the experimental Poisson ’ s ratio and it is only estimated using the predictive equations available. Therefore, it is necessary to conduct additional experimental studies to estimate Poisson ’ s ratios for FR-AAC composites. Retention of 59% and 44% in flexural strength during exposure at 800 ◦ C and 1050 ◦ C was observed in the FR-AAC stainless steel composite, and the chopped alumina fibers achieved higher yield strength at these temperatures. For FA-based AAC mortars with 1% SF with a hooked end, activated with a solution of NaOH and sodium silicate, an increase in the number of bends increased the bond strength, load pull-out and maximum pull-out strength. Autogenous shrinkage and drying shrinkage increase with higher silicate content, while shrinkage decreases with higher NaOH concentration. Relatively little research has been completed on FR-AAC in terms of durability or different environmental conditions. In addition, trends of development research toward the broad understanding regarding the application possibilities of FR-AAC as appropriate concrete materials for developing robust and green concrete composites for modern construction were extensively reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
One-part alkali-activated materials: A review
Luukkonen, T., Abdollahnejad, Z., Yliniemi, J., Kinnunen, P., & Illikainen, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.10.001 · Cited by 1,456
Cited by
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Self-citationZhou, Y., Xiao, J., Deng, Z., Yang, H., Mei, J., & Huang, J. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.143856 · Cited by 11
Metadata
- Authors
- Amran, M., Fediuk, R., Abdelgader, H. S., Murali, G., Ozbakkaloglu, T., Lee, Y. H., & Lee, Y. Y.
- Venue
- Journal of Building Engineering
- Publisher
- Elsevier BV
- Published
- 2022-01
- Volume
- 45
- Pages
- 103638
- ISSN
- 2352-7102 (ISSN-L)
- OpenAlex
- W3213071652
- Cited by
- 201
- References
- 2
- FWCI
- 18.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fiber-reinforced alkali-activated concrete: A review. https://app.cochat.ai/papers/10.1016/j.jobe.2021.103638
- The paper
- Amran, M., Fediuk, R., Abdelgader, H. S., Murali, G., Ozbakkaloglu, T., Lee, Y. H., & Lee, Y. Y. (2022). Fiber-reinforced alkali-activated concrete: A review. Journal of Building Engineering. https://doi.org/10.1016/j.jobe.2021.103638
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.